| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| ACRONAL® 3630 | BASF Dispersions & Resins | ACRONAL 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, ta...view more ACRONAL 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. view less | |
| ACRONAL® 4 F | BASF Dispersions & Resins | ACRONAL 4 F is an all acrylic liquid plasticizer. It is resistant to light and aging and can be used for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. It also features a lower lev...view more ACRONAL 4 F is an all acrylic liquid plasticizer. It is resistant to light and aging and can be used for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. It also features a lower level of polymerization. This viscous liquid is used, particularly in combination with nitrocellulose, for formulating paper and film coatings, sealing wax, coatings for light metals and plastics and cellulose lacquers. view less | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | ACRONAL 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4250 | BASF Dispersions & Resins | ACRONAL 4250 is a premium elastomeric recommended for use in zinc-oxide free formulations, has excellent adhesion to various substrates, and is code compliant. | |
| ACRONAL® 4400 | BASF Dispersions & Resins | ACRONAL 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates,...view more ACRONAL 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, ACRONAL 4400 - when combined with BASF’s QUICK-TRIGGER® 4333 additive - delivers early rain resistance under even the most challenging weather conditions. ACRONAL 4400 was value engineered to provide environmental benefits in zinc-free roof coating formulations and comply with the performance parameters of ASTM D 6083 & California Title 24 protocols. view less | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | ACRONAL A 220 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. ACRONAL A 220 NA is a versatile acrylic polymer. Excellent clarity and non-yellow...view more ACRONAL A 220 NA is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. ACRONAL A 220 NA is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. view less | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | ACRONAL N 284 NA is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion...view more ACRONAL N 284 NA is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain ACRONAL N 284 NA also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. view less | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | ACRONAL NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good co...view more ACRONAL NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain ACRONAL NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. view less | |
| BASONAT® HB 100 | BASF Dispersions & Resins | BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior p...view more BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HB 175 MP/X | BASF Dispersions & Resins | BASONAT HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for applications su...view more BASONAT HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HB 475 B/X | BASF Dispersions & Resins | BASONAT HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: interi...view more BASONAT HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HI 100 NG | BASF Dispersions & Resins | BASONAT HI 100 NG is a solvent-free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | |
| BASONAT® HI 2000 NG | BASF Dispersions & Resins | BASONAT HI 2000 NG is a solvent-free, low viscosity aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | |
| BASONAT® HW 1000 | BASF Dispersions & Resins | BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for app...view more BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HW 1180 PC | BASF Dispersions & Resins | BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric disper...view more BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1180 PC is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications and interior/exterior automotive OEM or refinish applications. view less | |
| BASONAT® HW 2000 | BASF Dispersions & Resins | BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/f...view more BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/flexibility for demanding applications. view less | |
| BASONAT® HW 2100 | BASF Dispersions & Resins | BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-f...view more BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-friendly and durable high-performance 2K PU industrial coatings. view less | |
| BUTOFAN® 4000 | BASF Dispersions & Resins | BUTOFAN 4000 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent heat-age stability, fold durability and tear resistance. It is suitable for use with cellulosic materials, cellulosic filters, gas...view more BUTOFAN 4000 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent heat-age stability, fold durability and tear resistance. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, and as saturant for masking tapes. view less | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | BUTOFAN NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| CHIMASSORB® 81 | BASF Dispersions & Resins | CHIMASSORB 81 is a solid UV absorber of the 2-hydroxy-benzophenone class. This product significantly improves the resistance of clear coatings to failures upon exposure to sunlight such as discoloration, cracking, loss of gloss and loss of adhesion. Its p...view more CHIMASSORB 81 is a solid UV absorber of the 2-hydroxy-benzophenone class. This product significantly improves the resistance of clear coatings to failures upon exposure to sunlight such as discoloration, cracking, loss of gloss and loss of adhesion. Its performance in outdoor applications can be improved further by use in synergistic combination with a hindered amine light stabilizer (HALS) such as TINUVIN® 292 or TINUVIN 123. The use of CHIMASSORB 81 should be reserved for applications where expectations of the final coating’s durability are moderate since the light stability of 2-hydroxy-benzophenone derivatives is known to be limited. view less | |
