| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...view more 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...view more 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...view more 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...view more 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...view more 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...view more 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...view more 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...view more 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...view more 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...view more 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| AGITAN® 100 | Munzing Chemie | AGITAN® 100 is a liquid white blend of hydrophobic silica, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 103 | Munzing Chemie | AGITAN® 103 is a liquid white blend of modified fatty derivatives, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 105 | Munzing Chemie | AGITAN® 105 is a liquid white blend of modified fatty compounds, hydrophobic silica, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 107 | Munzing Chemie | AGITAN® 107 is a liquid white blend of hydrophobic silica and alkoxylated compounds in emulsion form. It has excellent stability and defoaming efficiency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 109 | Munzing Chemie | AGITAN® 109 is a liquid white blend of hydrophobic silica, alkoxylated compounds and vegetable oils in emulsion form. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 120 | Munzing Chemie | AGITAN® 120 is a liquid white emulsion of modified fatty compounds, hydrophobic silica, alkoxylated compounds, polysiloxane copolymer and emulsifiers in water. It has excellent stability and defoaming persistency. It is mainly used in architectural coatin...view more AGITAN® 120 is a liquid white emulsion of modified fatty compounds, hydrophobic silica, alkoxylated compounds, polysiloxane copolymer and emulsifiers in water. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. view less | |
| AGITAN® 150 | Munzing Chemie | AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesi...view more AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. view less | |
| AGITAN® 155 | Munzing Chemie | AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adh...view more AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. view less | |
| AGITAN® 156 | Munzing Chemie | AGITAN® 156 is a liquid white blend of organic modified polysiloxanes and polyglycols emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, particularly ai...view more AGITAN® 156 is a liquid white blend of organic modified polysiloxanes and polyglycols emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers, as well as printing inks and adhesives. view less | |
| AGITAN® 160 | Munzing Chemie | AGITAN® 160 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial, architectural, and wood coatings, as well a...view more AGITAN® 160 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial, architectural, and wood coatings, as well as printing inks. view less | |
| AGITAN® 170 | Munzing Chemie | AGITAN® 170 is a liquid white blend of modified nonionic fatty compounds, hydrophobic silica and hydrocarbons, in emulsion form. It is an effective defoamer for aqueous emulsion based and water reducible systems, which is ideal for medium to high viscosit...view more AGITAN® 170 is a liquid white blend of modified nonionic fatty compounds, hydrophobic silica and hydrocarbons, in emulsion form. It is an effective defoamer for aqueous emulsion based and water reducible systems, which is ideal for medium to high viscosity systems. It is mainly used in architectural coatings and adhesives. view less | |
| AGITAN® 217 | Munzing Chemie | AGITAN® 217 is a liquid white blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers with a little silicone. It is an effective defoamer for aqueous emulsions, pigmented systems, and adhesives based on animal glue and emulsions. It ...view more AGITAN® 217 is a liquid white blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers with a little silicone. It is an effective defoamer for aqueous emulsions, pigmented systems, and adhesives based on animal glue and emulsions. It is mainly used in architectural coatings and adhesives. view less | |
| AGITAN® 218 | Munzing Chemie | AGITAN® 218 is a liquid yellow, turbid blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers with a little silicone. It is an effective defoamer for aqueous emulsions. It is mainly used in architectural and industrial coatings, as w...view more AGITAN® 218 is a liquid yellow, turbid blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers with a little silicone. It is an effective defoamer for aqueous emulsions. It is mainly used in architectural and industrial coatings, as well as adhesives. view less | |
| AGITAN® 230 | Munzing Chemie | AGITAN® 230 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and hydrocarbons. It is an effective defoamer for aqueous emulsion, and is especially effective in medium to high viscosity systems. It is mainly used in archite...view more AGITAN® 230 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and hydrocarbons. It is an effective defoamer for aqueous emulsion, and is especially effective in medium to high viscosity systems. It is mainly used in architectural and industrial coatings, as well as adhesives. view less | |
