| (1) NATCATalyst 140 | NiCHEM CORP. | NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol. | |
| (2) NATCATalyst 170 | NiCHEM CORP. | NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...view more NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. view less | |
| (3) FASTCATaylst B25 | NiCHEM CORP. | FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...view more FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. view less | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| (5) NATCATalyst 229B | NiCHEM CORP. | NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...view more NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. view less | |
| (6) NATCATalyst 229W | NiCHEM CORP. | NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...view more NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. view less | |
| BARAGEL® 3000 | Elementis | BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on me...view more BARAGEL® 3000 rheological additive is a self activating organoclay grease gellant for thickening medium- to high-viscosity-index mineral oils, synthetic oils and other organic fluids. It is easy to disperse and suitable for lubricating greases based on medium- to high- VI paraffinic oils, synthetic oils and other organic fluids. Many of these greases are used in mining, farming, metal refining and military applications. view less | Request Sample |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | Request Sample |
| BENGEL® 958 | Elementis | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...view more BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. view less | Request Sample |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | Request Sample |
| BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | Request Sample |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | Request Sample |
| BENTONE® 52 | Elementis | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...view more BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. view less | Request Sample |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...view more BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. view less | Request Sample |
| BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | Request Sample |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...view more BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. view less | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | Request Sample |
| BENTONE® DH | Elementis | BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrifici...view more BENTONE® DH is a solvent-free, waterborne hectorite clay based powder for low to zero-VOC decorative coatings which provides syneresis control with improved flow. This Hectorite Clay is a cost effective replacement to HEC and Attapulgite without sacrificing performance . It is also crystalline silica-free; therefore, there are no Prop 65 reporting requirements. It is also compatible with a wide variety of rheological modifiers. Starting point formulations are available upon request. view less | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | Request Sample |
| BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | Request Sample |
| BENTONE® HC | Elementis | BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less | Request Sample |
| BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | Request Sample |
| BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | Request Sample |
| BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | Request Sample |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | Request Sample |
| BENTONE® P270 CO | Elementis | BENTONE® P270 CO is a pre-activated hectorite based organoclay in castor oil. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE® P380 MS | Elementis | BENTONE® P380 MS is a pre-activated hectorite based organoclay in odourless mineral spirits. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...view more BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. view less | Request Sample |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...view more BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. view less | Request Sample |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...view more BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. view less | Request Sample |
| BENTONE® WBS | Elementis | BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, im...view more BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, improves workability, and is compatible with other thickeners. This product is recommended for waterborne decorative latex paints and similar systems, gypsum plasters, and buiding materials such as mortars and renderings based on lime, cement, and gypsum. view less | Request Sample |
| CALGON® 322 | ICL Phosphate Specialty | CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates ...view more CALGON® 322 is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This white, hygroscopic powder improves the storage stability when applied in combination with Polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size ist rapidly achieved. This is beneficial in the production process of manufacturing paints. This product is best suitable as a dispersing agent for all aqueous building paints, especially emulsion paints consisting of usual resins. CALGON® 322 slows down sedimentation, stabilizes water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It also prevents coagulation and brown shadings of emulsion paints and deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achived. view less | Request Sample |
| CALGON® 322 New | ICL Phosphate Specialty | CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 8...view more CALGON® 322 New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly acidic sodium polyphosphate of long chain length. This product improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size is rapidly achieved and it is best suited as a dispersing agent for waterborne paints, especially emulsion paints. It also slows down sedimentation reduces water hardness and offers a good binding capacity with regard to calcium- and heavy metal ions. This product deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N | ICL Phosphate Specialty | CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON®...view more CALGON® N is a dispersing agent for emulsion paints, plasters and adhesives. This white powder is a slightly alkaline sodium polyphosphate of medium chain length. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890, and due to its high dispersing effectivity, optimal particle size is rapidly achieved. This product is suitable as a dispersing agent for waterborne paints, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. view less | Request Sample |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...view more CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. view less | Request Sample |
| DAPRO® AP 7010 | Elementis | DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less | Request Sample |
| DAPRO® AP 7010S | Elementis | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 109 | Elementis | DAPRO® DF 109 imparts good foam control in paints and coatings. DAPRO® DF 109 provides rapid bubble break at low concentrations. | Request Sample |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...view more DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. view less | Request Sample |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...view more DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. view less | Request Sample |
| DAPRO® DF 40 | Elementis | DAPRO® DF 40 has excellent defoaming properties providing rapid bubble break and excellent persistence. It shows excellent compatibility and is suitable to use in the let down stage of sensitive coatings systems where optical properties are very important...view more DAPRO® DF 40 has excellent defoaming properties providing rapid bubble break and excellent persistence. It shows excellent compatibility and is suitable to use in the let down stage of sensitive coatings systems where optical properties are very important (e.g. gloss, transparency). view less | Request Sample |
| DAPRO® DF 404 | Elementis | DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hy...view more DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hybrid systems. view less | Request Sample |
| DAPRO® DF 451 | Elementis | DAPRO® DF 451 is especially efficient in destabilizing both macro and micro foam in water- based coatings and inks. The defoamer exhibits very good persistence and has minimal impact on gloss development and color acceptance and thus is an excellent defoa...view more DAPRO® DF 451 is especially efficient in destabilizing both macro and micro foam in water- based coatings and inks. The defoamer exhibits very good persistence and has minimal impact on gloss development and color acceptance and thus is an excellent defoamer for eliminating application foam. view less | Request Sample |
