| ERIS 130 | Omnova Solutions | ERIS 130 is an unsaturated polyester resin of medium reactivity with a 29% content on renewable raw materials. It has high stability to UV radiation and is allowed for use in contact with food. This product is supplied as approximately 67% of polymer dilu...Vea Mas ERIS 130 is an unsaturated polyester resin of medium reactivity with a 29% content on renewable raw materials. It has high stability to UV radiation and is allowed for use in contact with food. This product is supplied as approximately 67% of polymer diluted in styrene. Vea Menos | |
| ERIS 131 | Omnova Solutions | ERIS 131 is an unsaturated polyester resin of medium reactivity with a 27% content on renewable raw materials. It has high stability to UV radiation and is allowed for use in contact with food. | |
| ERIS 140 | Omnova Solutions | ERIS 140 is an unsaturated polyester resin of medium reactivity with a 54% content on renewable raw materials. It has high stability to UV radiation and is allowed for use in contact with food. This product is supplied as approximately 67% of polymer dilu...Vea Mas ERIS 140 is an unsaturated polyester resin of medium reactivity with a 54% content on renewable raw materials. It has high stability to UV radiation and is allowed for use in contact with food. This product is supplied as approximately 67% of polymer diluted in styrene. Vea Menos | |
| ERIS 180 | Omnova Solutions | ERIS 180 is a synthetic resin with 80% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 180 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product i...Vea Mas ERIS 180 is a synthetic resin with 80% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 180 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product is specially recommended for waterborne decorative paints. Vea Menos | |
| ERIS 280 | Omnova Solutions | ERIS 280 is a synthetic resin with 100% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 280 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product ...Vea Mas ERIS 280 is a synthetic resin with 100% content of renewable raw materials. Due to the high content of raw materials from renewable sources, ERIS 280 is a polymeric binder suitable for the formulation of paints with reduced carbon footprint. This product is specially recommended for waterborne decorative paints. Vea Menos | |
| Hydro PLIOLITE® 010 | Omnova Solutions | Hydro PLIOLITE® 010 is an acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent penetrative adhesion to porous masonry substrates and outstanding exterior weathering. Hydro PLIOLITE® 010 is ideally sui...Vea Mas Hydro PLIOLITE® 010 is an acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent penetrative adhesion to porous masonry substrates and outstanding exterior weathering. Hydro PLIOLITE® 010 is ideally suited for flat exterior masonry coatings, pigmented surface conditioners or interior tension-free wall and ceiling paints. Vea Menos | |
| Hydro PLIOLITE® 050 | Omnova Solutions | Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideall...Vea Mas Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideally suited for stain blocking primers and paints, multi purpose low VOC primers. Vea Menos | |
| Hydro PLIOLITE® 055 | Omnova Solutions | Hydro PLIOLITE® 055 is a substituted styrene acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent adhesion to weakly bound coatings, old paints, gypsum or cement based plasters. Hydro PLIOLITE® 055 al...Vea Mas Hydro PLIOLITE® 055 is a substituted styrene acrylate copolymer based on a proprietary EBS (Emulsified Binding System) technology, that allows excellent adhesion to weakly bound coatings, old paints, gypsum or cement based plasters. Hydro PLIOLITE® 055 also blocks most of the domestic stains encountered in renovation work, therefore is ideally suited for tension-free stain blocking matte paints. Vea Menos | |
| Hydro PLIOLITE® 211 | Omnova Solutions | Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive...Vea Mas Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive fire protection coatings, Hydro PLIOLITE 211 APEO-free styrene-acrylic emulsion copolymer offers performance similar to solvent-based coatings. This new binder demonstrates excellent resistance to water and weathering, which helps maintain coating integrity for structural steel exposed to weather extremes during construction. Additionally, its intumescent properties provides an excellent char structure with good adhesion and uniform char consistency. Ideal for all durability categories, it permits the formulation of coatings with 30–120 minutes of best-in-class fire protection. Vea Menos | |
| Hydro PLIOLITE® 330 | Omnova Solutions | Hydro PLIOLITE® 330 is a water-based binder that promotes excellent adhesion and blocking resistance even when dried under cold and wet weather conditions. | |