| AGITAN® 232 | Munzing Chemie | AGITAN® 232 is a liquid yellow, turbid blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers and hydrophobic silica. It is effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is m...view more AGITAN® 232 is a liquid yellow, turbid blend of liquid hydrocarbons, modified fatty compounds, nonionic emulsifiers and hydrophobic silica. It is effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is mainly used in architectural coatings. view less | |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to...view more AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal soluti...view more AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 271 | Munzing Chemie | AGITAN® 271 is a liquid yellow, opaque blend of vegetable oils and alkoxylated compounds, silica and emulsifiers, nonionic. It has strong stability and efficiency properties and is commonly used in architectural, industrial, and wood coatings, as well as ...view more AGITAN® 271 is a liquid yellow, opaque blend of vegetable oils and alkoxylated compounds, silica and emulsifiers, nonionic. It has strong stability and efficiency properties and is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 280 | Munzing Chemie | AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is com...view more AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 281 | Munzing Chemie | AGITAN® 281 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is co...view more AGITAN® 281 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 282 | Munzing Chemie | AGITAN® 282 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, non-pigmented systems, low viscosity systems and emulsion manufacturing. It is commo...view more AGITAN® 282 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It can be effective in clear coats, non-pigmented systems, low viscosity systems and emulsion manufacturing. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 295 | Munzing Chemie | AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architec...view more AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 296 | Munzing Chemie | AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and...view more AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and printing inks. view less | |
| AGITAN® 298 | Munzing Chemie | AGITAN® 298 is a liquid yellow blend of modified polyethers and nonionic emulsifiers. It should be used without further dilution and is most commonly used in paper coatings. | |
| AGITAN® 299 | Munzing Chemie | AGITAN® 299 is a liquid yellow blend of nonionic alkoxylated compounds. It is a highly effective particle-free defoamer for aqueous systems. It is commonly used in paper, industrial and architectural coatings. | |
| AGITAN® 301 | Munzing Chemie | AGITAN® 301 is a liquid yellow, turbid blend of vegetable oils, modified fatty compounds, nonionic emulsifiers with some biodegradable silicone. It is commonly used in printing inks, adhesives, and paper coatings. | |
| AGITAN® 305 | Munzing Chemie | AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...view more AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 307 | Munzing Chemie | AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...view more AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood and paper coatings, printing inks, and adhesives. view less | |
| AGITAN® 315 | Munzing Chemie | AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all...view more AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all common binders. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. view less | |
| AGITAN® 350 | Munzing Chemie | AGITAN® 350 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 351 | Munzing Chemie | AGITAN® 351 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 361 | Munzing Chemie | AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is...view more AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is ideal for clear coats, non-pigmented and low viscous systems. It is commonly used in adhesives, and architectural, industrial and wood coatings. view less | |
| AGITAN® 381 | Munzing Chemie | AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented sys...view more AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented systems and low viscosity systems. It is commonly used for adhesives, printing inks, and architectural, industrial, wood and automotive coatings. view less | |
| AGITAN® 5018 | Munzing Chemie | AGITAN® 5018 is a liquid opaque off-white blend of special wax and mineral oil. It is an effective defoamer for adhesive applicatons, as it has good comparability, and dispersion. It is commonly used for OPV and clear coatings, and PSA, laminating, packag...view more AGITAN® 5018 is a liquid opaque off-white blend of special wax and mineral oil. It is an effective defoamer for adhesive applicatons, as it has good comparability, and dispersion. It is commonly used for OPV and clear coatings, and PSA, laminating, packaging, paper, wood glue and construction adhesives. view less | |
| AGITAN® 526 | Munzing Chemie | AGITAN® 526 is a liquid white aqueous emulsion of polysiloxane polymer. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. | |
| AGITAN® 527 | Munzing Chemie | AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, indus...view more AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. view less | |
| AGITAN® 633 | Munzing Chemie | AGITAN® 633 is a liquid yellow-brown, clear blend of fatty acid derivates and hydrocarbons, nonionic, silicone-free. It is an ideal defoamer for aqueous systems of low to medium viscosity. It is commonly used for adhesives. | |
| AGITAN® 650 | Munzing Chemie | AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, an...view more AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 651 | Munzing Chemie | AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood co...view more AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 655 | Munzing Chemie | AGITAN® 655 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood a...view more AGITAN® 655 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood and industrial coatings. view less | |
| AGITAN® 656 | Munzing Chemie | AGITAN® 656 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and clear and low viscosity systems. It is commonly used ...view more AGITAN® 656 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and clear and low viscosity systems. It is commonly used in wood and industrial coatings. view less | |