| Cinergi™ 2022 A | Lawter | Cinergi™ 2022 A is a proprietary gloss varnish that has the benefit of a soft gel body and is 100% non-volatile. It has a linseed oil base and is ideally suited for use in sheet-fed ink applications. | |
| Flexonic™ 601 A | Lawter | Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming ...view more Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming without impacting on water resistance or contributing to incompatibility. Flexonic™ 601 A is suited for use in aqueous flexographic and gravure inks and in aqueous paper, metal, wood and OPV coatings. view less | |
| Flexonic™ 902 A | Lawter | Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foa...view more Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foaming without impacting on incompatibility or water resistance. Flexonic™ 902 A is suited for use in aqueous flexographic and gravure inks and in aqueous wood, paper, metal and OPV coatings. view less | |
| Halex™ A | Lawter | Halex™ A is a water and alcohol repellent sheet-fed gloss varnish that has been modified for high water repellence. Its high tack can be reduced using small amounts of aliphatic diluents or drying oil. It offers the benefit of good gloss and rub resistanc...view more Halex™ A is a water and alcohol repellent sheet-fed gloss varnish that has been modified for high water repellence. Its high tack can be reduced using small amounts of aliphatic diluents or drying oil. It offers the benefit of good gloss and rub resistance in ink formulations that use the product. It is considered a water-fighting varnish with applications in sheet-fed and letterpress inks. view less | |
| IRGAFOS® 126 | BASF Dispersions & Resins | IRGAFOS 126 is a high performance organo-phosphite processing stabilizer that protects polymers from thermo-oxidative degradation during processing (compounding, pelletizing, fabrication, recycling) by decomposing hydroperoxides to form non-radical, non-r...view more IRGAFOS 126 is a high performance organo-phosphite processing stabilizer that protects polymers from thermo-oxidative degradation during processing (compounding, pelletizing, fabrication, recycling) by decomposing hydroperoxides to form non-radical, non-reactive products. This product is recommended for applications such as: solvent-based coatings, hot-melt adhesives, and powder coatings. view less | |
| IRGAFOS® 168 | BASF Dispersions & Resins | IRGAFOS 168 is a hydrolytically stable organo-phosphite processing stabilizer. As a secondary antioxidant, it reacts during processing with hydroperoxides formed by auto-oxidation of polymers preventing process induced degradation and extending the perfor...view more IRGAFOS 168 is a hydrolytically stable organo-phosphite processing stabilizer. As a secondary antioxidant, it reacts during processing with hydroperoxides formed by auto-oxidation of polymers preventing process induced degradation and extending the performance of primary antioxidants. This product is recommended for applications such as: solvent-based coatings, hot-melt & construction adhesives, and powder coatings. view less | |
| IRGANOX® 1010 | BASF Dispersions & Resins | IRGANOX 1010 is used in polyolefins such as polyethylene, polypropylene, polybutene, as well as, in olefin co-polymers such as ethylene vinyl acetate co-polymers. It is also recommended for the processing of polymers such as polyacetals, polyamides, and p...view more IRGANOX 1010 is used in polyolefins such as polyethylene, polypropylene, polybutene, as well as, in olefin co-polymers such as ethylene vinyl acetate co-polymers. It is also recommended for the processing of polymers such as polyacetals, polyamides, and polyurethanes, polyesters, PVC, styrene homo- and co-polymers, ABS, elastomers such as butyl rubber (IIR), SBS, SEBS, EPM, and EPDM, other synthetic rubbers, hot melt & construction adhesives, natural and synthetic tackifiers resins, waxes, and other organic substrates. It has good compatibility, high resistance to extraction, low volatility, and odorless. IRGANOX 1010 can be used in combination with other additives such as co-stabilizers (thioethers, phosphites, phosphonites), light stabilizers, and other functional stabilizers.This product is a highly effective, non-discoloring, sterically hindered primary phenolic antioxidant stabilizer that protects organic substrates against thermo-oxidative degradation. view less | |
| IRGANOX® 1035 | BASF Dispersions & Resins | IRGANOX 1035 is a sulfur-containing, primary (phenolic) antioxidant and heat stabilizer used for processing stabilization of polyethylene wire and cable resins. IRGANOX 1035 is used in polyolefins, namely polyethylene, polypropylene, polybutene, as well a...view more IRGANOX 1035 is a sulfur-containing, primary (phenolic) antioxidant and heat stabilizer used for processing stabilization of polyethylene wire and cable resins. IRGANOX 1035 is used in polyolefins, namely polyethylene, polypropylene, polybutene, as well as, in other polymers such as styrene homo- and co-polymers. It may also be used in linear polyesters, PVC, polyamides, and polyurethanes, elastomers such as SBS, EPR, EPDM, and other synthetic rubbers, adhesives, natural and synthetic tackifiers resins and other organic substrates. Additionally, it is recommended for use in wire and cable resin applications containing carbon black. view less | |
