| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...view more Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...view more Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...view more Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...view more Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...view more Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...view more Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...view more Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...view more Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. view less | |
| MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...view more MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...view more MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...view more MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...view more MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...view more MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...view more MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...view more MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...view more MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. view less | |
| MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...view more MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...view more MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...view more MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...view more MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...view more MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...view more MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...view more MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...view more MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. view less | |
| MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Red, VPA 596 | mk chemicals | MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Hydrocolor Bismuth Vanadate Yellow | mk chemicals | MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments tha...view more MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Black 7, VPA 26 | mk chemicals | MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that ar...view more MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Black P. Bk. 7, VPA 344/12 | mk chemicals | MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are us...view more MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Blue 15:1 | mk chemicals | MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 | mk chemicals | MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are ...view more MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Chromium Oxide Green | mk chemicals | MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...view more MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...view more MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydrocolor Green 7 | mk chemicals | MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paint...view more MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Green GN P. G. 17, VPA 344/20 | mk chemicals | MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are...view more MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Green P. G. 7, VPA 344/21 | mk chemicals | MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are use...view more MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Iron Oxide Black 306 | mk chemicals | MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...view more MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Black 318 | mk chemicals | MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...view more MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Red 110 | mk chemicals | MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...view more MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Red 130 | mk chemicals | MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...view more MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Red 160 | mk chemicals | MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...view more MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Yellow 3910 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...view more MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Iron Oxide Yellow 3920 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...view more MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Orange 34 | mk chemicals | MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Orange 5 | mk chemicals | MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Orange 943, VPA 344/23/1 | mk chemicals | MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are us...view more MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Orange P. O. 67, VPA 344/28 | mk chemicals | MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are...view more MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Red 112 | mk chemicals | MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...view more MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Red 130 M, VPA 344/19 | mk chemicals | MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in c...view more MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Red 146 | mk chemicals | MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...view more MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Red P. R. 112, VPA 437/4 | mk chemicals | MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used i...view more MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Red P. R. 122, VPA 344/26 | mk chemicals | MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used ...view more MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Red P. R. 170, VPA 344/22 | mk chemicals | MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used ...view more MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Tinting Black WD, VPA 26 | mk chemicals | MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron o...view more MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. view less | |
| MK-Hydrocolor Tiosorb WD, VPA 78 | mk chemicals | MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium diox...view more MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium dioxide pigments that are used in wood stain coatings as an U.V. absorber. view less | |
| MK-Hydrocolor Transoxide Orange WD | mk chemicals | MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide...view more MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. view less | |
| MK-Hydrocolor Transoxide Red WD | mk chemicals | MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide...view more MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. view less | |
| MK-Hydrocolor Transoxide Yellow WD | mk chemicals | MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron o...view more MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. view less | |
| MK-Hydrocolor Violet 23 | mk chemicals | MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor White 6, VPA 310/1 | mk chemicals | MK-Hydrocolor White 6, VPA 310/1 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 26% ± 1%. This product is used in the preparation of inorganic water based pigments that are ...view more MK-Hydrocolor White 6, VPA 310/1 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 26% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor White 6, VPA 79 | mk chemicals | MK-Hydrocolor White 6, VPA 79 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of inorganic water based pigments that are use...view more MK-Hydrocolor White 6, VPA 79 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor White P. W. 6, VPA 344/9 | mk chemicals | MK-Hydrocolor White P. W. 6, VPA 344/9 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used...view more MK-Hydrocolor White P. W. 6, VPA 344/9 is a white colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Yellow 13 | mk chemicals | MK-Hydrocolor Yellow 13 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 65% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Yellow 13 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 65% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Yellow 3910, VPA 344/17 | mk chemicals | MK-Hydrocolor Yellow 3910, VPA 344/17 is a yellow colored pasty to liquid pigment. It has a pH value of 60, a pigment content of 27% ± 1%, and a water value of xx% ± 1%. This product is used in the preparation of water based pigments that are used in coat...view more MK-Hydrocolor Yellow 3910, VPA 344/17 is a yellow colored pasty to liquid pigment. It has a pH value of 60, a pigment content of 27% ± 1%, and a water value of xx% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Yellow 74 | mk chemicals | MK-Hydrocolor Yellow 74 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 48.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in ...view more MK-Hydrocolor Yellow 74 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 48.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Yellow 83 | mk chemicals | MK-Hydrocolor Yellow 83 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...view more MK-Hydrocolor Yellow 83 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. view less | |
| MK-Hydrocolor Yellow P. Y. 139 VPA 344/27 | mk chemicals | MK-Hydrocolor Yellow P. Y. 139 VPA 344/27 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are ...view more MK-Hydrocolor Yellow P. Y. 139 VPA 344/27 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Yellow P. Y. 184, VPA 338/4 | mk chemicals | MK-Hydrocolor Yellow P. Y. 184, VPA 338/4 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 24.5% ± 1%. This product is used in the preparation of water based pigments that a...view more MK-Hydrocolor Yellow P. Y. 184, VPA 338/4 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 24.5% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Yellow P. Y. 74, VPA 344/3/1 | mk chemicals | MK-Hydrocolor Yellow P. Y. 74, VPA 344/3/1 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of water based pigments that are...view more MK-Hydrocolor Yellow P. Y. 74, VPA 344/3/1 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydrocolor Yellow P. Y. 83, VPA 344/6 | mk chemicals | MK-Hydrocolor Yellow P. Y. 83, VPA 344/6 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of water based pigments that are u...view more MK-Hydrocolor Yellow P. Y. 83, VPA 344/6 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. view less | |
| MK-Hydroflex Black P. Bk. 7 | mk chemicals | MK-Hydroflex Black P. Bk. 7 is a carbon black colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 32% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment pri...view more MK-Hydroflex Black P. Bk. 7 is a carbon black colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 32% ± 1%, and a water value of 54% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydroflex Blue P. B. 15:3, VPA 948/8 | mk chemicals | MK-Hydroflex Blue P. B. 15:3, VPA 948/8 is a blue colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 45% ± 1%, and a water value of 42% ± 1%. This product has good flocculation resistance and printing properties, and i...view more MK-Hydroflex Blue P. B. 15:3, VPA 948/8 is a blue colored pasty to liquid pigment. It has a pH value of 8.0 to 10.0, a pigment content of 45% ± 1%, and a water value of 42% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydroflex Blue P. B. 16, VPA 477/6 | mk chemicals | MK-Hydroflex Blue P. B. 16, VPA 477/6 is a blue colored pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 57% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment p...view more MK-Hydroflex Blue P. B. 16, VPA 477/6 is a blue colored pigment. It has a pH value of 8.5 to 9.5, a pigment content of 35% ± 1%, and a water value of 57% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydroflex Blue P. B. 61, VPA 941/2 | mk chemicals | MK-Hydroflex Blue P. B. 61, VPA 941/2 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 30% ± 1%, and a water value of 59% ± 1%. This product has good flocculation resistance and printing properties, and is u...view more MK-Hydroflex Blue P. B. 61, VPA 941/2 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 8.5, a pigment content of 30% ± 1%, and a water value of 59% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydroflex Fanal Rosa 169 | mk chemicals | MK-Hydroflex Fanal Rosa 169 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 30% ± 1%, and a water value of 55% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing pre...view more MK-Hydroflex Fanal Rosa 169 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 30% ± 1%, and a water value of 55% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less | |
| MK-Hydroflex Fanal Rose 81:2 | mk chemicals | MK-Hydroflex Fanal Rose 81:2 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing pr...view more MK-Hydroflex Fanal Rose 81:2 is a red colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 35% ± 1%, and a water value of 50% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. view less |