| Pliocryl® 4526 | Omnova Solutions | Pliocryl® 4526 is an orthophtalic unsaturated polyester resin, pre-accelerated and diluted in acrylic solvents. It is used in the formulation of traffic paints. After curing, Pliocryl® 4526 is distinguished for its hardness and elasticity, and has a good ...Vea Mas Pliocryl® 4526 is an orthophtalic unsaturated polyester resin, pre-accelerated and diluted in acrylic solvents. It is used in the formulation of traffic paints. After curing, Pliocryl® 4526 is distinguished for its hardness and elasticity, and has a good resistance to weather and abrasion. Vea Menos | |
| Pliocryl® 4600 | Omnova Solutions | Pliocryl® 4600 is a resin based on styrene and an acrylic acid ester. This product was specially developed for the formulation of paints for making traffic and floor paints. It is fast-drying, has good resistance to water, and good solubility in aromatic ...Vea Mas Pliocryl® 4600 is a resin based on styrene and an acrylic acid ester. This product was specially developed for the formulation of paints for making traffic and floor paints. It is fast-drying, has good resistance to water, and good solubility in aromatic solvents as well as esters and ketones. Vea Menos | |
| Pliocryl® 4660 | Omnova Solutions | Pliocryl® 4660 is an acrylic copolymer obtained by solution polymerization. This product was specially developed for the formulation of paints for road marking and paints for swimming pools. Pliocryl® 4660 is distinguished for its fast drying, good mechan...Vea Mas Pliocryl® 4660 is an acrylic copolymer obtained by solution polymerization. This product was specially developed for the formulation of paints for road marking and paints for swimming pools. Pliocryl® 4660 is distinguished for its fast drying, good mechanical properties, good resistance to water, and has a good solubility in aromatic solvents, esters and ketones. Vea Menos | |
| Pliocryl® 4670 | Omnova Solutions | Pliocryl® 4670 is an acrylic copolymer obtained by solution polymerization. It is recommended for paints for road marking and floor paints, and is distinguished for its extremely fast drying, excellent mechanical proprieties and good resistance to water. | |
| Pliocryl® 4728 | Omnova Solutions | Pliocryl® 4728 is a thermoplastic pure acrylic copolymer obtained by solution polymerization. It is recommended for the formulation of pavement coatings. It can also be used in coatings for building façades as well as in traffic marking and swimming pool ...Vea Mas Pliocryl® 4728 is a thermoplastic pure acrylic copolymer obtained by solution polymerization. It is recommended for the formulation of pavement coatings. It can also be used in coatings for building façades as well as in traffic marking and swimming pool paints. This product is distinguished for its extremely fast drying, high yellowing and UV resistance and excellent water and alkalinity resistance. Vea Menos | |
| Pliodisp® 3752 | Omnova Solutions | Pliodisp® 3752 is a non-associative acrylic thickener based on a copolymer of acrylic acid and an acrylic ester. It is used as an acrylic thickener for waterborne coatings. Pliodisp® 3752 develops very high viscosity in aqueous solutions and provides a hi...Vea Mas Pliodisp® 3752 is a non-associative acrylic thickener based on a copolymer of acrylic acid and an acrylic ester. It is used as an acrylic thickener for waterborne coatings. Pliodisp® 3752 develops very high viscosity in aqueous solutions and provides a highly thixotropic behavior to the final product. Vea Menos | |
| Pliodisp® 5305 | Omnova Solutions | Pliodisp® 5305 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is stabilized with polyvinyl alcohol and is used as an additive for cementitious mortars, as a plasticizer for cementitious mixtures, interior concrete floor...Vea Mas Pliodisp® 5305 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is stabilized with polyvinyl alcohol and is used as an additive for cementitious mortars, as a plasticizer for cementitious mixtures, interior concrete floors, and is also suitable for the formulation of spatula and leveling putties, as well as construction adhesives. Pliodisp® 5305 reduces the water/cement ratio and allows the mortar to exhibit better workability, elasticity and cracking resistance. Vea Menos | |
| Pliodisp® 5648 | Omnova Solutions | Pliodisp® 5648 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is specially recommended for the formulation of latex sealants. | |
| Pliodisp® 5731 | Omnova Solutions | Pliodisp® 5731 is a plasticizer-free aqueous copolymer dispersion based on acrylic and methacrylic esters. It is particularly recommended for the formulation of bonding agent between new concrete and the old one in repairing processes. | |
| Pliodisp® 6001 | Omnova Solutions | Pliodisp® 6001 is a plasticizer-free aqueous polyvinyl acetate dispersion. It is suitable for the formulation of permeable coatings, alone or in combination with other emulsions. | |