| IRGANOX® 1076 | BASF Dispersions & Resins | IRGANOX 1076 is a highly efficient, non-discoloring, sterically hindered primary phenolic antioxidant stabilizer that protects organic substrates against thermo-oxidative degradation. It offers good compatibility with most substrates, high resistance to e...view more IRGANOX 1076 is a highly efficient, non-discoloring, sterically hindered primary phenolic antioxidant stabilizer that protects organic substrates against thermo-oxidative degradation. It offers good compatibility with most substrates, high resistance to extraction, low volatility, light stability, and excellent color retention. This product is recommended for applications such as: solvent-based coatings, hot-melt & construction adhesives, and powder coatings. view less | |
| IRGASTAB® FS 301 FF | BASF Dispersions & Resins | IRGASTAB FS 301 FF is a phenol-free processing stabilizer system. It has excellent color control and compatibility, low volatility, and high resistance to extraction. | |
| IRGASTAB® PLUS 5170 | BASF Dispersions & Resins | IRGASTAB PLUS 5170 is a synergetic blend of thermal stabilizers for hot melt adhesives to be used during processing or application. | |
| IRGASTAB® PLUS 5190 | BASF Dispersions & Resins | IRGASTAB PLUS 5190 is a synergetic blend of thermal stabilizers for hot melt adhesives. It is designed for high stress treatment either during processing or during application. | |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | IRGASTAB UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. It is highly miscible in acrylate monomers and oligomers. | |
| JONCRYL® 2981 | BASF Dispersions & Resins | JONCRYL 2981 is a one-pack, self-crosslinking acrylic dispersion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This dispersion offers excellent clarity, weatherability, and excellent chemic...view more JONCRYL 2981 is a one-pack, self-crosslinking acrylic dispersion that is non-formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. This dispersion offers excellent clarity, weatherability, and excellent chemical resistance. The chemical resistance of JONCRYL 2981 may allow its use in other applications, such as concrete coatings, specialty hardboard, metal, and plastics. view less | |
| JONCRYL® 963 | BASF Dispersions & Resins | JONCRYL 963 is a very soft, flexibilizing, reactive modifier resin for use in high solids systems for low VOC coatings systems. It acts as a VOC reducer in coatings formulations that is a 98+% solids, pourable liquid at room temperature. Compared to JONCR...view more JONCRYL 963 is a very soft, flexibilizing, reactive modifier resin for use in high solids systems for low VOC coatings systems. It acts as a VOC reducer in coatings formulations that is a 98+% solids, pourable liquid at room temperature. Compared to JONCRYL 960, JONCRYL 963 exhibits better acid-etch resistance and improved weathering properties. JONCRYL 963 is also styrene free. view less | |
| JONCRYL® WAX 120 | BASF Dispersions & Resins | JONCRYL WAX 120 is a paraffin/polyethylene wax emulsion for overprint varnish, industrial coating, and functional packaging coating applications. It is designed for water shedding, heat release, and low COF with FDA acceptability. It combines the film for...view more JONCRYL WAX 120 is a paraffin/polyethylene wax emulsion for overprint varnish, industrial coating, and functional packaging coating applications. It is designed for water shedding, heat release, and low COF with FDA acceptability. It combines the film forming and water shedding characteristics of paraffin wax with the durability and broad compatibility of polyethylene wax. view less | |
| JONCRYL® WAX 26 | BASF Dispersions & Resins | JONCRYL WAX 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overpri...view more JONCRYL WAX 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overprint varnish and gravure applications. view less | |
| JONCRYL® WAX 28 | BASF Dispersions & Resins | JONCRYL WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. | |
| JONCRYL® WAX 4 | BASF Dispersions & Resins | JONCRYL WAX 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use l...view more JONCRYL WAX 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. For this reason, this product is extremely effective. JONCRYL WAX 4 is recommended for printing inks for flexographic or gravure applications, and interior/exterior wood coatings for flooring, furniture, or millwork applications. view less | |
| LAROMER® EA 9101 | BASF Dispersions & Resins | LAROMER EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good c...view more LAROMER EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good crosslinker due to its high functionality. The medium double bond density makes it a prime choice as flexibiliser for hard, rigid films as for example for those based on bisphenol A epoxy diacrylate. The high flexibility supports substrate wetting with good flow and levelling and improves adhesion on polar metal surfaces. LAROMER EA 9101 is compatible with all mono- and multifunctional monomers as well as with all common polyester acrylates, epoxy acrylates and urethane acrylates. LAROMER EA 9101 is an important formulation component for UV/EB low migration inks and overprint varnishes due to its high molecular weight. view less | |
