| Castor Oil Pale Pressed | Welch, Holme & Clark Co., Inc. | Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for ...view more Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a specific gravity of 0.957 to 0.961 at 25°C, an iodine value of 83 to 88, and a hydroxyl value of 160 to 168. view less | |
| Castor Oil U.S.P. | Welch, Holme & Clark Co., Inc. | Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil i...view more Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil is used as a drying oil in the paints, inks, and varnishes. Castor oil is popular due to the fact that its plentiful chemical derivatives are a "renewable sources, bio-degradable and eco-friendly." Castor Oil U.S.P. has a specific gravity between the ranges of 0.957 to 0.961 at 25°C and a saponification value of 176 to 182. view less | |
| DOWSIL™ 100F Additive | Dow Performance Silicones | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| Edible Beef Tallow | Welch, Holme & Clark Co., Inc. | Edible Beef Tallow is obtained by heat rendering of tissues (trimmings and cuttings) from beef, where it is then refined, bleached, neutralized, and deodorized making it refined beef tallow. Animal Fats & Oil, including edible fats and oil, are for coatin...view more Edible Beef Tallow is obtained by heat rendering of tissues (trimmings and cuttings) from beef, where it is then refined, bleached, neutralized, and deodorized making it refined beef tallow. Animal Fats & Oil, including edible fats and oil, are for coatings, ink, paint, lubricant, and adhesive industries. Edible Beef Tallow has a specific gravity of 0.9 and a melting point greater than 40°C. view less | |
| Gallic Acid | Derbiotec | Gallic Acid is the given name to identify the 3,4,5 -trihydroxibenzoic acid, a carboxylic aromatic acid, obtained from the Peruvian Tara fruit (Caesalpinea spinosa kuntze molina ). It is rich in tannins. Gallic Acid is presented as powder or as acicular w...view more Gallic Acid is the given name to identify the 3,4,5 -trihydroxibenzoic acid, a carboxylic aromatic acid, obtained from the Peruvian Tara fruit (Caesalpinea spinosa kuntze molina ). It is rich in tannins. Gallic Acid is presented as powder or as acicular white or yellowish crystals, with a silky sheen. view less | |
| Industrial Castor Oil | Welch, Holme & Clark Co., Inc. | Industrial Castor Oil is the fixed oil attained from the seed of Ricinus Communis Linn with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for cas...view more Industrial Castor Oil is the fixed oil attained from the seed of Ricinus Communis Linn with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a saponification value of 176 to 184 and a viscosity of 6.3 to 8.9, with an acid value of 2.0 maximum. view less | |
| Propyl Gallate | Derbiotec | Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant...view more Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant. It can be used in the Food industry to avoid the oxidation of oils and fats. As an additive, it may be found in edible fats, oils, mayonnaise, fresh pork sausage, dried meat, shortening, baked goods, candy and dried milk. Also it is used in hair grooming products. view less | |
| Refined Peanut Oil N.F. | Welch, Holme & Clark Co., Inc. | Refined Peanut Oil N.F., overall oil resulting from the seed kernels of one or more of the cultivated assortments of Archis Hypogaea Linn, is a pale gold and slightly flavored with the richness of peanuts. In the U.S., the oil is extracted by cleaning the...view more Refined Peanut Oil N.F., overall oil resulting from the seed kernels of one or more of the cultivated assortments of Archis Hypogaea Linn, is a pale gold and slightly flavored with the richness of peanuts. In the U.S., the oil is extracted by cleaning the nuts and passing them through shellers or hullers to separate the kernels. The kernels, containing 48 to 56 percent of oil, are then “crushed, heated, and pressed hot in hydraulic presses”. Refined vegetable oils are for coatings, ink, paint, lubricant, and adhesive industries. Refined Peanut Oil N.F. has a specific gravity between the ranges of 0.912 to 0.920 at 25°C, a saponification value of 185 to 195, and a refractive index between the ranges of 1.462 to 1.464 at 40°C. view less | |
| Refined Sesame Oil N.F. | Welch, Holme & Clark Co., Inc. | Refined Sesame Oil N.F. is the refined fixed oil resulting from the seed of one or more of the cultivated assortments of Sesamum Lindicum Linn with a greenish yellow, bright and clear oily liquid and has a bland, almost odorless flavor and aroma. Asian se...view more Refined Sesame Oil N.F. is the refined fixed oil resulting from the seed of one or more of the cultivated assortments of Sesamum Lindicum Linn with a greenish yellow, bright and clear oily liquid and has a bland, almost odorless flavor and aroma. Asian sesame oil, from Japan and China, is made from roasted seeds and has an amber color and a bursting, rich flavor. Refined vegetable oils are for coatings, ink, paint, lubricant, and adhesive industries. Refined Sesame Oil N.F. has a specific gravity between the ranges of 0.916 to 0.921 at 25°C and a saponification value of 188 to 195. view less | |
| WHC Lard Oil | Welch, Holme & Clark Co., Inc. | WHC Lard Oil contains mainly of olein that is extracted from lard and used particularly as cutting oil, illuminant animal oil, or as a lubricant. Animal and vegetable fats (fat grease and oil) are used in lubricant, soap, coatings, paint, adhesives, ink, ...view more WHC Lard Oil contains mainly of olein that is extracted from lard and used particularly as cutting oil, illuminant animal oil, or as a lubricant. Animal and vegetable fats (fat grease and oil) are used in lubricant, soap, coatings, paint, adhesives, ink, and more. WHC Lard Oil has a saponification number of 190 to 200, a flash point of 430°F minimum, and a viscosity SUS of 190 to 210 (100F). view less |
