| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| Flexisperse™ 133N | Innovative Chemical Technologies, Inc. | Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...view more Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Flexisperse™ 134NH | Innovative Chemical Technologies, Inc. | Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...view more Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. view less | Request Sample |
| Flexisperse™ 225 | Innovative Chemical Technologies, Inc. | Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities. | Request Sample |
| Flexisperse™ CA-47 | Innovative Chemical Technologies, Inc. | Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- ...view more Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- 1.0. It has a boiling point of 100 degrees Celsius and contains 46-48% solids. view less | Request Sample |
| Flexisurf™ EHDP | Innovative Chemical Technologies, Inc. | Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent,...view more Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent, and emulsifying agent. Uses include hard surface cleaners, household and industrial cleaners, concentrated detergent, and textile applications. 50% actives. Acceptable for alkaline, acidic, and neutral pH formulations. view less | Request Sample |
| Flexisurf™ EHS-40 | Innovative Chemical Technologies, Inc. | Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, h...view more Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, hard surface cleaning, concentrated liquid, low foaming detergent, carpet care and maintenance, industrial cleaning, clean-in-place detergent, dry cleaning and car wash applicaitons. . view less | Request Sample |
| Flexisurf™ LDP | Innovative Chemical Technologies, Inc. | Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This ...view more Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This product has a pH of 7.0 +/- 1.0 in a 10% aqueous solution and a boiling point of 100 degrees Celsius. view less | Request Sample |
| Flexiwet™ NF | Innovative Chemical Technologies, Inc. | Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiw...view more Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiwet™ NF is used in floor polish and stipper, carpeet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less | Request Sample |
| Flexiwet™ NF-80 | Innovative Chemical Technologies, Inc. | Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...view more Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. view less | Request Sample |
| Flexiwet™ RFS-20A | Innovative Chemical Technologies, Inc. | Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 ...view more Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 and 8.0 and is soluble in water. Its boiling point is approximately 100 degrees Celsius. view less | Request Sample |
| Hycat™ 2000S | Dimension Technology Chemical Systems, Inc. | Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...view more Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. view less | |
| Hycat™ 3000S | Dimension Technology Chemical Systems, Inc. | Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...view more Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ 3000S has additional cure-system modifiers that improves the solubility characteristics in difficult epoxy-anhydride formulas resulting in uniform cures. view less | |
| Hycat™ AC-4 | Dimension Technology Chemical Systems, Inc. | Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeri...view more Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeric, dimeric or polymeric functional groups and will perform very well in the presence of a number of popular additives and toughening agents. It is recommended for use in epoxy/anhydride formulations. view less | |
| Hycat™ AO-4 | Dimension Technology Chemical Systems, Inc. | Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds ...view more Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds with monomeric, dimeric or poly functional groups, the degree of cross-linking and therefore the mechanical properties of the resulting product can be advantageously modified. It is recommended for use in epoxy/anhydride formulations. view less | |
| Hycat™ OA | Dimension Technology Chemical Systems, Inc. | Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These ca...view more Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ OA was developed to meet certain European regulatory requirements; especially products that may come in contact with humans, e.g., toys, packaging, laminates, etc. view less | |
| Hycat™ SM-3 | Dimension Technology Chemical Systems, Inc. | Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from...view more Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from a polymer reaction leading to the production of consistently uniform cures that are free from cracks and voids. It is recommended for use in epoxy/anhydride formulations. view less | |
| Thetawet™ FS-8000 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...view more Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8020DB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...view more Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. view less | Request Sample |
| Thetawet™ FS-8020EB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...view more Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. view less | Request Sample |
| Thetawet™ FS-8050 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...view more Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8100 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...view more Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8150 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...view more Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. view less | Request Sample |
| Thetawet™ FS-8200 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...view more Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. view less | Request Sample |
| Thetawet™ FS-8250 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...view more Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. view less | Request Sample |