| Pliodisp® 6320 | Omnova Solutions | Pliodisp® 6320 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is stabilized with polyvinyl alcohol and is suitable for the manufacturing of coatings for food, especially for the manufacturing of coatings for hard cheese...Vea Mas Pliodisp® 6320 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is stabilized with polyvinyl alcohol and is suitable for the manufacturing of coatings for food, especially for the manufacturing of coatings for hard cheese. This coating prevents formation of mold and other micro-organisms during the ripening process in rooms with high humidity. Vea Menos | |
| Pliodisp® 6360 | Omnova Solutions | Pliodisp® 6360 is a plasticizer-free aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It is recommended for coatings for hard cheese and other food. | |
| Pliodisp® 6660 | Omnova Solutions | Pliodisp® 6660 is an aqueous copolymer emulsion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is suitable for the manufacturing of water resistant ceramic tile adhesives, external thermal insulating systems, and as a bind...Vea Mas Pliodisp® 6660 is an aqueous copolymer emulsion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is suitable for the manufacturing of water resistant ceramic tile adhesives, external thermal insulating systems, and as a binder for traffic paints. When in appropriate formulations, adhesives based on Pliodisp® 6660 conform to the requirements of UEATC (Specification for adhesives for use with ceramic tiles and mosaics). Vea Menos | |
| Pliodisp® 7215 | Omnova Solutions | Pliodisp® 7215 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of interior and exterior paints with an excelle...Vea Mas Pliodisp® 7215 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of interior and exterior paints with an excellent cost/performance ratio, semi-gloss paints with good characteristics regarding gloss and blocking resistance, to create deep shade paints, textured coatings, and as a binder for the formulation of medium and medium-high PVC paints. Pliodisp® 7215 high binding power allows the substitution of traditional binders of VAM/VeoVa, VAM/Acrylate or VAM/Ethylene. Vea Menos | |
| Pliodisp® 7218 | Omnova Solutions | Pliodisp® 7218 is a plasticizer-free aqueous copolymer dispersion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is especially recommended for the formulation of interior and exterior paints on a wide PVC range. Due to its high bindi...Vea Mas Pliodisp® 7218 is a plasticizer-free aqueous copolymer dispersion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is especially recommended for the formulation of interior and exterior paints on a wide PVC range. Due to its high binding power, Pliodisp® 7218 is suitable for medium-high PVC paints. This product is furthermore recommended for the manufacturing of semi-gloss paints with excellent characteristics regarding gloss and blocking resistance. Pliodisp® 7218 is also appropriate for textured paints. Vea Menos | |
| Pliodisp® 7252 | Omnova Solutions | Pliodisp® 7252 is a plasticizer-free aqueous copolymer dispersion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is especially suitable for the manufacturing of interior and exterior paints with excellent water, saponification and we...Vea Mas Pliodisp® 7252 is a plasticizer-free aqueous copolymer dispersion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is especially suitable for the manufacturing of interior and exterior paints with excellent water, saponification and weathering resistance. In contrast to traditional VAM/VeoVa based emulsions, Pliodisp® 7252 has an exceptionally high binding power. This product is also appropriate for the manufacturing of semi-gloss paints. The films of these paints have high blocking resistance. Vea Menos | |
| Pliodisp® 7580 | Omnova Solutions | Pliodisp® 7580 is an aqueous copolymer emulsion based on vinyl acetate and acrylic acid ester. It is stabilized with emulsifiers and polymer compounds and is new concept binder especially recommended for the formulation of interior and exterior flat paint...Vea Mas Pliodisp® 7580 is an aqueous copolymer emulsion based on vinyl acetate and acrylic acid ester. It is stabilized with emulsifiers and polymer compounds and is new concept binder especially recommended for the formulation of interior and exterior flat paints. It is also used as a binder for semi-gloss paints with high gloss and high blocking resistance, and for the production of deep shade paints and textured paints. Vea Menos | |
