| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...Vea Mas Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. Vea Menos | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...Vea Mas Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. Vea Menos | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...Vea Mas Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. Vea Menos | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 es una solución de polímero asociativo no iónico diseñado para aumentar la consistencia medida mediante viscosímetro Stormer y proporcionar un flujo y nivelación superiores en pinturas y revestimientos a base de agua. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...Vea Mas Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. Vea Menos | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...Vea Mas Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. Vea Menos | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...Vea Mas Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. Vea Menos | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...Vea Mas Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. Vea Menos | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...Vea Mas Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. Vea Menos | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...Vea Mas Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). Vea Menos | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...Vea Mas BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. Vea Menos | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...Vea Mas Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. Vea Menos | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...Vea Mas CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. Vea Menos | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 es la forma neutralizada (sal de potasio) de un éster de fosfato de alcohol alifático etoxilado. Está diseñado para impartir la mejora de aceptación de brillo y color en pinturas de látex a base de agua. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS tensioactivo es la forma neutralizada (sal sódica) de un éster de fosfato de alcohol alifático etoxilado. Está diseñado para impartir brillo y aceptación de color mejorados en pinturas al látex de base acuosa. Dependiendo de la especific...Vea Mas Dextrol™ OC-180HS tensioactivo es la forma neutralizada (sal sódica) de un éster de fosfato de alcohol alifático etoxilado. Está diseñado para impartir brillo y aceptación de color mejorados en pinturas al látex de base acuosa. Dependiendo de la especificación de la formulación, este producto también puede funcionar como un dispersante complementario para ayudar a reducir la floculación del pigmento. Además de usarse en pinturas al látex, Dextrol™ OC-180HS tensioactivo brinda beneficios en colorantes universales, para ayudar a dispersar y estabilizar los pigmentos, mejorando la aceptación de color de pinturas a base de agua. Vea Menos | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 es la forma de ácido libre de un éster de fosfato de de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en a...Vea Mas Dextrol™ OC-60 es la forma de ácido libre de un éster de fosfato de de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en almacenamiento. Vea Menos | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante au...Vea Mas Dextrol™ OC-6025 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades anticorrosivas. Vea Menos | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...Vea Mas Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. Vea Menos | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 es la forma de ácido libre de un éster de fosfato de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en alma...Vea Mas Dextrol™ OC-70 es la forma de ácido libre de un éster de fosfato de alcohol tridecílico etoxilado. Es un emulsionante eficaz en la polimerización de emulsiones y proporciona el látex final con bajo coágulo y mejora de la manipulación y estabilidad en almacenamiento. Vea Menos | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...Vea Mas Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. Vea Menos | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante au...Vea Mas Dextrol™ OC-7525 es un promotor de la aceptación de color y de brillo neutralizado con sal de hidróxido de amonio, sin APE, emulsionante para polimerización de emulsiones con una reducción de la sensibilidad al agua en las películas secas y dispersante auxiliar con propiedades anticorrosivas. Vea Menos | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...Vea Mas Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. Vea Menos | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...Vea Mas Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. Vea Menos | |