| DAPRO® DF 47 | Elementis | DAPRO® DF 47 is a general purpose let down defoamer for decorative coatings. It can be used in all water based paints and decorative coatings and is suitable for a broad range of latex systems. | Request Sample |
| DAPRO® DF 51 | Elementis | DAPRO® DF 51 is mineral oil free and has excellent defoaming properties, particularly in flexo-inks and paper coatings. DAPRO® DF 51 is particularly suitable in systems where mineral oils are unacceptable in the chemical waste water. | Request Sample |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | Request Sample |
| DAPRO® DF 537 | Elementis | DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the sys...view more DAPRO® DF 537 is effective across a broad range of water based formulations and latex systems. The product has an excellent combination of foam control and compatibility. This allows for easy incorporation while maintaining persistent defoaming of the system over the long term. DAPRO® DF 537 is used to prevent and minimize foam in architectural paints, water based printing inks, and latex adhesive and construction systems. view less | Request Sample |
| Dapro® DF 615 | Elementis | Dapro® DF 615 is a stable and effective silicone emulsion foam control agent. Easily diluted in water, Dapro® DF 615 is for use in all aqueous media. It is certified kosher and pareve. | Request Sample |
| DAPRO® DF 661 | Elementis | DAPRO® DF 661 is especially useful in water-based industrial coatings particularly amino baking paint systems and has little to no impact on gloss characteristics. DAPRO® DF 661 also exhibits excellent phase stability in drums. | Request Sample |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less | Request Sample |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 7007 | Elementis | DAPRO® DF 7007 is a chelating catalyst to replace cobalt based dryers in waterborne coatings. | Request Sample |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | Request Sample |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | Request Sample |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | Request Sample |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | Request Sample |
| DAPRO® DF 80 | Elementis | DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emu...view more DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emulsion systems. DAPRO® DF 80 exhibits excellent clean-up properties. view less | Request Sample |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...view more DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. view less | Request Sample |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | Request Sample |
| DAPRO® DF 99 | Elementis | DAPRO DF 99 is water dispersible defoamer which is excellent in aqueous media. DAPRO® DF 99 is particularly effective in flexo, gravure and screen printing inks, adhesives and water based industrial coatings as it exhibits®fast knockdown even at low use l...view more DAPRO DF 99 is water dispersible defoamer which is excellent in aqueous media. DAPRO® DF 99 is particularly effective in flexo, gravure and screen printing inks, adhesives and water based industrial coatings as it exhibits®fast knockdown even at low use levels. DAPRO® DF 99 is excellent in suppressing foam in effluent systems. view less | Request Sample |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | Request Sample |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | Request Sample |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | Request Sample |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | Request Sample |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...view more DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. view less | Request Sample |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | Request Sample |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...view more DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. view less | Request Sample |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...view more DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. view less | Request Sample |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | Request Sample |
| HALOX® 350 | ICL Phosphate Specialty | HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odo...view more HALOX® 350 by ICL is a zero-VOC, highly effective 97-100% solids organic corrosion inhibitor. It is designed for water-based formulations in order to provide flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is a low-odor, nitrite-free, di-carboxylic acid-based grade. It is very effective at low loading levels and offers temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors. It is compatible with water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It is also used in clear coats, thin films, and coil coatings. The recommended dosage level is 0.2-0.8% based on total solids formulation. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...view more HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 515 LFG | ICL Phosphate Specialty | HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effect...view more HALOX® 515 LFG by ICL is a low-freeze, liquid organic corrosion inhibitor based on amino-carboxylate salt. It is effective as a flash rust inhibitor on weld seams. It is recommended for high gloss (direct to metal) coating systems. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin-film applications (<2 mils). It is heavy metal- & nitrite-free grade and contains no chromates or phosphates. It offers improved adhesion at the scribe and good humidity resistance. HALOX® 515 LFG can easily and effectively be post-added or added in the letdown stage of any coating system. Recommended loading level is 1-3% based on total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phos...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. I...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in s...view more HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion perf...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| HALOX® 700 | ICL Phosphate Specialty | HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-...view more HALOX® 700 by ICL is a white, non-refractive, zinc & aluminum phosphate-based corrosion-inhibiting pigment for protective coatings. It is designed to provide coatings with early and long-term corrosion protection. It is recommended for solvent- and water-based epoxy and urethane coatings. It is suitable for alkyd and acrylic coatings. It can be used in combination with HALOX® 700. The dosage level of HALOX® 700 is 5-12% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd ...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...view more HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long o...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® FLASH-X® 150 | ICL Phosphate Specialty | HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels...view more HALOX® FLASH-X® 150 by ICL is a liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting in lined and unlined metal containers. It is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. It is a low-viscosity liquid which is ideal for increasing production output. It exhibits excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. It is compatible with a variety of latices without causing film sensitivity or package stability problems. It can stabilize metal substrates when using the water-blasting method of surface restoration. It is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post-added to any coating system. The dosage level is 0.25-1% for flash rusting, 0.50-1.5% for in-can rusting, and 1.50-3% for water blasting. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® FLASH-X® 330 | ICL Phosphate Specialty | HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high g...view more HALOX® FLASH-X® 330 by ICL is an effective, nitrite-free, low odor, liquid flash rust inhibitor. It is used in the manufacturing of water-based protective coatings for inhibition of in-can rusting for unlined metal containers. It is recommended for high gloss systems and does not detract from gloss. It is added to water jet-blasting solutions to provide temporary protection prior to applying the protective coating. HALOX® FLASH-X® 330 is easy to use and can be incorporated at any stage of coating manufacture. It can also be easily and effectively post-added to any coating system. The dosage level for flash-rusting application is 0.5-2% and for in-can rusting is 1.5-2.5%. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It i...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...view more HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. view less | Request Sample |