| Pliodisp® 7600 | Omnova Solutions | Pliodisp® 7600 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is recommended for the manufacturing of elastomeric wall and roof coatings with high elongation at break and ...Vea Mas Pliodisp® 7600 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is recommended for the manufacturing of elastomeric wall and roof coatings with high elongation at break and low water uptake. It can also be used as a binder in the formation of resin-bound plasters and textured coatings and for silicate paints and plasters. Paints formulated with Pliodisp® 7600 have high adhesion in wet in the substrates. Vea Menos | |
| Pliodisp® 7602 | Omnova Solutions | Pliodisp® 7602 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is recommended for the manufacturing of elastomeric wall and roof coatings with high elongation at break and ...Vea Mas Pliodisp® 7602 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is recommended for the manufacturing of elastomeric wall and roof coatings with high elongation at break and low water uptake. It can also be used as a binder in the formation of resin-bound plasters and textured coatings and for silicate paints and plasters. Paints formulated with Pliodisp® 7602 have high adhesion in wet in the substrates. Vea Menos | |
| Pliodisp® 7637 | Omnova Solutions | Pliodisp® 7637 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is a binder specially developed for the formulation of forced-drying coatings for several substrates such as concrete, fibre cement, bitumen, wo...Vea Mas Pliodisp® 7637 is a plasticizer-free aqueous copolymer dispersion based on acrylic acid esters and styrene. It is a binder specially developed for the formulation of forced-drying coatings for several substrates such as concrete, fibre cement, bitumen, wood, paperboard and metal. Vea Menos | |
| Pliodisp® 7648 | Omnova Solutions | Pliodisp® 7648 is an aqueous copolymer emulsion based on styrene and an acrylic acid ester. It is stabilized with emulsifiers and is used in the production of high PVC interior and exterior paints, also in the manufacturing of plasters and textured coatin...Vea Mas Pliodisp® 7648 is an aqueous copolymer emulsion based on styrene and an acrylic acid ester. It is stabilized with emulsifiers and is used in the production of high PVC interior and exterior paints, also in the manufacturing of plasters and textured coatings, as well as elastomeric roof coatings, and for the formulation of ceramic material adhesives. Vea Menos | |
| Pliodisp® 7663 | Omnova Solutions | Pliodisp® 7663 is an aqueous copolymer dispersion based on acrylic acid esters and styrene. It was especially developed as a binder for elastomeric wall coatings, thus allowing the formulation of water impermeable coatings. When in appropriate formulation...Vea Mas Pliodisp® 7663 is an aqueous copolymer dispersion based on acrylic acid esters and styrene. It was especially developed as a binder for elastomeric wall coatings, thus allowing the formulation of water impermeable coatings. When in appropriate formulations, Pliodisp® 7663 is also suitable for elastomeric roof coatings. The unique composition of Pliodisp® 7663 allows the formulation of elastomeric wall coatings with high elongation at break, low tack and low dirt pick up. Vea Menos | |
| Pliodisp® 7670 | Omnova Solutions | Pliodisp® 7670 is a plasticizer free aqueous copolymer emulsion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is suitable for the formation of penetrating primers and as a binder for impregnating wood stains. Due to its v...Vea Mas Pliodisp® 7670 is a plasticizer free aqueous copolymer emulsion based on acrylic acid esters and styrene. It is stabilized with emulsifiers and is suitable for the formation of penetrating primers and as a binder for impregnating wood stains. Due to its very low average particle size (approx. 0.06 μm) Pliodisp® 7670 is suitable for the formulation of clear and pigmented aqueous primers with good penetration properties on porous substrates like gypsum, plasters and concrete while maintaining the surface's rough texture allowing for the adherence between finishing layers. It's chemical composition enables it to also form products with high saponification resistance and excellent adhesion to the substrate. Vea Menos | |
| Pliodisp® 7685 | Omnova Solutions | Pliodisp® 7685 is an aqueous copolymer dispersion based on styrene and an acrylic acid ester. It is stabilized with emulsifiers and is used in the manufacturing of high PVC interior paints because of it's low viscosity. It may also be used in the formatio...Vea Mas Pliodisp® 7685 is an aqueous copolymer dispersion based on styrene and an acrylic acid ester. It is stabilized with emulsifiers and is used in the manufacturing of high PVC interior paints because of it's low viscosity. It may also be used in the formation of exterior paints. Vea Menos | |
| Pliodisp® 7693 | Omnova Solutions | Pliodisp® 7693 is an aqueous dispersion with low viscosity, especially recommended for the manufacturing of high PVC interior paints. Pliodisp® 7693 may also be used for the formulation of exterior paints. | |