| LAROMER® PA 9083 | BASF Dispersions & Resins | LAROMER PA 9083 is a methacrylated phosphoric acid ester. Due to the high acid value, this co-binder acts as an excellent adhesion promoter in UV curable coatings, printing inks, and overprint varnishes. | |
| LAROMER® PO 9102 | BASF Dispersions & Resins | LAROMER PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates fr...view more LAROMER PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates from paper and board over plastic films to metal. Main properties are its low surface tension that promotes flow and levelling and together with its propoxylation greatly facilitates pigment wetting. The low shrinkage also supports adhesion on plastics and imparts flexibility. LAROMER PO 9102 is a key monomer for the formulation of UV inkjet inks with its low viscosity, good flexibility and outstanding substrate and pigment wetting properties. view less | |
| LIGNOSTAB® 1198 | BASF Dispersions & Resins | LIGNOSTAB 1198 can be used to prevent natural, light-shade wood substrates from yellowing and darkening when exposed to diffused or direct sunlight. It protects wood by inhibiting the photooxidation of lignin and acts by simple aqueous pretreatment of the...view more LIGNOSTAB 1198 can be used to prevent natural, light-shade wood substrates from yellowing and darkening when exposed to diffused or direct sunlight. It protects wood by inhibiting the photooxidation of lignin and acts by simple aqueous pretreatment of the substrate. For tinted wood, it can be used directly within aqueous or hydro-alcoholic tinting solutions or stains. Synergistic and durable protection effects against wood discoloration and degradation are obtained when it is associated with a UV absorber. The latter can be used in the pretreatment or stain itself or preferably in a subsequently applied topcoat. With this photo-protection concept, attained wood color stabilities and improved coating durability can be achieved. The protection degree may depend on the wood species and for tinted wood on the type and saturation of the colorant. Applications that can benefit from LIGNOSTAB 1198 include indoor parquetry and furniture as well as outdoor wood and timber work (doors, windows, cladding, paneling, fencing, decking, shingles, beams, etc.) view less | |
| LUHYDRAN® A 848 S | BASF Dispersions & Resins | LUHYDRAN A 848 S is a self-crosslinking white emulsion suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. LUHYDRA...view more LUHYDRAN A 848 S is a self-crosslinking white emulsion suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. LUHYDRAN A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. view less | |
| LUHYDRAN® S 938 T | BASF Dispersions & Resins | LUHYDRAN S 938 T is APEO-free, crosslinkable emulsion that can be crosslinked with aliphatic polyisocyanates like BASONAT® HW 100 for two-pack polyurethane finishes. This product can be used for industrial heat-curable coatings, for example furniture lami...view more LUHYDRAN S 938 T is APEO-free, crosslinkable emulsion that can be crosslinked with aliphatic polyisocyanates like BASONAT® HW 100 for two-pack polyurethane finishes. This product can be used for industrial heat-curable coatings, for example furniture laminates or other substrates. Coatings formulated with LUHYDRAN S 938 T are hard, lightfast, and provide block and chemical resistance. view less | |
| LUTONAL® M 40 50% in Water | BASF Dispersions & Resins | LUTONAL M 40 50% in water is the product of choice for plasticizing and improving the adhesion of cellulose nitrate. Although it dissolves in water, cellulose nitrate films with up to 30 % LUTONAL M 40 are not abnormally sensitive to water. LUTONAL M 40 i...view more LUTONAL M 40 50% in water is the product of choice for plasticizing and improving the adhesion of cellulose nitrate. Although it dissolves in water, cellulose nitrate films with up to 30 % LUTONAL M 40 are not abnormally sensitive to water. LUTONAL M 40 in the form of the aqueous solution can also be used in the production of heat-sensitive mixtures based on polymer dispersions and natural rubber latex. view less | |
| Miraglaze™ 2540 A | Lawter | Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 ...view more Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 A are its tack stability, "stay open" properties and free-flow ability. Applications include overprints, specifically wet and dry traps and non-imprintable systems. view less | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...view more Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. view less | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...view more Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. view less | |
| Optilith™ 3094 A | Lawter | Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is usefu...view more Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is useful in heatset inks where metallic driers might be needed to attain the necessary squalene resistance. Apart from uses in heatset inks, Optilith™ 3094 A can be used in sheet-fed inks, although at lower levels. view less | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...view more Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. view less | |