| Drew™ 210-886 | Ashland | Drew® 210-886 es un agente de control de espuma, diseñado especialmente para usar en revestimientos de superficie, barnices de sobreimpresión y la síntesis de emulsiones de polímero. Debido a su alta facilidad de incorporación, se probó como particularmen...Vea Mas Drew® 210-886 es un agente de control de espuma, diseñado especialmente para usar en revestimientos de superficie, barnices de sobreimpresión y la síntesis de emulsiones de polímero. Debido a su alta facilidad de incorporación, se probó como particularmente adecuado para sistemas de revestimiento de baja viscosidad como selladores y acabados aplicados por flujo de revestimiento, inmersión, revestimiento de cortina o rodillo o pincel. A niveles elevados de dosis, Drew® 210-886 muestra un rendimiento excelente en espray o espray sin aire aplicado en acabados de alto espesor. Vea Menos | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...Vea Mas Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. Vea Menos | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...Vea Mas Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. Vea Menos | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...Vea Mas Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. Vea Menos | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...Vea Mas Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. Vea Menos | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...Vea Mas Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. Vea Menos | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...Vea Mas Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. Vea Menos | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...Vea Mas Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. Vea Menos | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus® S-4273 agente de control de espuma está diseñado para el uso en revestimientos de superficie y tintas de impresión. Este producto se recomienda para el control de espuma en revestimientos de madera industriales, pinturas arquitectónicas de brill...Vea Mas Drewplus® S-4273 agente de control de espuma está diseñado para el uso en revestimientos de superficie y tintas de impresión. Este producto se recomienda para el control de espuma en revestimientos de madera industriales, pinturas arquitectónicas de brillo medio y alto y adhesivos. También se lograron excelentes resultados en tintas de impresión flexográficas y barnices de sobreimpresión. Vea Menos | |
| Drewplus™ S-4287 | Ashland | Drewplus® S-4287 (antes llamado DREW 210-793) es un agente de control de espuma para usar en revestimientos a base de agua. Está particularmente recomendado para pinturas decorativas de alto brillo. También se obtuvieron excelentes resultados en lacas par...Vea Mas Drewplus® S-4287 (antes llamado DREW 210-793) es un agente de control de espuma para usar en revestimientos a base de agua. Está particularmente recomendado para pinturas decorativas de alto brillo. También se obtuvieron excelentes resultados en lacas para parqué. También brinda excelentes propiedades desgasificantes en sistemas de pulverización (sin aire) de baja viscosidad. Drewplus® S-4287 muestra un equilibrio superior entre actividad y compatibilidad y es altamente eficiente. Es un producto con cero V.O.C. Vea Menos | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 agente de control de espuma es una formulación patentada no iónica de agentes activos de superficie y siliconas. Está diseñado para usarse en revestimientos a base de agua. Drewplus™ S-4288 agente de control de espuma está recomendado par...Vea Mas Drewplus™ S-4288 agente de control de espuma es una formulación patentada no iónica de agentes activos de superficie y siliconas. Está diseñado para usarse en revestimientos a base de agua. Drewplus™ S-4288 agente de control de espuma está recomendado para pinturas decorativas de alto brillo. También se obtuvieron excelentes resultados en lacas para parqué. Drewplus™ S-4288 agente de control de espuma brinda excelentes propiedades desgasificantes en sistemas de pulverización (sin aire) de baja viscosidad. Drewplus™ S-4288 agente de control de espuma muestra un equilibrio superior entre actividad y compatibilidad y es altamente eficiente. Vea Menos | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 agente de control de espuma está especialmente diseñado para usarse en revestimientos de superficie, barnices de sobreimpresión y tintas pigmentadas. Se demostró que el producto es especialmente adecuado para uso en revestimientos de made...Vea Mas Drewplus™ S-4374 agente de control de espuma está especialmente diseñado para usarse en revestimientos de superficie, barnices de sobreimpresión y tintas pigmentadas. Se demostró que el producto es especialmente adecuado para uso en revestimientos de madera industriales, aplicados con flujo de revestimiento, revestimiento de cortina o pulverización y también muestra excelente rendimiento en sistemas de revestimiento de madera aplicados con pincel o rodillo. Drewplus™ S-4374 agente de control de espuma es una emulsión activa al 40 por ciento de agentes activos en superficie e hidrófobos en agua. Vea Menos | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus® S-4386 agente de control de espuma es una emulsión acuosa no iónica de derivados de sílice, siliconas y tensioactivos. Está formulado para usarse en revestimientos a base de agua, tintas de impresión, artes gráficas, revestimientos de madera y p...Vea Mas Drewplus® S-4386 agente de control de espuma es una emulsión acuosa no iónica de derivados de sílice, siliconas y tensioactivos. Está formulado para usarse en revestimientos a base de agua, tintas de impresión, artes gráficas, revestimientos de madera y pinturas decorativas de alto