| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| CALGON® 322 | ICL Phosphate Specialty | CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates ...view more CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size ist rapidly achieved. This is beneficial in the production process of manufacturing paints. This product is best suitable as a dispersing agent for all aqueous building paints, especially emulsion paints consisting of usual resins. CALGON® 322 slows down sedimentation, stabilizes water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It also prevents coagulation and brown shadings of emulsion paints and deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achived. view less | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...view more CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...view more CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...view more CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. view less | Request Sample |
| Diethylene Glycol Dibutyl Ether | Clariant - Coatings & Construction Chemicals | Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, ...view more Diethylene Glycol Dibutyl Ether is a clear, colorless liquid with a characteristic odor. The solvent features a low freezing point, high boiling point, and low viscosity. It is miscible in any ratio with solvents such as ethanol, acetone, benzene, ether, and chlorinated hydrocarbons. It has little to no solubility in water and high molecular weight aliphatic hydrocarbons. DEGDBE is an excellent solvent for a wide range of polar and non-polar substances. Diethylene glycol dibutyl ether is an inert, aprotic solvent. It has wide applicability in various types of cleaning formulations. Examples include grease, wax, and stain removers and special low-flammability non-aqueous cleaning systems for electronic equipment. DEGDBE is used as a solvent for several coatings applications. It is a good coalescing agent with coupling ability. It is also used as solvent for inkjet inks, in formulations of deletion fluids for positive printing plates, retouching agents for lithographic printing and in cleaning agents for removing inks from printing machines. view less | |
| Dipropylene Glycol Dimethyl Ether | Clariant - Coatings & Construction Chemicals | Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, ap...view more Dipropylene Glycol Dimethyl Ether (DPGDME) is a colorless liquid with a mild, pleasant odor. It is completely miscible with most common organic solvents. However, it has limited solubility in water. DPGDME has no hydroxyl functionality. It is an inert, aprotic solvent and can be used in proton sensitive systems. Dipropylene Glycol Dimethyl Ether is not listed as a Hazardous Air Pollutant, has low toxicity, and offers an alternative to solvents being phased out as a result of the Clean Air Act. Due to its chemical stability and the absence of reactive groups, DPGDME can also be used as an inert reaction medium, e. g. for reactions with alkali and alkaline-earth metals (Grignard reactions), polymerizations etc. Dipropylene Glycol Dimethyl Ether is used in solvent-based coatings and water-based polyurethane/ isocyanate coating systems. It is used as environmentally friendly substitute for NMP (N-methyl pyrrolidone) e.g as as coalescing agent in water based polyurethane dispersions. Dipropylene glycol dimethyl ether is also used as a solvent for wood and furniture coatings as well as a solvent for hardeners. view less | |
| Dispersogen® 145 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales coloran...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is a mixture of the mono‐ and diester of phosphoric acid based on long chain alkyl polyethylene glycols. Dispersogen® 145 is used as dispersing agent for point‐of‐sales colorants in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. view less | |
| Dispersogen® 1728 | Clariant - Coatings & Construction Chemicals | Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigme...view more Dispersogen® 1728 is an anionic dispersing agent for pigments and minerals. It is used for water based and solvent based pigment preparations, disperse dyes and printing inks. This product is suitable for inorganic pigments, carbon black and organic pigments. The advantages of Dispersogen® 1728 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. This slightly cloudy, viscous or pasty liquid is composed of an aqueous solution of a novolac derivative. view less | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...view more Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. view less | |
| Dispersogen® 3169 | Clariant - Coatings & Construction Chemicals | Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing...view more Dispersogen® 3169 is a anionic dispersing agent for pigments. This brownish, clear liquid is an aqueous solution of an anionic novolac derivative. Dispersogen® 3169 is used for water based and solvent based pigment preparations, disperse dyes and printing inks. It is suitable for inorganic pigments, carbon black and in particular for organic pigments. The advantages of Dispersing® Agent 3169 are high pigment concentration, low viscosity of the preparation, high stability of the preparation and low foaming. view less | |
