| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| BRB Siloen® DA 290 | BRB International BV | BRB Siloen® DA 290 is solvent solution of a fluorosilicone fluid. It can be used as a silicone defoamer for solvent-free, solvent-borne, printing inks and ambient curing plastic system (epoxy and PU). | |
| BRB Siloen® LA 271 | BRB International BV | BRB Siloen® LA 271 is a glycol-modified silicone fluid. It is an additive for ink and coating applications, especially suitable for solvent and radiation curing with good substrate wetting. | |
| BRB Siloen® PDA 222 | BRB International BV | BRB Siloen® PDA 222 is an alkyl modified siloxane. It can be used as a dispersant processing aid for pigments, fillers and additives used in paints or plastic applications. | |
| BRB Siloen® SMA 280 | BRB International BV | BRB Siloen® SMA 280 is a 50% Polyether-modified siloxane solution in Di-propylene Glycol Methylether. It is a silicone additive for waterborne and solvent coatings with excellent slip and smoothness. | |
| BRB Siloen® SMA 283 | BRB International BV | BRB Siloen® SMA 283 is a Polyether-modified siloxane. It can be used as a silicone additive for waterborne and solvent coatings with excellent slip, smoothness and anti-crater effect. | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BRB Siloen® SMA 285 | BRB International BV | BRB Siloen® SMA 285 is a 30% active emulsion of a high molecular weight silicone urethane resin. It can be used as a silicone additive for water-based coatings. | |
| BRB Siloen® SMA 286 | BRB International BV | BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...view more BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. view less | |
| BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...view more BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. view less | |
| BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 833 | BRB International BV | BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...view more BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). view less | |
| BRB Siloen® WA 261 | BRB International BV | BRB Siloen® WA 261 is a modified trisiloxane that provides outstanding surface tension reduction and super spreading properties. It is a surface wetting additive for coatings and inks. | |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| BRB Siloen® WA 265 | BRB International BV | BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...view more BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. view less | |
| Flexisperse™ 133N | Innovative Chemical Technologies, Inc. | Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...view more Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Flexisperse™ 134NH | Innovative Chemical Technologies, Inc. | Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...view more Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Flexisperse™ 225 | Innovative Chemical Technologies, Inc. | Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities. | Request Sample |
| Flexisperse™ CA-47 | Innovative Chemical Technologies, Inc. | Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- ...view more Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- 1.0. It has a boiling point of 100 degrees Celsius and contains 46-48% solids. view less | Request Sample |
| Flexisurf™ EHDP | Innovative Chemical Technologies, Inc. | Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent,...view more Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent, and emulsifying agent. Uses include hard surface cleaners, household and industrial cleaners, concentrated detergent, and textile applications. 50% actives. Acceptable for alkaline, acidic, and neutral pH formulations. view less | Request Sample |
| Flexisurf™ EHS-40 | Innovative Chemical Technologies, Inc. | Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, h...view more Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, hard surface cleaning, concentrated liquid, low foaming detergent, carpet care and maintenance, industrial cleaning, clean-in-place detergent, dry cleaning and car wash applicaitons. . view less | Request Sample |
| Flexisurf™ LDP | Innovative Chemical Technologies, Inc. | Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This ...view more Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This product has a pH of 7.0 +/- 1.0 in a 10% aqueous solution and a boiling point of 100 degrees Celsius. view less | Request Sample |
| Flexiwet™ NF | Innovative Chemical Technologies, Inc. | Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiw...view more Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiwet™ NF is used in floor polish and stipper, carpeet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less | Request Sample |
| Flexiwet™ NF-80 | Innovative Chemical Technologies, Inc. | Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...view more Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less | Request Sample |
| Flexiwet™ RFS-20A | Innovative Chemical Technologies, Inc. | Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 ...view more Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 and 8.0 and is soluble in water. Its boiling point is approximately 100 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8000 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...view more Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8020DB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...view more Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. view less | Request Sample |
| Thetawet™ FS-8020EB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...view more Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. view less | Request Sample |
| Thetawet™ FS-8050 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...view more Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8100 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...view more Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8150 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...view more Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. view less | Request Sample |
| Thetawet™ FS-8200 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...view more Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8250 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...view more Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. view less | Request Sample |