brillo. Es un agente de control de espuma altamente eficiente con rápido desempeño y persistencia y compatibilidad excelentes. Vea Menos | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus® S-4480 agente de control de espuma es una mezcla no iónica de siliconas y aceite parafínico. Está formulado para usarse en revestimientos a base de agua, particularmente en sistemas claros. Es un agente de control de espuma altamente eficiente c...Vea Mas Drewplus® S-4480 agente de control de espuma es una mezcla no iónica de siliconas y aceite parafínico. Está formulado para usarse en revestimientos a base de agua, particularmente en sistemas claros. Es un agente de control de espuma altamente eficiente con rápido desempeño y persistencia y compatibilidad excelentes. Ya que funciona como un agente de liberación de aire, es especialmente efectivo en revestimientos de micro espuma y revestimientos aplicados con pulverización. Vea Menos | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...Vea Mas Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. Vea Menos | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...Vea Mas Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. Vea Menos | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...Vea Mas Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. Vea Menos | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...Vea Mas Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. Vea Menos | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...Vea Mas Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. Vea Menos | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...Vea Mas Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. Vea Menos | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus® T-4303 es un agente de control de espuma 100% activo para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de...Vea Mas Drewplus® T-4303 es un agente de control de espuma 100% activo para usar en procesos de revestimiento y polimerización de emulsión. Se lograron excelentes resultados en sistemas a base de acetato de polivinilo, adhesivos sensibles a la presión y tintas de impresión flexográficas. Drewplus® T-4303 es una formulación patentada no iónica de derivados de sílice, aceites minerales y ésteres. Vea Menos | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...Vea Mas Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Vea Menos | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 agente de control de espuma es una formulación patentada no iónica de derivados de sílice, siliconas y agentes activos de superficie para usar en revestimientos y tintas de impresión. Este producto está especialmente recomendado para rev...Vea Mas Drewplus™ TS-4384 agente de control de espuma es una formulación patentada no iónica de derivados de sílice, siliconas y agentes activos de superficie para usar en revestimientos y tintas de impresión. Este producto está especialmente recomendado para revestimientos de madera, pinturas arquitectónicas de brillo medio y alto y lacas para parqué a base de agua. También se obtuvieron excelentes resultados en imprimadores acrílicos anticorrosivos, tintas de impresión flexográficas y sistemas a base de alquídicos reducibles en agua. Drewplus™ TS-4384 agente de control de espuma es altamente eficiente y muestra excelente persistencia. Vea Menos | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus® TS-4385 agente de control de espuma está diseñado para usarse en revestimientos y tintas de impresión. Este producto está especialmente recomendado para revestimientos de madera, pinturas arquitectónicas de brillo medio y alto y lacas para parqu...Vea Mas Drewplus® TS-4385 agente de control de espuma está diseñado para usarse en revestimientos y tintas de impresión. Este producto está especialmente recomendado para revestimientos de madera, pinturas arquitectónicas de brillo medio y alto y lacas para parqué. Se obtuvieron excelentes resultados en imprimadores acrílicos anticorrosivos, tintas de impresión flexográficas y sistemas a base de alquídicos reducibles en agua. Este producto es altamente eficiente y muestra excelente persistencia. Vea Menos | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus® TS-4481 agente de control de espuma es una mezcla no iónica de derivados de sílice, siliconas y aceites parafínicos. Está formulado para usarse en revestimientos a base de agua. Es un agente de control de espuma altamente eficiente con rápido de...Vea Mas Drewplus® TS-4481 agente de control de espuma es una mezcla no iónica de derivados de sílice, siliconas y aceites parafínicos. Está formulado para usarse en revestimientos a base de agua. Es un agente de control de espuma altamente eficiente con rápido desempeño y persistencia y compatibilidad excelentes. Ya que funciona como agente liberador de aire es especialmente efectivo sobre micro espuma en revestimientos industriales aplicados con pulverización. Vea Menos | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...Vea Mas Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. Vea Menos | |
| EMULTEX™ FR 728 | Synthomer | EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 7...Vea Mas EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 728 is designed for intumescent coatings for fire protection up to R60. Vea Menos | |