| Dispersogen® 4387 | Clariant - Coatings & Construction Chemicals | Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable f...view more Dispersogen® 4387 is an anionic dispersing agent for pigments and minerals. It is used for water based, solvent based of water / solvent based pigment preparations, paper printing inks, textile printing pastes and coatings. Dispersogen® 4387 is suitable for inorganic pigments (metal oxids), carbon black and especially for organic pigments (polycylcic and phthalocyanine pigments) that are difficult to disperse. This brown, cloudy liquid is free of any additional biocide, and it is composed of a modified castor oil derivative. The advantages of Dispersogen® 4387 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® AN 100 | Clariant - Coatings & Construction Chemicals | Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humec...view more Dispersogen® AN 100 is a dispersing agent for universal colorants. It is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. This product functions as a wetting agent, dispersing agent, stabilizer, humectant, and compatibilizer. Dispersogen® AN 100 is suitable for both inorganic and organic pigments. An additional humectant is not necessary. view less | |
| Dispersogen® FA | Clariant - Coatings & Construction Chemicals | Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment pr...view more Dispersogen® FA is a nonionic surfactant used as a wetting and dispersing agent for waterborne pigment preparations and emulsifier for water-in-oil and oil-in-water emulsions in paints and coatings. Dispersogen® FA is recommended for inorganic pigment preparations and point of sale colorants. view less | |
| Dispersogen® FN | Clariant - Coatings & Construction Chemicals | Dispersogen® FN is a wetting and dispersing agent for waterborne pigment preparations. It is recommended for inorganic pigment preparations and point-of-sales colorants. | |
| Dispersogen® FSE | Clariant - Coatings & Construction Chemicals | Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE ...view more Dispersogen® FSE is a wetting agent for waterborne paints and dispersing agent for pigments in pigment dispersions. This product is particularly suitable for inorganic pigments such as iron oxide, chrome oxide and mixed oxide pigments. Dispersogen® FSE is often used for inorganic pigments in combination with fatty amines like Genamin® CC 100 or Genamin® TA 100. Dispersogen® FSE offers a balanced viscosity to minimize sedimentation and at the same time enables dosing, pumping and feeding. A slightly alkaline pH of 7.5 - 8.5, adjusted by alkali like caustic soda, reduces the viscosity. view less | |
| Dispersogen® LEC | Clariant - Coatings & Construction Chemicals | Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the th...view more Dispersogen® LEC is an amphoteric surfactant that functions as an emulsifier and dispersing agent. It is used as dispersing agent for inorganic pigments in combination with nonionic dispersing agents, e.g. Dispersogen® MT 200. This product improves the the stability of colorants and the compatibility with waterborne and solvent-born coatings. view less | |
| Dispersogen® LFH | Clariant - Coatings & Construction Chemicals | Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It...view more Dispersogen® LFH is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide. Dispersogen® LFH is an anionic AP-free dispersing agent and used for water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. view less | |
| Dispersogen® PCE | Clariant - Coatings & Construction Chemicals | Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chai...view more Dispersogen® PCE is a modified polycarboxylate used for dispersing inorganic pigments. This product is composed of carboxylic acid groups on the principle polymer chain and polyethylene glycol ether side chains. The anionic charges on the principle chain absorb onto the inorganic pigments and provide steric stabilization due to the polyethylene glycol ether side chains. This mechanism is sometimes superior to the electrostatic stabilization of polyacrylic acid salts or copolymers of acrylic acid and maleic acid resulting in higher dispersion stability. view less | |
| Dispersogen® PL 30 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 30 is an extremely efficient polymeric dispersing agent for waterborne in-plant tinters based on organic pigments. It is able to disperse very high pigment loads while still forming stable low viscous pigments pastes. | |
| Dispersogen® PL 40 | Clariant - Coatings & Construction Chemicals | Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, preven...view more Dispersogen® PL 40 is an anionic graft copolymer. This product is a polymeric dispersing agent for organic pigments and carbon blacks in aqueous pigment preparations. Dispersogen® PL 40 provides low dispersion viscosity of the pigment dispersion, prevents sedimentation or syneresis and demonstrates good compatibility with resins and binders in waterborne coatings and inks. view less | |
| Dispersogen® PSM | Clariant - Coatings & Construction Chemicals | Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is comb...view more Dispersogen® PSM is a rheology modifier for pigment pastes. By absorbing onto the pigment surface and forming a protective layer, inter-particle forces are shielded and the viscosity of the pigment preparation is decreased. When Dispersogen® PSM is combined with dispersing agents like Dispersogen® FA, Dispersogen® FSE or Dispersogen® ECS, formulators can reduce the viscosity of the pigment dispersion and increase the pigment concentration. view less | |
| Dispersogen® PTS | Clariant - Coatings & Construction Chemicals | Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as...view more Dispersogen® PTS is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. It is used for aqueous pigment dispersions, preparations, paints and coatings as a wetting and dispersing agent for pigments and as emulsifier for polymer dispersions. This product is preferably suitable for organic pigments and carbon blacks and allows the production of stable, free flowing pigment preparations with low VOC – content and low odor. view less | |