| Optilith™ AM A | Lawter | Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fe...view more Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fed offset inks and in metal deco and OPV applications. view less | |
| Optilith™ TRG A | Lawter | Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use...view more Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use in all oil-based offset inks including sheet-fed, heatset and web no-heat applications. view less | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...view more Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. view less | |
| QUICK-TRIGGER® 4333 | BASF Dispersions & Resins | QUICK-TRIGGER 4333 can be used to achieve early rain resistance when combined with BASF's ACRONAL® resins in roof coating formulations. | |
| SOLYFAST™ 0010 | BASF Dispersions & Resins | SOLYFAST 0010 is designed for use into 2K PUR systems both clear and pigmented, such as coatings used for the protection of plastics, wood and metal substrates. Furthermore, thanks to its broad absorption spectra, it can be used into pigmented coatings. I...view more SOLYFAST 0010 is designed for use into 2K PUR systems both clear and pigmented, such as coatings used for the protection of plastics, wood and metal substrates. Furthermore, thanks to its broad absorption spectra, it can be used into pigmented coatings. It is particularly recommended when fast catalysis is required and – at the same time – a longer pot-life of the formulation than with non- latent catalysts is desired view less | |
| SOVERMOL® 1092 | BASF Dispersions & Resins | SOVERMOL 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moistur...view more SOVERMOL 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less | |
| SOVERMOL® 750 | BASF Dispersions & Resins | SOVERMOL 750 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and casting materials and is suitable for UV-stable and weather-resistant coatings. It shows particular water rep...view more SOVERMOL 750 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and casting materials and is suitable for UV-stable and weather-resistant coatings. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...view more Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. view less | |
| Stirinol™ 98 A | Lawter | Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use ...view more Stirinol™ 98 A is a heatset wax compound to give good rub and slip in heatset inks used to print catalogs, tabloids and publication inserts. It disperses easily, retains gloss and has good re-crystallization resistance. Stirinol™ 98 A is suitable for use in heatset offset inks and in hot foil stamping applications. view less | |
| STYROFAN® 4104 | BASF Dispersions & Resins | STYROFAN 4104 is a unique styrene butadiene used in air weather barriers, waterproofing, mortar modification and as a moisture vapor emission barrier over 'green' concrete. It offers very low water uptake and vapor transmission. This product is non-APEO a...view more STYROFAN 4104 is a unique styrene butadiene used in air weather barriers, waterproofing, mortar modification and as a moisture vapor emission barrier over 'green' concrete. It offers very low water uptake and vapor transmission. This product is non-APEO and non-ammonia. view less | |
| STYROFAN® 4922 X | BASF Dispersions & Resins | STYROFAN 4922 X is an aqueous carboxylated styrene-butadiene copolymer dispersion. It is used mainly as a blend component for modifying formulations to give a hard phase to the finished article. | |
| TINOPAL® OB CO | BASF Dispersions & Resins | TINOPAL OB CO is a fluorescent optical brightener that provides excellent heat resistance, high chemical stability, and brilliant bluish whitening effects with good compatibility in a wide range of resins for coating and printing ink applications. This pr...view more TINOPAL OB CO is a fluorescent optical brightener that provides excellent heat resistance, high chemical stability, and brilliant bluish whitening effects with good compatibility in a wide range of resins for coating and printing ink applications. This product is a yellow powder. view less | |
| TINOPAL® SFP | BASF Dispersions & Resins | TINOPAL SFP is a fluorescent optical brightener that provides anti-stain properties and brilliant bluish whitening effects in photographic color developer baths to enhance the apparent whiteness of processed color prints, where it may also act as both an ...view more TINOPAL SFP is a fluorescent optical brightener that provides anti-stain properties and brilliant bluish whitening effects in photographic color developer baths to enhance the apparent whiteness of processed color prints, where it may also act as both an optical brightener and as anti-stain agent. This product is a light yellow powder. view less | |
| TINUVIN® 1130 | BASF Dispersions & Resins | TINUVIN 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. B...view more TINUVIN 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. Because of its broad UV absorption, it also provides efficient protection to light sensitive substrates such as wood and plastics. TINUVIN 1130 can be used in waterborne and solvent borne coating applications. view less | |
| TINUVIN® 123 | BASF Dispersions & Resins | TINUVIN 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate sys...view more TINUVIN 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate systems or one-coat opaque thermosetting acrylate and polyester coatings. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts. Its efficiency provides significant improvement in coatings performance by minimizing paint defects such as cracking and gloss reduction for clear coats as well as chalking for pigmented paints. view less | |