| EMULTEX™ FR 797 | Synthomer | EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ ...Vea Mas EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ FR 797 is recommended for intumescent coatings with fire protection up to 120min. Vea Menos | |
| EMULTEX™ VV 665 | Synthomer | EMULTEX™ VV 665 is a medium particle size, specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 665 offers high scrub resistance, high gloss and good saponification resistance. EMULTEX™ VV 665 is recommended for s...Vea Mas EMULTEX™ VV 665 is a medium particle size, specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 665 offers high scrub resistance, high gloss and good saponification resistance. EMULTEX™ VV 665 is recommended for solvent free matt and silk paints. When suitably compounded EMULTEX™ VV 665 is recommended as a binder in the production of flexible fillers, caulks and DIY cartridge applied sealants. Vea Menos | |
| EMULTEX™ VV 675 | Synthomer | EMULTEX™ VV 675 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 675 offers high scrub resistance and high exterior durability. EMULTEX™ VV 675 is recommended for exterior masonry paints and s...Vea Mas EMULTEX™ VV 675 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 675 offers high scrub resistance and high exterior durability. EMULTEX™ VV 675 is recommended for exterior masonry paints and silk to gloss interior wall paints. Vea Menos | |
| EMULTEX™ VV 676 | Synthomer | EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming prope...Vea Mas EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming properties. EMULTEX™ VV 676 is recommended for a broad range of interior and exterior masonry coatings. Vea Menos | |
| EMULTEX™ VV 679 | Synthomer | EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be u...Vea Mas EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives. Vea Menos | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...Vea Mas GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. Vea Menos | |
| HYDRO PLIOLITE™ 050 | Synthomer | HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed ...Vea Mas HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed for low VOC stain blocking primers. Vea Menos | |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...Vea Mas HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. Vea Menos | |
| HYDRO PLIOLITE™ 330 | Synthomer | HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and s...Vea Mas HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. HYDRO PLIOLITE™ 330 is suitable for formulation of wood stains and wood trim paints. Vea Menos | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...Vea Mas Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. Vea Menos | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...Vea Mas Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. Vea Menos | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...Vea Mas Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. Vea Menos | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...Vea Mas KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. Vea Menos | |
| Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...Vea Mas Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. Vea Menos | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...Vea Mas KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. Vea Menos | |
| LIPATON™ SB 5521 | Synthomer | LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrop...Vea Mas LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings. Vea Menos | |
| LYTRON™ 180 AV | Synthomer | LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents...Vea Mas LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners. Vea Menos | |
| MOR-GLO™ 10 | Synthomer | MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and s...Vea Mas MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and shoe scuff resistance associated with high performance floor finishes. Vea Menos | |
| MOR-GLO™ 2 | Synthomer | MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor ...Vea Mas MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. Vea Menos | |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| MOR-GLO™ 8 | Synthomer | MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that p...Vea Mas MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that provide outstanding dirt resistance, reparability, and response to periodic ultra high speed maintenance. Vea Menos | |
| MOR-GLO™ 877 | Synthomer | MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes...Vea Mas MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others. Vea Menos | |
| MOR-GLO™ G128 | Synthomer | MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated int...Vea Mas MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes. Vea Menos | |
| MOR-GLO™ ULTRA AR | Synthomer | MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that ...Vea Mas MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that still retains the reparability and removability of one-component floor finish. Vea Menos | |
| MOR-GLO™ ULTRA G | Synthomer | MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finish...Vea Mas MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-Linked™ technology to deliver premium durability and performance. Vea Menos | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...Vea Mas MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. Vea Menos | |