| Dispersogen® SNW | Clariant - Coatings & Construction Chemicals | Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phth...view more Dispersogen® SNW is a dispersing agent for paints and coatings. It also offers wetting properties, improves the compatibility of pigments with resins and solvents, and prevents rub out. This product improves the compatibility of organic pigments like Phthalocyanine pigments (blues and green), Quinacridone pigments (red and purple) and other polycyclic pigments. Also carbon blacks are dispersed and the tinting strength in improves. view less | |
| Dispersogen® UDN | Clariant - Coatings & Construction Chemicals | Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with hi...view more Dispersogen® UDN is a mixture of nonionic dispersing and wetting agents used in pigment preparations. This yellowish liquid is suitable for inorganic pigments, organic pigments, and carbon black to produce stable, free flowing pigment preparations with high solid contents. Dispersogen® UDN is used in emulsion paints to improve compatibility of pigments and minerals with polymers and binders and to enhance the tinting strength of organic pigments. view less | |
| Emulsogen® 4084 | Clariant - Coatings & Construction Chemicals | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| Emulsogen® EPA 073 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for pa...view more Emulsogen® EPA 073 is an anionic emulsifier, wetting and dispersing agent. This product is designed for use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. view less | |
| Emulsogen® EPA 1954 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled p...view more Emulsogen® EPA 1954 is an anionic surfactant for industrial applications. It is used as an emulsifier for emulsion polymerization to produce polymer dispersions. The use of Emulsogen® EPA 1954 allows the production of polymer dispersions with controlled particle size and low coagulation during the polymerization process. view less | |
| Emulsogen® EPN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 118 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene. | |
| Emulsogen® EPN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw s...view more Emulsogen® EPN 217 is a nonionic emulsifier for emulsion polymerization. It is used as emulsifier in emulsion polymerization of olefinic monomers to reduce the grit level during polymerization and to improve the dispersion properties such as freeze-thaw stability, electrolyte and sheer stability. view less | |
| Emulsogen® EPN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadien...view more Emulsogen® EPN 287 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylic and styrene / acrylic dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® EPN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadi...view more Emulsogen® EPN 407 is a nonionic emulsifier for emulsion polymerization. It is used in polymerization of vinyl acetate together with other vinyl esters, acrylates, vinyl chloride and ethylene, for acrylate and styrene / acrylate dispersions and for butadiene / styrene latex. view less | |
| Emulsogen® LA 083 | Clariant - Coatings & Construction Chemicals | Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® L...view more Emulsogen® LA 083 is an anionic emulsifier and dispersing agent. It is composed of alkyl polyethylene glycol ether sulphate with 8 mole ethylene oxide, ammonium salt. This product is readily biodegradable and free of additional preservatives. Emulsogen® LA 083 is used as an emulsifier for emulsion polymerization of vinyl acetate, acrylic acid esters, methacrylic acid esters, styrene and other monomers. This product is also used as a dispersing agent for pigments to produce low viscous, stable pigment dispersions. view less | |
| Emulsogen® LCN 070 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be ...view more Emulsogen® LCN 070 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 7 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 070 can be used for the following applications: as wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l; as wetting and dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,5 - 1,0 %; as emulsifier for O/W - emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 %; and as emulsifier for emulsion polymerization in recommended levels of 1 - 2 % based on monomers. view less | |
| Emulsogen® LCN 088 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as...view more Emulsogen® LCN 088 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 8 mole ethylene oxide. This product is readily biodegradable and contains no additional biocides. Emulsogen® LCN 088 is used as a wetting agent for industrial applications in aqueous solutions of 1 - 5 g/l and as a dispersing agent in paints and coatings for fillers and pigments in concentrations of 0,1 - 1,0 %. Emulsogen® LCN 088 is also used as an emulsifier for O/W -emulsions of oils, fats, silicon oils and polyolefin wax emulsions in concentrations of 5- 10 % and for emulsion polymerization in recommended levels of 1- 2 % based on monomers. view less | |
| Emulsogen® LCN 118 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte sta...view more Emulsogen® LCN 118 is a nonionic emulsifier for industrial applications. It is ready biodegradable and contains no additional biocides. This product is used as an emulsifier for emulsion polymerization to improve the shear, temperature and electrolyte stability of polymer dispersions. Emulsogen® LCN 118 is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 158 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is use...view more Emulsogen® LCN 158 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 15 mole ethylene oxide. This product is is readily biodegradable and contains no additional biocides. Emulsogen® LCN 158 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 217 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as ...view more Emulsogen® LCN 217 is a nonionic emulsifier for industrial applications. It is composed of alkyl polyethylene glycol ether with 21 mole ethylene oxide. This product is ready biodegradable and contains no additional biocides. Emulsogen® LCN 217 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. This product is also is used as a dispersing agent for emulsion paints to improve the scrub resistance. view less | |