| TINUVIN® 152 | BASF Dispersions & Resins | TINUVIN 152 is a high performance Hindered Amine Light Stabilizer (HALS) that significantly improves coating durability. It minimizes paint degradation that could otherwise lead to cracking and gloss loss in clear coats, and also chalking in pigmented pai...view more TINUVIN 152 is a high performance Hindered Amine Light Stabilizer (HALS) that significantly improves coating durability. It minimizes paint degradation that could otherwise lead to cracking and gloss loss in clear coats, and also chalking in pigmented paints. TINUVIN 152 provides superior compatibility and prolonged effectiveness in polar, highly crosslinked coating systems where conventional HALS may be incompatible. These coatings include polyester or acrylic urethanes, and highly crosslinked polyester or acrylic melamine systems. TINUVIN 152 is especially designed for coatings over plastic substrates. view less | |
| TINUVIN® 249 | BASF Dispersions & Resins | TINUVIN 249 is a liquid non-basic HALS for coatings. It is designed to meet the high performance and durability requirements of all solvent-based automotive, industrial and decorative coatings where other HALS fail either related to their basicity or for ...view more TINUVIN 249 is a liquid non-basic HALS for coatings. It is designed to meet the high performance and durability requirements of all solvent-based automotive, industrial and decorative coatings where other HALS fail either related to their basicity or for compatibility reasons. view less | |
| TINUVIN® 292 | BASF Dispersions & Resins | TINUVIN 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to solid...view more TINUVIN 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to solidify, even at room temperature. The efficiency of TINUVIN 292 provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss. The dispersion of TINUVIN 292 in waterborne coatings may be facilitated by dilution with a watermiscible solvent such as butylcarbitol. The performance of TINUVIN 292 can be significantly improved when used in combination with a UV absorber such as recommended below. These synergistic combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. view less | |
| TINUVIN® 292 HP | BASF Dispersions & Resins | TINUVIN 292 HP is a liquid hindered amine light stabilizer especially developed for color sensitive coating applications. TINUVIN 292 HP is a very pure mixture of two active ingredients that help maintain this products’ liquid state. It provides significa...view more TINUVIN 292 HP is a liquid hindered amine light stabilizer especially developed for color sensitive coating applications. TINUVIN 292 HP is a very pure mixture of two active ingredients that help maintain this products’ liquid state. It provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss without adding additional color to the formulation. view less | |
| TINUVIN® 384-2 | BASF Dispersions & Resins | TINUVIN 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental cond...view more TINUVIN 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental conditions. It has been designed to fulfill the high performance and durability requirements of automotive and industrial high quality finishes. Its broad UV absorption allows efficient protection of light sensitive base coats or substrates such as wood and plastics. Since its absorption spectrum does not tail significantly into the visible region, it is an ideal UV absorber for those systems where initial yellowing must be kept to a minimum. view less | |
| TINUVIN® 400 | BASF Dispersions & Resins | TINUVIN 400 is a liquid hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs of waterborne, solventborne, and 100% solids automotive and industrial finishes. Its low color and stability make it an excellen...view more TINUVIN 400 is a liquid hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs of waterborne, solventborne, and 100% solids automotive and industrial finishes. Its low color and stability make it an excellent choice for all coatings where low color characteristics are ideal for use in combination with the newest generation photoinitiators to provide durable UV clear coats. view less | |
| TINUVIN® 400-DW (N) | BASF Dispersions & Resins | TINUVIN 400-DW (N) is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulf...view more TINUVIN 400-DW (N) is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill the high cost/performance and durability requirements of interior and exterior industrial, decorative and automotive coatings. The high thermal stability and photo-permanence makes it suitable for coatings exposed to high bake temperatures and/or to extreme environmental conditions. view less | |
| TINUVIN® 405 | BASF Dispersions & Resins | TINUVIN 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. For outdoor applications, TINUVIN 405 needs...view more TINUVIN 405 is a solid triazine-based UV absorber for coatings. It was designed to meet the high performance and durability requirements of acrylic powder coatings for transportation and industrial applications. For outdoor applications, TINUVIN 405 needs to be combined with a hindered amine light stabilizer (HALS) such as TINUVIN 144 or TINUVIN 152. This product is a light yellow powder. view less | |
