| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| CALGON® 322 | ICL Phosphate Specialty | CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates ...view more CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size ist rapidly achieved. This is beneficial in the production process of manufacturing paints. This product is best suitable as a dispersing agent for all aqueous building paints, especially emulsion paints consisting of usual resins. CALGON® 322 slows down sedimentation, stabilizes water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It also prevents coagulation and brown shadings of emulsion paints and deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achived. view less | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...view more CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...view more CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...view more CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. view less | Request Sample |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...view more Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. view less | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...view more Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. view less | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...view more Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. view less | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...view more Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. view less | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...view more Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. view less | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...view more Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. view less | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...view more Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. view less | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and h...view more Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...view more Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior c...view more Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products,...view more Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on. | |
| Celopro® ME10M P | Celotech Chemical Co., Ltd. | Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...view more Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. view less | |
| Celopro® ME20M P | Celotech Chemical Co., Ltd. | Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...view more Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. view less | |
| Celopro® ME30M P | Celotech Chemical Co., Ltd. | Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...view more Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. view less | |
| Celopro® ME40M P | Celotech Chemical Co., Ltd. | Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...view more Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. view less | |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| Celopro® ME50M P | Celotech Chemical Co., Ltd. | Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-base...view more Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, gypsum-based machine applied plasters, and decorative renders. view less | |
| Celopro® ME60M P | Celotech Chemical Co., Ltd. | Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, ...view more Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, and machine applied plasters. view less | |
| Celopro® ME6M P | Celotech Chemical Co., Ltd. | Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based j...view more Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based jointing compounds. view less | |
| Celopro® ME70M P | Celotech Chemical Co., Ltd. | Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and th...view more Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and thin layer plasters. view less | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offere...view more Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the Celopro® MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. view less | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered...view more Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. view less | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retent...view more Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product has been applied in tile adhesives, skim coats, thin layer plasters, gypsum based trowelling compounds, machine applied plasters, and decorative renders. view less | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ap...view more Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in gypsum and cement based plasters, joint fillers, machine-applied plasters, tile adhesives, gypsum-lime-plasters, thin layer plasters, and gypsum based plasters. view less | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® ...view more Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. view less | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modi...view more Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, plasters, skim coats, trowelling compounds etc. view less | |
| Celopro® MK400 P | Celotech Chemical Co., Ltd. | Celopro® MK400 P is a low viscosity type of Hydroxypropyl methylcellulose (HPMC). It is specially developed for application as a self-leveling compound. | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-mod...view more Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, cement-lime-plasters, skim coats, plasters, machine applied plasters, joint fillers and thermal insulation systems. view less | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ...view more Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in plaster, joint filler, tile adhesive, gypsum-lime-plasters, thin layer plasters etc. view less | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide wate...view more Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product can be applied in plasters, joint fillers, tile adhesives, gypsum-lime-plasters, and thin layer plasters. view less | |
| HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...view more HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...view more HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...view more HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...view more HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...view more HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...view more HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® FLASH-X® 150 | ICL Phosphate Specialty | HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels...view more HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. It is a low-viscosity liquid which is ideal for increasing production output. It exhibits excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. It is compatible with a variety of latices without causing film sensitivity or package stability problems. It can stabilize metal substrates when using the water-blasting method of surface restoration. It is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post-added to any coating system. The dosage level is 0.25-1% for flash rusting, 0.50-1.5% for in-can rusting, and 1.50-3% for water blasting. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® FLASH-X® 330 | ICL Phosphate Specialty | HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high g...view more HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss. It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating. HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture. It can also be easily and effectively post-added to any coating system. The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It i...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...view more HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® XTAIN® L-44 | ICL Phosphate Specialty | HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace...view more HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace zinc oxide. It is easy to post-add to a coating (1:1 with water). It eliminates the need for zinc oxide without sacrificing performance and provides improved package stability. The dosage level of HALOX® XTAIN® L-44 is 1-3% TFW. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® XTAIN® L-47 | ICL Phosphate Specialty | HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane disp...view more HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, Merbau, and oak. It offers superior performance without the need for Zn2+ cations thus conforming to European ecolabel requirements. HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44. Recommended dosage level is 1-3% based on total formula weight. view less | Request Sample |
| HALOX® Z-Plex 111 | ICL Phosphate Specialty | HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coati...view more HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coating systems. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyds, and water-based epoxies, polyurethanes, and polyurethane dispersions. HALOX® Z-PLEX 111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...view more HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...view more HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Zinc Phosphate | ICL Phosphate Specialty | HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically id...view more HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. It exhibits a narrow particle size distribution. It has a high degree of versatility. HALOX® Zinc Phosphate is recommended for most high-performance resin systems such as vinyl, chlorinated rubbers, and epoxies. It is also used in high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. It is also recommended for thin-film applications (1 mil or 25 microns). It is compliant with ASTM D6280-98 specification for zinc phosphate pigment type I. The dosage level is 5-15% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| LOPON® 800 | ICL Phosphate Specialty | LOPON® 800 is a dispersing agent for emulsion paints, varnishes, plasters, silicate emulsion paints and adhesives. This clear, yellowish liquid is a polyacrylate, sodium salt. It is ideally adjusted to polyphosphates like CALGON® N for obtaining washing a...view more LOPON® 800 is a dispersing agent for emulsion paints, varnishes, plasters, silicate emulsion paints and adhesives. This clear, yellowish liquid is a polyacrylate, sodium salt. It is ideally adjusted to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. It also offers good storage stability, high gloss, and is stable with glycol. view less | Request Sample |
| LOPON® 810 | ICL Phosphate Specialty | LOPON® 810 is a dispersing agent for water based emulsion paints and plasters, varnishes and silicate emulsion systems. The product is based on a sodiumpolyacrylate in aqueous solution. The residual monomer content is below 1%. The dispersing properties a...view more LOPON® 810 is a dispersing agent for water based emulsion paints and plasters, varnishes and silicate emulsion systems. The product is based on a sodiumpolyacrylate in aqueous solution. The residual monomer content is below 1%. The dispersing properties are very effective with inorganic pigments e.g. various types of titanium dioxide, calcium carbonate and quartz. With LOPON® 810 an excellent deflocculation results, combined with a high solid content of the end product. LOPON ®810 has a high alkaline stability and is also suitable for water glass based systems. view less | Request Sample |
| LOPON® 826 | ICL Phosphate Specialty | LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems....view more LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems. The application within emulsion silicate paints improves the rheological properties and the long time storage stability. The product is strongly alkaline and reacts with acids exothermically. view less | Request Sample |
| LOPON® 827 | ICL Phosphate Specialty | LOPON® 827 is a stabilizer for water glass systems. This yellowish liquid is a derivative of amine. This product is used as an additive in silicate paints, and it improves viscosity stability in storage, improves adding pigments and fillers. It also used ...view more LOPON® 827 is a stabilizer for water glass systems. This yellowish liquid is a derivative of amine. This product is used as an additive in silicate paints, and it improves viscosity stability in storage, improves adding pigments and fillers. It also used for the prevention of thickening during storage and improves the application. view less | Request Sample |
| LOPON® 828 | ICL Phosphate Specialty | LOPON® 828 is a highly effective stabilizer for emulsion silicate paints which prevents silicate groups in water glass from building up a polymeric network during storage. The viscosity of the paint levels off quickly and remains stable over a long period...view more LOPON® 828 is a highly effective stabilizer for emulsion silicate paints which prevents silicate groups in water glass from building up a polymeric network during storage. The viscosity of the paint levels off quickly and remains stable over a long period of time. LOPON® 828 is particularly low in VOC and SVOC, which makes it attractive for decorative wall paints for indoor living spaces. view less | Request Sample |
| LOPON® 888 | ICL Phosphate Specialty | LOPON® 888 is a dispersing agent for emulsion paints and plasters. This clear, yellow to light brown liquid is a polyacrylate, ammonium salt. It offers a high dispersing effect, as well as good storage stability of emulsion paints and plasters. | Request Sample |