| Emulsogen® LCN 287 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen®...view more Emulsogen® LCN 287 is a nonionic emulsifier for industrial applications. It is used as emulsifier for emulsion polymerization of vinyl acetate, styrene and acrylate homo- and copolymers together with anionic surfactants like Emulsogen® EPA 073. Emulsogen® LCN 287 improves the shear, temperature and electrolyte stability of polymer dispersions. It is used as a dispersing agent for inorganic and organic pigments in aqueous pigment preparations. Emulsogen® LCN 287 is used for aqueous paints and coatings as a dispersing agent and stabilizer to improve the compatibility of pigments with polymers. It prevents skinning of aqueous coatings e.g. in textile coaitngs with emulsion polymers. This product is also used as an emulsifier for aqueous emulsions of alkyd resins. view less | |
| Emulsogen® LCN 407 | Clariant - Coatings & Construction Chemicals | Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving ...view more Emulsogen® LCN 407 is a nonionic emulsifier for industrial applications. This clear liquid to white pasty product is ready biodegradable and containsno additional biocides. Emulsogen® LCN 407 is used as an emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. It is also used as a dispersing agent for emulsion paints to improve the scrub resistance. Emulsogen® LCN 407 can be diluted with water at room temperature without forming a strong gel phase. view less | |
| Emulsogen® PF 20 S | Clariant - Coatings & Construction Chemicals | Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentra...view more Emulsogen® PF 20 S is an emulsifier for emulsion polymerization. This yellowish brown liquid is composed of polyalkylene glycol ether sulfate, ammonium salt. Emulsogen® PF 20 S is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. It can be used in combination with other nonionic and anionic surfactants. Emulsogen® PF 20 S is used as an emulsifier in emulsion polymerization, particularly in the manufacture of acrylate and styrene / acrylate dispersions. view less | |
| Emulsogen® SF 8 | Clariant - Coatings & Construction Chemicals | Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can al...view more Emulsogen® SF 8 is an anionic emulsifier and wetting agent. This cloudy liquid is composed of sodium di(2-ethylhexyl) sulfosuccinate in water. It can be used as a wetting agent for emulsion polymers, e.g. SBLatex for carpet coating. Emulsogen® SF 8 can also be used as a cake dewatering aide and as a wetting agent for aqueous, VOC-free paints and coatings. view less | |
| Emulsogen® TS 160 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce st...view more Emulsogen® TS 160 is a nonionic wetting and dispersing agent. It has a HLB value of about 13 and is used for aqueous pigment dispersions, preparations, paints and coatings. Emulsogen® TS 160 is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents and with low viscosities. Emulsogen® TS 160 improves the compatibility of pigments and minerals with polymers and binders. It also improves the shelf life and stability of emulsion paints. This product is free of any additional biocide. view less | |
| Emulsogen® TS 200 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigment...view more Emulsogen® TS 200 is a nonionic dispersing agent and emulsifier. It is is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 200 improves the compatibility of pigments and minerals with polymers and binders. It also improves shelf life and stability of emulsion paints. view less | |
| Emulsogen® TS 600 | Clariant - Coatings & Construction Chemicals | Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, ...view more Emulsogen® TS 600 is a nonionic dispersing and wetting agent for organic pigments in dispersions, preparations and coatings. This yellowish wax is free of any additional biocide, and it is suitable for organic pigments and carbon black to produce stable, free flowing pigment preparations with high solid contents. Emulsogen® TS 600 improves the compatibility of pigments and minerals with polymers and binders. It prevents skinning of emulsion polymers in paints and improves the shelf life and stability of emulsion paints. view less | |
| Genamin® BTMS | Clariant - Coatings & Construction Chemicals | Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening e...view more Genamin® BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin® BTMS offers a superb softening effect for thick and hard to manage hair. It is soluble in aqueous systems, compatible with cationic and amphoteric surfactants, and has excellent stability over wide pH range. view less | |