| TINUVIN® 460 | BASF Dispersions & Resins | TINUVIN 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silver ...view more TINUVIN 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silver halide photographic papers or overprint varnishes. This product is a slightly yellow powder. view less | |
| TINUVIN® 477 | BASF Dispersions & Resins | TINUVIN 477 is a liquid, high performance UV absorber developed for solventborne and liquid UV curable coatings. Based on a red shifted Tris-Resorcinol-Triazine chromophore, it is suited for the protection of UVA range sensitive substrates or ingredients. | |
| TINUVIN® 477-DW (N) | BASF Dispersions & Resins | TINUVIN 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high heat...view more TINUVIN 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high heat stability and excellent photo-permanence provide superior UV stabilization and fulfill the requirements of high performance industrial, decorative, and wood coatings. view less | |
| TINUVIN® 479 | BASF Dispersions & Resins | TINUVIN 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal cat...view more TINUVIN 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal catalyzed coating systems or in coatings applied on base coats containing such catalysts. Its high extinction coefficient allows the formulation of coatings with reduced UV absorber levels and / or thin film applications. Combinations especially with other HPT UV absorbers and the newest generation photoinitiators makes it an excellent choice for UV curing coatings. TINUVIN 479 is recommended for automotive OEM and refinish systems, UV cured coatings, and industrial finishes where long life performance is essential. Due to the high extinction coefficient and superior photostability applications specifically include thin film applications. Depending on the application, the spectral coverage can be further broadened through combinations with other UV absorbers of the hydroxyphenyl-triazine or hydroxyphenyl-benzotriazole class such as TINUVIN 400 or TINUVIN 928. view less | |
| TINUVIN® 5050 | BASF Dispersions & Resins | TINUVIN 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne ind...view more TINUVIN 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings. The broad UV absorbance of TINUVIN 5050 makes it suitable for a wide range of coatings for wood, plastics and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less | |
| TINUVIN® 5060 | BASF Dispersions & Resins | TINUVIN 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne...view more TINUVIN 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings and is especially suited for oxidative drying and acid catalyzed systems. The broad UV absorbance of the used UVA of TINUVIN 5060 makes it suitable for a wide range of coatings for wood, plastics, and metal. The non-basic character of the used NOR HALS prevents possible interactions with acidic paint ingredients such as catalysts, biocides, and pigments. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less | |
| TINUVIN® 5100 | BASF Dispersions & Resins | TINUVIN 5100 is a liquid, non-basic aminoether (NOR) hindered amine light stabilizer (HALS) developed especially to give high durability to exterior industrial and decorative coatings. It is specifically designed and manufactured for coatings where a low ...view more TINUVIN 5100 is a liquid, non-basic aminoether (NOR) hindered amine light stabilizer (HALS) developed especially to give high durability to exterior industrial and decorative coatings. It is specifically designed and manufactured for coatings where a low basicity, non-interacting and high value stabilizer is required. Based on amino-ether functionality, its low basicity reduces possible interactions with acidic paint components such as curing catalysts. Its high efficiency provides significant improvement of coating performance by minimizing paint degradation that causes cracking and gloss reduction of clear coats as well as chalking and fading of pigmented paints. view less | |
| TINUVIN® 5151 | BASF Dispersions & Resins | TINUVIN 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solvent...view more TINUVIN 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of TINUVIN 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. view less | |
| TINUVIN® 5248 | BASF Dispersions & Resins | TINUVIN 5248 is a liquid light stabilizer blend containing a triazine-based UV absorber and a basic HALS for coatings, adhesives, and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based automotive, indu...view more TINUVIN 5248 is a liquid light stabilizer blend containing a triazine-based UV absorber and a basic HALS for coatings, adhesives, and sealants. It was designed to meet high performance and durability requirements of exterior solvent-based automotive, industrial, architectural, and decorative coatings including energy curable systems (UV, electron beam). It is especially suitable for clear coatings with a layer thickness from 40 – 80 µm and low pigmented coatings exposed to high baking temperatures and/or to extreme environmental conditions. view less | |
| TINUVIN® 5333-DW (N) | BASF Dispersions & Resins | TINUVIN 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of e...view more TINUVIN 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of exterior water-based industrial and architectural coatings including energy curable systems (UV, electron beam). This product is a slightly yellow dispersion. view less | |