| MOR-SHINE™ E | Synthomer | Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance. Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 hidroxietilcelulosa es un éter de celulosa no iónico soluble en agua. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC, un polímero no iónico soluble en agua, es un polvo blanco, granular de flujo libre. Es insoluble en solventes orgánicos, sin embargo, se dispersa fácilmente en agua fría y caliente para ofrecer soluciones de diferentes viscosidades. Este ...Vea Mas Natrosol™ B HEC, un polímero no iónico soluble en agua, es un polvo blanco, granular de flujo libre. Es insoluble en solventes orgánicos, sin embargo, se dispersa fácilmente en agua fría y caliente para ofrecer soluciones de diferentes viscosidades. Este producto se utiliza como un espesante, coloide protector, aglutinante, estabilizador y agente de suspensión, en particular en aplicaciones donde se desea un material no iónico. Vea Menos | |
| Natrosol™ FPS | Ashland | La suspensión de polímeros fluidizados Natrosol™ FPS ofrece suspensiones de líquido con alto contenido de sólidos diseñadas para una fácil manipulación en el equipo de fabricación de pintura convencional. | |
| Natrosol™ HE 10K | Ashland | Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and ex...Vea Mas Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and excellent package stability as well as offering less sensitivity to pH, surfactants, and other paint additives. Vea Menos | |
| Natrosol™ HE 3KB | Ashland | Natrosol™ HE 3KB modified hydroxyethylcellulose (HEC) is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It exhibits excellent enzyme resistance. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ hidroxietilcelulosa es un polímero no iónico soluble en agua derivado de celulosa y sus soluciones no se ven afectadas por cationes. Se disuelve fácilmente en agua fría o caliente y se utiliza para producir soluciones que tienen una amplia gam...Vea Mas Natrosol™ hidroxietilcelulosa es un polímero no iónico soluble en agua derivado de celulosa y sus soluciones no se ven afectadas por cationes. Se disuelve fácilmente en agua fría o caliente y se utiliza para producir soluciones que tienen una amplia gama de viscosidad. Vea Menos | |
| Natrosol™ Performax | Ashland | Natrosol™ Performax ha sido el espesante líder en revestimientos arquitectónicos a base de agua durante más de 50 años. Y ahora Natrosol™ Performax lleva la fabricación de pintura a niveles de flexibilidad del proceso y calidad del producto sin precedente...Vea Mas Natrosol™ Performax ha sido el espesante líder en revestimientos arquitectónicos a base de agua durante más de 50 años. Y ahora Natrosol™ Performax lleva la fabricación de pintura a niveles de flexibilidad del proceso y calidad del producto sin precedentes al permitir que el fabricante de pintura agregue HEC en una forma seca en cualquier punto del proceso de producción de pintura sin la formación de grumos. Vea Menos | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus HMHEC, grado 30, es una hidroxietilcelulosa modificada hidrofóbicamente. Grado 330 es un polímero celulósico asociativo diseñado específicamente para su uso en pinturas de látex. | |
| Natrosol™ Plus 330 PA 5075 | Ashland | Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosit...Vea Mas Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosity, therefore better film build, improved levelling with good sag resistance, and excellent storage stability. Vea Menos | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...Vea Mas Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. Vea Menos | |
| pHLEX™ 400 | Ashland | pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...Vea Mas pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 400 neutralizing agent, particularly when used in place of ammonium hydroxide. Vea Menos | |
| pHLEX™ 410 | Ashland | pHLEX™ 410 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...Vea Mas pHLEX™ 410 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 410 neutralizing agent, particularly when used in place of ammonium hydroxide. Vea Menos | |
| PLEXTOL™ A 6474 | Synthomer | PLEXTOL™ A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology. PLEXTOL™ A 6474 is a binder for exterior and interior clear or pigmented wood coatings. | |
| PLEXTOL™ B 500 | Synthomer | PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acry...Vea Mas PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acrylic polymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. Vea Menos | |
| PLEXTOL™ D 2610 | Synthomer | PLEXTOL D 2610 is an aqueous dispersion of an acrylic copolymer. PLEXTOL D 2610 dispersion is designed for various types of paints, on a wide range of pigment volume concentration (% PVC), from varnish to matte paints. | |
| PLEXTOL™ D 487 | Synthomer | PLEXTOL™ D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers. PLEXTOL™ D 487 is a low MFFT self-...Vea Mas PLEXTOL™ D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers. PLEXTOL™ D 487 is a low MFFT self-crosslinking pure acrylic with excellent adhesion on different substrates. It is highly recommended as multi-substrate binder and for universal renovation paints ("house-paints"). Vea Menos |