| Genamin® C 050 | Clariant - Coatings & Construction Chemicals | Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin gr...view more Genamin® C 050 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 5 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® C 100 | Clariant - Coatings & Construction Chemicals | Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grad...view more Genamin® C 100 is a surfactant for the chemical-technological industry. This yellowish to brownish clear liquid is a coconut fatty amine ethoxylate with 10 mol EO. The grade is composed of saturated C8-C18 fatty amines, predominantly C12-C14. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 020 Special | Clariant - Coatings & Construction Chemicals | Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic...view more Genamin® O 020 Special is a surfactant for the chemical industry. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genamin® O 200 | Clariant - Coatings & Construction Chemicals | Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic...view more Genamin® O 200 is a surfactant for the chemical-technological industry. This product is a yellowish to brownish clear liquid. The Oleylamine (O) grade is predominantly unsaturated C18 fatty amines. Genamin grades can be combined with all types at nonionic and cationic surfactants. The compatibility with anionic products must be checked for each case. The Genamin grades are resistant to most chemicals at typical concentrations used. They are insensitive to water hardness. Their specific surface active properties make them valuable bases and additives for the chemical technical industry. They can be used to manufacture textile auxiliaries (e.g. products for dyeing) mineral oil additives, crop protection products and pesticides, raw materials for cosmetics and adhesives. view less | |
| Genapol® ED 3060 | Clariant - Coatings & Construction Chemicals | Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of orga...view more Genapol® ED 3060 is a low-foaming wetting and dispersing agent for aqueous paints and coatings. This yellowish liquid improves the compatibility of pigments and minerals with polymers and binders in aqueous coatings and improves the color strength of organic pigments like phthalocyanine blue or red and yellow azo pigments. view less | |
| Genapol® PF 20 | Clariant - Coatings & Construction Chemicals | Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product...view more Genapol® PF 20 is a low foaming, nonionic surfactant and defoamer for use in detergents and cleaning agents. It is also used as a low foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. This product is a slightly cloudy, colorless liquid that is composed of block copolymer of propylene oxide and ethylene oxide, containing 20% w/w ethylene oxide. Genapol® PF 20 has good wetting and dispersing action coupled with low foaming tendency. Within the Genapol® PF series, the products with a lower degree of ethoxylation have a better foam-suppressing effect than the products with a higher degree of ethoxylation. Typical applications include rinsing aids, detergents for dishwashers and bottle-rinsing machines and industrial cleaning formulations. view less | |
| Genapol® PF 40 | Clariant - Coatings & Construction Chemicals | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...view more Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | |
| Genapol® X 050 | Clariant - Coatings & Construction Chemicals | Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wett...view more Genapol® X 050 is a nonionic emulsifier for the chemical industry. This colourless, clear liquid is compatible with anionic, cationic and other nonionic surfactants and resistant against strong alkaline and acid solutions. Genapol® X 050 is used as a wetting agent and emulsifier e.g. in detergents, industrial & institutional cleaners or in wax and silicon emulsions. view less | |
| Genapol® X 090 | Clariant - Coatings & Construction Chemicals | Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a w...view more Genapol® X 090 is a nonionic emulsifier for the chemical industry. This colorless, turbid liquid is compatible with anionic, cationic and other nonionic surfactants and is resistant against strong alkaline and acid solutions. Genapol® X 090 is used as a wetting agent, emulsifier and dispersing agent e.g. in detergents, industrial & institutional cleaners, in emulsion polymerization or in wax and silicon emulsions. view less | |
| Genapol® X 100 | Clariant - Coatings & Construction Chemicals | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...view more Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. view less | |
| Genapol® X 1003 | Clariant - Coatings & Construction Chemicals | Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electroly...view more Genapol® X 1003 is a nonionic emulsifier for the chemical industry. It is composed of isotridecyl polyethylene glycol ether with 100 mole ethylene oxide. Genapol® X 1003 can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1003 is added to the emulsion either before, during or after the polymerization process. This product can be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 1005 | Clariant - Coatings & Construction Chemicals | Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, du...view more Genapol® X 1005 is a nonionic emulsifier for the chemical industry. It can be used in emulsion polymerization to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. Genapol® X 1005 is added to the emulsion either before, during or after the polymerization process. This product can also be used as an emulsifier for bitumen emulsions. view less | |
| Genapol® X 150 | Clariant - Coatings & Construction Chemicals | Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate d...view more Genapol® X 150 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 15 mole ethylene oxide. Genapol® X 150 is used in emulsion polymerization of vinyl acetate, acrylate and styrene / acrylate dispersions to reduce coagulation and to improve electrolyte resistance and freeze/thaw stability. This product is used either during or after polymerization. view less | |
| Genapol® X 307 | Clariant - Coatings & Construction Chemicals | Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styren...view more Genapol® X 307 is a nonionic emulsifier for emulsion polymerization. It is composed of isotridecyl polyethylene glycol ether with 30 mole ethylene oxide. The use of Genapol® X 307 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. view less | |