| TINUVIN® 622 SF | BASF Dispersions & Resins | TINUVIN 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It is designed to meet high performance and durability requirements of all powder coatings as well as adhesive ...view more TINUVIN 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It is designed to meet high performance and durability requirements of all powder coatings as well as adhesive and sealant applications. It protects coatings from surface defects such as gloss reduction, cracking and chalking and ensures the retention of mechanical properties. In addition, it shows thermally stabilizing and antioxidant properties. view less | |
| TINUVIN® 900 | BASF Dispersions & Resins | TINUVIN 900 is a UV absorber of the hydroxyphenyl-benzotriazole class developed specifically for coating systems exposed to high temperatures and/or extreme environmental stresses. It may be used in combination with a light stabilizer of the sterically hi...view more TINUVIN 900 is a UV absorber of the hydroxyphenyl-benzotriazole class developed specifically for coating systems exposed to high temperatures and/or extreme environmental stresses. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. view less | |
| TINUVIN® 928 | BASF Dispersions & Resins | TINUVIN 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excell...view more TINUVIN 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excellent solubility and high thermal and environmental permanence makes it particularly suitable for coatings exposed to high temperature curing processes, such as powder and coil coatings, or high environmental stress. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. view less | |
| TINUVIN® 99-2 | BASF Dispersions & Resins | TINUVIN 99-2 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class designed to fulfill the high cost/performance and durability requirements of trade sales and industrial coatings. Its broad UV absorption allows efficient protection of light se...view more TINUVIN 99-2 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class designed to fulfill the high cost/performance and durability requirements of trade sales and industrial coatings. Its broad UV absorption allows efficient protection of light sensitive substrates such as wood and plastics. view less | |
| TINUVIN® 9945-DW (N) | BASF Dispersions & Resins | TINUVIN 9945-DW (N) is a solvent-free, aqueous UV absorber dispersion for high performance industrial and decorative waterborne coating applications. | |
| TINUVIN® CARBOPROTECT® | BASF Dispersions & Resins | TINUVIN CARBOPROTECT is a solid, very red-shifted benzotriazole-based UV absorber designed for solvent-based clear or semi-transparent coatings over carbon fiber-reinforced plastics (CFRP) or glass fiber-reinforced plastics (GFRP) where fibers are embedde...view more TINUVIN CARBOPROTECT is a solid, very red-shifted benzotriazole-based UV absorber designed for solvent-based clear or semi-transparent coatings over carbon fiber-reinforced plastics (CFRP) or glass fiber-reinforced plastics (GFRP) where fibers are embedded in an epoxy matrix. view less | |
| Uroset™ 100S A | Lawter | Uroset™ 100S A is a universal oil base dispersion vehicle serving as a universal base for any letterpress oil ink formations or offsets. It offers the ability to carry high pigment concentrations while delivering gloss. The product dries quickly by oxidat...view more Uroset™ 100S A is a universal oil base dispersion vehicle serving as a universal base for any letterpress oil ink formations or offsets. It offers the ability to carry high pigment concentrations while delivering gloss. The product dries quickly by oxidation and forms hard, rub-resistant films when subjected to metallic drier catalysts. It shows stability at high speeds, good transfer and leveling and utilizes more flexible ink film compared to other fast setting vehicles. Uroset™ 100S A is used in sheet-fed and letterpress inks. view less | |
| Uroset™ 9305 A | Lawter | Uroset™ 9305 A is a free-flowing heatset dispersion vehicle that possesses good pigment wetting and flow properties. The product is used in heatset inks and in web offsets for commercial printing purposes. | |
| Uroset™ FGV A | Lawter | Uroset™ FGV A is a fast-setting, sheet-fed flushing and grinding vehicle that possesses good pigment wetting, rub resistance and high gloss features. It is press stable during high speed runs and also displays good transfer and leveling. Uroset™ FGV A pro...view more Uroset™ FGV A is a fast-setting, sheet-fed flushing and grinding vehicle that possesses good pigment wetting, rub resistance and high gloss features. It is press stable during high speed runs and also displays good transfer and leveling. Uroset™ FGV A provides more ink film compared to other fast setting types and is considered ideal in sheet-fed and letterpress inks. view less | |
| UVINUL® 3039 | BASF Dispersions & Resins | UVINUL 3039 is an ultraviolet light absorber (UVA) for the stabilization of PVC-p and PVC plastisol applications. slightly yellowish, clear liquid imparts excellent light stability to a variety of polymers. Due to its good compatibility with plasticizers,...view more UVINUL 3039 is an ultraviolet light absorber (UVA) for the stabilization of PVC-p and PVC plastisol applications. slightly yellowish, clear liquid imparts excellent light stability to a variety of polymers. Due to its good compatibility with plasticizers, it is particularly suitable for the stabilization of PVC-p and PVC plastisols. In addition, it can be used in PUR, polyesters and PMMA applications. view less |
