| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...view more Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. view less | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...view more Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...view more Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...view more Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...view more Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. view less | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...view more Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. view less | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...view more Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. view less | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...view more Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. view less | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Gallic Acid | Derbiotec | Gallic Acid is the given name to identify the 3,4,5 -trihydroxibenzoic acid, a carboxylic aromatic acid, obtained from the Peruvian Tara fruit (Caesalpinea spinosa kuntze molina ). It is rich in tannins. Gallic Acid is presented as powder or as acicular w...view more Gallic Acid is the given name to identify the 3,4,5 -trihydroxibenzoic acid, a carboxylic aromatic acid, obtained from the Peruvian Tara fruit (Caesalpinea spinosa kuntze molina ). It is rich in tannins. Gallic Acid is presented as powder or as acicular white or yellowish crystals, with a silky sheen. view less | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...view more Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. view less | Request Sample |
| Ottopol 1320 | Gellner Industrial, LLC | Ottopol 1320 is a medium hard, tough, all anionic acrylic emulsion with outstanding chemical, abrasion and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. | |
| Ottopol 1450 | Gellner Industrial, LLC | Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blen...view more Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blends. view less | |
| Ottopol 151 | Gellner Industrial, LLC | Ottopol 151 is an anionic acrylic emulsion. | |
| Ottopol 1960 | Gellner Industrial, LLC | Ottopol 1960 anionic acrylic emulsion is a high solids binder suitable for high performance sealants, patching compounds and contact adhesives as well as coating formulations. | |
| Ottopol 25-30 | Gellner Industrial, LLC | Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-grap...view more Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50 | Gellner Industrial, LLC | Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-g...view more Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 25-50E | Gellner Industrial, LLC | Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic ink...view more Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less | |
| Ottopol 300 | Gellner Industrial, LLC | Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acry...view more Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acrylic polymers. view less | |
| Ottopol 503 | Gellner Industrial, LLC | Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coat...view more Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coating. view less | |
| Ottopol 510-28 | Gellner Industrial, LLC | Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as ...view more Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hardness, and improved flow. It imparts superb weatherability and improved solubility. view less | |
| Ottopol 523 | Gellner Industrial, LLC | Ottopol 523 is an anionic hydroxyl functional acrylic emulsion. The functionality allows the polymer to cross-link with melamine or aziridine. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using...view more Ottopol 523 is an anionic hydroxyl functional acrylic emulsion. The functionality allows the polymer to cross-link with melamine or aziridine. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using aziridine will require a plasticizer or coalescent solvent to aid the film formation of the dried coating. Formulations using melamine and PTSA (Para-Toluene Sulfonic Acid) are stable for a minimum of thirty days. The starting formulation requires a web temperature of 180 degrees Fahrenheit to activate cross-linking of the resins. An increase in PTSA will lower the temperature required to activate cross-linking. Larger amounts of PTSA will increase the hardness of the dry film. There are no plasticizers or coalescent aids required for film formation when using a melamine resin with Ottopol 523. view less | |
| Ottopol G-35 | Gellner Industrial, LLC | Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and ...view more Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and shows a very low degree of thixotropy resulting in a superior printing quality. Ottopol G-35 has excellent high gloss as well as good pigment wetting. Optimum color development is achievable with a large variety of pigments. view less | |
| Ottopol K-23 | Gellner Industrial, LLC | Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion character...view more Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion characteristics provide higher solids and better gloss. Positive charge allows inks and coatings made with Ottopol K-23 to have exceptionally good adhesion to plastic films such as polyethylene, PVC, polyester, and polystyrene. view less | |
| Ottopol K-362 | Gellner Industrial, LLC | Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down...view more Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. Due to its positive charge, Ottopol K-362 allows inks and coatings to have excellent adhesion to plastic films such as mylar, PVC, and polystyrene, as well as to foil and other metallic surfaces. view less | |
| Ottopol K-633 | Gellner Industrial, LLC | Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear...view more Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin is impermeable to alkali without the use of cross-linking agents. The positive charge allows inks and coatings using Ottopol K-633 allows exceptionally good adhesion to plastic films. view less | |
| Ottopol K-65 | Gellner Industrial, LLC | Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...view more Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-65 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. view less | |
| Ottopol K-66 | Gellner Industrial, LLC | Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...view more Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-66 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. view less | |
| Ottopol K-672 | Gellner Industrial, LLC | Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyana...view more Ottopol K-672 is a hydroxyl functional cationic acrylic emulsion polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. The fastest and most resistant coating can be formulated with the combination of polyisocyanate and an epoxy silane. We recommend a maximum of 11.5% epoxy silane based on solids. Detergents and cleaners will not remove this film. Water resistance is excellent. The dried film will also resist staining. view less | |
| Ottopol KO | Gellner Industrial, LLC | Ottopol KO is a cationic styrene/acrylic emulsion. It blocks tannin oils, stains on drywall, water stains from concrete blocks, and fungal growth in damp or humid environments. It has excellent adhesion. | |
| Ottopol KX-101 | Gellner Industrial, LLC | Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing ha...view more Ottopol KX-101 is a translucent hydroxyl functional cationic acrylic emulsion polymer. It will cross-link at room temperature with polyisocyanates and epoxy silanes. This combination formulates the fastest and most resistant coating. The ambient curing happens very quickly, in 15 minutes the film will have excellent water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs acetone resistance and also resists staining. Detergents and cleaners will not remove this film. Ottopol KX-101 is still in the experimental stage. view less | |
| Ottopol M-30 | Gellner Industrial, LLC | Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordina...view more Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordinary compatibility with basic dyes and fluorescent pigments. Fluorescent inks made from this product show no pH swing, which causes stability problems in other vehicle systems. view less | |
| Ottopol M-49 | Gellner Industrial, LLC | Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA doe...view more Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA does not promote the tarnishing of metallic pigments. The product has been proven to provide good aging stability and compatibility with additives and other resin systems. view less | |
| Ottopol S-100 | Gellner Industrial, LLC | Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and ...view more Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin provides non-curling properties on paper. view less | |
| Ottopol S-30 | Gellner Industrial, LLC | Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gr...view more Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol S-50 | Gellner Industrial, LLC | Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gr...view more Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol S-75 | Gellner Industrial, LLC | Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gr...view more Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. view less | |
| Ottopol SF 49 | Gellner Industrial, LLC | Ottopol SF 49 is a self crosslinking acrylic emulsion that has outstanding water resistance and will not blush even after prolonged exposure to water. It can be formulated into a corrosion resistant primer or semi-gloss paint. | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| Ottopol SX-100 | Gellner Industrial, LLC | Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using...view more Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of this product provides a high gloss finish and non-curling properties on paper. view less | |
| Ottopol SX-30 | Gellner Industrial, LLC | Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. The resin provides non-curling properties on paper. view less | |
| Ottopol SX-50 | Gellner Industrial, LLC | Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-50's block and scuff resistance is improved over conventional vehicles. view less | |
| Ottopol SX-75 | Gellner Industrial, LLC | Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...view more Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-75's block and scuff resistance is improved over conventional vehicles. view less | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...view more ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. view less | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...view more ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. view less | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...view more ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. view less | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...view more ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. view less | Request Sample |
| Propyl Gallate | Derbiotec | Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant...view more Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant. It can be used in the Food industry to avoid the oxidation of oils and fats. As an additive, it may be found in edible fats, oils, mayonnaise, fresh pork sausage, dried meat, shortening, baked goods, candy and dried milk. Also it is used in hair grooming products. view less |