| Genapol® X 407 | Clariant - Coatings & Construction Chemicals | Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw st...view more Genapol® X 407 is a nonionic emulsifier for emulsion polymerization. The use of Genapol® X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte resistance and freeze/thaw stability. This product is added to the emulsion either before, during or after the polymerization process. This product is also available as Genapol® X 407 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 86%. view less | |
| HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...view more HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...view more HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...view more HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...view more HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...view more HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...view more HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® FLASH-X® 150 | ICL Phosphate Specialty | HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels...view more HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. It is a low-viscosity liquid which is ideal for increasing production output. It exhibits excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. It is compatible with a variety of latices without causing film sensitivity or package stability problems. It can stabilize metal substrates when using the water-blasting method of surface restoration. It is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post-added to any coating system. The dosage level is 0.25-1% for flash rusting, 0.50-1.5% for in-can rusting, and 1.50-3% for water blasting. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® FLASH-X® 330 | ICL Phosphate Specialty | HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high g...view more HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss. It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating. HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture. It can also be easily and effectively post-added to any coating system. The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It i...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...view more HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® XTAIN® L-44 | ICL Phosphate Specialty | HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace...view more HALOX® XTAIN® L-44 by ICL is a very effective liquid tannin stain-blocking additive. It is barium & antimony-free ammonium stabilized zirconium salt. It provides high performance and good compatibility with most water-based coating systems. It can replace zinc oxide. It is easy to post-add to a coating (1:1 with water). It eliminates the need for zinc oxide without sacrificing performance and provides improved package stability. The dosage level of HALOX® XTAIN® L-44 is 1-3% TFW. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® XTAIN® L-47 | ICL Phosphate Specialty | HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane disp...view more HALOX® XTAIN® L-47 by ICL is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid tannin stain inhibiting additive. It is designed to stop tannin bleed in various waterborne coating systems such as acrylic emulsions and polyurethane dispersions (PUD) applied to a variety of wood species for example, redwood, Merbau, and oak. It offers superior performance without the need for Zn2+ cations thus conforming to European ecolabel requirements. HALOX® XTAIN® L-47 provides similar efficiency as its predecessor HALOX® XTAIN® L-44. Recommended dosage level is 1-3% based on total formula weight. view less | Request Sample |
| HALOX® Z-Plex 111 | ICL Phosphate Specialty | HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coati...view more HALOX® Z-PLEX 111 by ICL is a highly versatile and economical corrosion-inhibiting pigment. It is a zinc phosphate complex designed to compete head-to-head with standard zinc phosphate pigments. It is a white, non-refractive grade used in protective coating systems. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyds, and water-based epoxies, polyurethanes, and polyurethane dispersions. HALOX® Z-PLEX 111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-Plex 250 | ICL Phosphate Specialty | HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It ...view more HALOX® Z-PLEX 250 by ICL is a white, non-refractive, corrosion-inhibiting pigment. It is an alternative to lead & chrome inorganic corrosion inhibitors. It is type I, zinc phosphate di-hydrate. It is designed for powder coatings & protective coatings. It shows a high degree of versatility due to its narrow particle size distribution. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 250 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended dosage level is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced perfor...view more HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Zinc Phosphate | ICL Phosphate Specialty | HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically id...view more HALOX® Zinc Phosphate by ICL is a universal lead-free and chromium-free inorganic corrosion inhibitor. It is designed for water-based- and solvent-based coatings. It is a white, non-refractive grade used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. It exhibits a narrow particle size distribution. It has a high degree of versatility. HALOX® Zinc Phosphate is recommended for most high-performance resin systems such as vinyl, chlorinated rubbers, and epoxies. It is also used in high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. It is also recommended for thin-film applications (1 mil or 25 microns). It is compliant with ASTM D6280-98 specification for zinc phosphate pigment type I. The dosage level is 5-15% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