| LOPON® 890 | ICL Phosphate Specialty | LOPON® 890 is a dispersing agent for emulsion paints, varnishes, plasters, silicate emulsion paints and adhesives. This clear, yellowish liquid is a polyacrylate, sodium salt. It is easily adjusted to polyphosphates like CALGON® N for obtaining washing an...view more LOPON® 890 is a dispersing agent for emulsion paints, varnishes, plasters, silicate emulsion paints and adhesives. This clear, yellowish liquid is a polyacrylate, sodium salt. It is easily adjusted to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. It also offers good storage stability, is stable with glycol, and high gloss advantages. view less | Request Sample |
| LOPON® 891 | ICL Phosphate Specialty | LOPON® 891 is a dispersing agent for emulsion powder paints and plasters. This white, hygroscopic granulate provides excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It stabilizes the viscosity of the final products...view more LOPON® 891 is a dispersing agent for emulsion powder paints and plasters. This white, hygroscopic granulate provides excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It stabilizes the viscosity of the final products even at longer storage, and prevents agglomerates. view less | Request Sample |
| LOPON® 892 | ICL Phosphate Specialty | LOPON® 892 is a dispersing agent for emulsion powder paints and plasters. This yellowish, hygroscopic powder is a polyacrylate, sodium salt. It offers excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It also prevent...view more LOPON® 892 is a dispersing agent for emulsion powder paints and plasters. This yellowish, hygroscopic powder is a polyacrylate, sodium salt. It offers excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It also prevents agglomerates and can be combined with other dispersing additives like CALGON® N. view less | Request Sample |
| LOPON® 893 | ICL Phosphate Specialty | LOPON® 892 is a dispersing agent for emulsion powder paints and plasters. This white, hygroscopic granulate provides excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It stabilizes the viscosity of the final products...view more LOPON® 892 is a dispersing agent for emulsion powder paints and plasters. This white, hygroscopic granulate provides excellent dispersion of pigments and fillers in emulsion paints and resin-based plaster. It stabilizes the viscosity of the final products even at longer storage, and prevents agglomerates. view less | Request Sample |
| LOPON® 895 | ICL Phosphate Specialty | LOPON® 895 is a dispersing agent for emulsion paints, varnishes, and emulsion-silicate paints. This yellowish clear liquid is a polyacrylate, potassium salt. It is ideally adjusted to polyphosphates like CALGON® N for obtaining washing and scrubbing resis...view more LOPON® 895 is a dispersing agent for emulsion paints, varnishes, and emulsion-silicate paints. This yellowish clear liquid is a polyacrylate, potassium salt. It is ideally adjusted to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. This product offers good storage stability, high gloss, and it is stable with glycol. It also improves washing resistance. view less | Request Sample |
| LOPON® 990 | ICL Phosphate Specialty | LOPON® 990 is a dispersing agent for emulsion paints, plasters, silicate emulsion paints and adhesives. This clear, yellow-brownish liquid is a polyacrylate, lithium salt. It is used for nano-hybride emulsion based systems and prevents surface cracking in...view more LOPON® 990 is a dispersing agent for emulsion paints, plasters, silicate emulsion paints and adhesives. This clear, yellow-brownish liquid is a polyacrylate, lithium salt. It is used for nano-hybride emulsion based systems and prevents surface cracking in nano-hybride emulsion based systems. It is ideally adjusted to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. This product offers very good scrub resistance, very good storage stability, and the pure lithium product is suitable for all applications in which foreign ions like Na+, K+, NH4+ could interfere. view less | Request Sample |
| LOPON® DA 200 | ICL Phosphate Specialty | LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mi...view more LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 200 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 201 | ICL Phosphate Specialty | LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will ...view more LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 201 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 400 | ICL Phosphate Specialty | LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and...view more LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 400 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 401 | ICL Phosphate Specialty | LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence wi...view more LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 401 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DA 402 | ICL Phosphate Specialty | LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, a...view more LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 402 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. view less | Request Sample |
| LOPON® DV | ICL Phosphate Specialty | LOPON® DV is a corrosion inhibitor for emulsion paints, premium plasters and other aqueous building paints. For binding iron ions the recommended dosage is 5.0 – 7.5 mg LOPON® DV per mg iron. It is a disodium phosphate. | Request Sample |
| LOPON® E 100 | ICL Phosphate Specialty | LOPON® E 100 is a defoamer for glossy paints. It is a VOC-mineral-oil- and silicon-free product. | Request Sample |
| LOPON® E 13 | ICL Phosphate Specialty | LOPON® E 13 is a defoamer for water based emulsion paints with focus on architectural paints and plasters. The defoamer itself is based on vegetable oil and is free of mineral oil and silicone. LOPON® E13 contains an optimized emulsifier system, which all...view more LOPON® E 13 is a defoamer for water based emulsion paints with focus on architectural paints and plasters. The defoamer itself is based on vegetable oil and is free of mineral oil and silicone. LOPON® E13 contains an optimized emulsifier system, which allows a very fast and effective miscibility with the water based system. The compatibility with different types of emulsion allows a wide range of formulation possibilities. Concerning the safety aspects, LOPON® E 13 conforms to BfR XIV and FDA. view less | Request Sample |
| LOPON® E 71 | ICL Phosphate Specialty | LOPON® E 71 is an opaque, yellowish liquid. It is a VOC, silicone and mineral oil free defoamer. | Request Sample |