| AGITAN® 700 | Munzing Chemie | AGITAN® 700 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated compounds, modified fats and nonionic emulsifiers. It is easily emulsifiable and is effective in water reducible systems and aqueous gloss emulsion systems. It is ...view more AGITAN® 700 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated compounds, modified fats and nonionic emulsifiers. It is easily emulsifiable and is effective in water reducible systems and aqueous gloss emulsion systems. It is commonly used in adhesives, and wood, architectural and industrial coatings. view less | |
| AGITAN® 701 | Munzing Chemie | AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adh...view more AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adhesives and printing inks, and wood, architectural and industrial coatings. view less | |
| AGITAN® 702 | Munzing Chemie | AGITAN® 702 is a liquid yellow, turbid blend of hydrophobic silicia and hydrocarbons. It is effective in water reducible systems and aqueous gloss emulsion systems. It is commonly used in wood and architectural coatings. | |
| AGITAN® 703 | Munzing Chemie | AGITAN® 703 is a liquid yellow, turbid blend of hydrophobic silicia and hydrocarbons nonionic emulsifiers. It is designed for finely dispersed emulsions (hydrosols), water reducible systems and gloss emulsion paints. It is commonly used in architectural, ...view more AGITAN® 703 is a liquid yellow, turbid blend of hydrophobic silicia and hydrocarbons nonionic emulsifiers. It is designed for finely dispersed emulsions (hydrosols), water reducible systems and gloss emulsion paints. It is commonly used in architectural, industrial and wood coatings. view less | |
| AGITAN® 731 | Munzing Chemie | AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...view more AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 760 | Munzing Chemie | AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...view more AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 761 | Munzing Chemie | AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coating...view more AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 765 | Munzing Chemie | AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhe...view more AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 766 | Munzing Chemie | AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and w...view more AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 767 | Munzing Chemie | AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well a...view more AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 771 | Munzing Chemie | AGITAN® 771 is a liquid yellowish solution made of siloxane copolymer in dipropylene glycol mono methylether. It is an effective siloxane defoamer with excellent persistency. It is commonly used in general industrial coatings and printing inks. | |
| AGITAN® 80 | Munzing Chemie | AGITAN® 80 is a liquid white blend of hydrophobic silica, alkoxylated compounds and emulsifiers, in emulsion. It is an emulsion with excellent stability and defoaming persistency. It is commonly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® A201 | Munzing Chemie | AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as lamina...view more AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as laminating, packaging, envelope, wood glue and construction adhesives, and water-based printing inks. view less | |
| AGITAN® A202E | Munzing Chemie | AGITAN® A202E is a liquid opaque off-white blend of special wax and mineral oil. It is a defoamer that is designed for use in emulsion polymers and various different adhesives, such as laminating, packaging, envelope, and construction adhesives. | |
| AGITAN® A203 | Munzing Chemie | AGITAN® A203 is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for architectural coatings, architectural paints and is used during the letdown stage of coatings. | |
| AGITAN® A203E | Munzing Chemie | AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral co...view more AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral coatings, and corrugated, film and foil, press-side, and screen ink printing inks, as well as PSA, laminating, packaging, envelope, labels, and acrylic adhesives. view less | |
| AGITAN® A206E | Munzing Chemie | AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acry...view more AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, and industrial water-based and wood coatings, as well as traffic paint. view less | |
| AGITAN® A208 | Munzing Chemie | AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood...view more AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood, industrial water-based and architectural coatings, as well as pigment grinding and metallic printing inks, and wood glue and construction adhesives. view less | |
| AGITAN® A209 | Munzing Chemie | AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural c...view more AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural coatings and plasters, printing inks, adhesives and paper coatings. view less | |
| AGITAN® A210 | Munzing Chemie | AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coa...view more AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coatings and plasters, UV printing inks, and adhesives. view less | |
| AGITAN® A228 | Munzing Chemie | AGITAN® A228 is a liquid opaque off-white blend of mineral oil and special wax. It is a defoamer for adhesive applications and it provides good compatibility, dispersability and longer-term performance. It is commonly used in PSA, laminating, and packagin...view more AGITAN® A228 is a liquid opaque off-white blend of mineral oil and special wax. It is a defoamer for adhesive applications and it provides good compatibility, dispersability and longer-term performance. It is commonly used in PSA, laminating, and packaging and paper adhesives, as well as OPV and clear coatings. view less | |
| AGITAN® DF 2532 | Munzing Chemie | AGITAN® DF 2532 is a liquid beige blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides high defoaming efficiency, long lasting efficiency and easy dispersion. It is commonly use...view more AGITAN® DF 2532 is a liquid beige blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides high defoaming efficiency, long lasting efficiency and easy dispersion. It is commonly used in adhesives. view less |