| Pliodisp® 7730 | Omnova Solutions | Pliodisp® 7730 is an aqueous copolymer emulsion based on an acrylic acid ester and modified with styrene. It is stabilized with emulsifiers and is designed as a binder for elastomeric wall and roof coatings. Pliodisp® 7730 aids in the formulation of imper...Vea Mas Pliodisp® 7730 is an aqueous copolymer emulsion based on an acrylic acid ester and modified with styrene. It is stabilized with emulsifiers and is designed as a binder for elastomeric wall and roof coatings. Pliodisp® 7730 aids in the formulation of impermeable coatings with excellent aging behavior. It also shows a high elongation at break down to negative temperatures. Films of Pliodisp® 7730 exhibit low water uptake and high saponification resistance. Because Pliodisp® 7730 has both internal and radiation curing cross-linking systems, tack and dirt pick-up are significantly reduced. Products formed with Pliodisp® 7730 have an initial low tack. Vea Menos | |
| Pliodisp® 7735 | Omnova Solutions | Pliodisp® 7735 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is a pure acrylic binder especially designed for elastomeric wall coatings. Coatings based on Pliodisp® 773...Vea Mas Pliodisp® 7735 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is a pure acrylic binder especially designed for elastomeric wall coatings. Coatings based on Pliodisp® 7735 exhibit excellent exterior durability, outstanding dirt pick up resistance and good low & high temperature elasticity. Coatings made with Pliodisp® 7735 have UV resistance and improved chalk resistance and well as "breathability" by allowing water vapor to permeate out of the substrate. Vea Menos | |
| Pliodisp® 7744 | Omnova Solutions | Pliodisp® 7744 is a plasticizer-free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high quality exterior paints with excellent weathering resistance. Pli...Vea Mas Pliodisp® 7744 is a plasticizer-free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high quality exterior paints with excellent weathering resistance. Pliodisp® 7744's monometric composition and stabilization system allows for the formation of exterior paints with low dirt pick-up and high durability. The addition of organic titanates or zirconates leads to a thixotropic behavior. Vea Menos | |
| Pliodisp® 7757 | Omnova Solutions | Pliodisp® 7757 is a plasticizer-free aqueous copolymer dispersion based on acrylic and methacrylic esters. It is a binder especially developed for the manufacturing of high quality exterior paints. Coatings based on this product present excellent weatheri...Vea Mas Pliodisp® 7757 is a plasticizer-free aqueous copolymer dispersion based on acrylic and methacrylic esters. It is a binder especially developed for the manufacturing of high quality exterior paints. Coatings based on this product present excellent weathering resistance. Pliodisp® 7757 is also suitable for the formulation of semi-gloss paints, high gloss paints and wood stains. Vea Menos | |
| Pliodisp® 7776 | Omnova Solutions | Pliodisp® 7776 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high gloss paints, semi-gloss paints, wood stains and exterior paints....Vea Mas Pliodisp® 7776 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high gloss paints, semi-gloss paints, wood stains and exterior paints. Paints made with Pliodisp® 7776 have excellent weathering resistance, good resistance to aging and low dirt pick-up. Vea Menos | |
| Pliodisp® 7778 | Omnova Solutions | Pliodisp® 7778 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high gloss paints, semi-gloss paints, wood stains and exterior paints....Vea Mas Pliodisp® 7778 is a plasticizer free aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is suitable for the manufacturing of high gloss paints, semi-gloss paints, wood stains and exterior paints. Paints made with Pliodisp® 7778 have excellent weathering resistance, good resistance to aging and low dirt pick-up. The formulated products based on Pliodisp® 7778 exhibit high wet adhesion on substrates. Vea Menos | |
| Pliodisp® 7788 | Omnova Solutions | Pliodisp® 7788 is an aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is especially suitable for manufacturing paints with low VOC (Volatile Organic Compounds) content. Pliodisp® 7788 allows fo...Vea Mas Pliodisp® 7788 is an aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is especially suitable for manufacturing paints with low VOC (Volatile Organic Compounds) content. Pliodisp® 7788 allows for the formation of matte and semi-gloss interior paints, as well as the deep shade paints without the need of coalescing agents to reduce the minimum film formation temperature. It is also used as a binder for the formation of aqueous primers. It has an average particle size of approximately 0.10μm. Vea Menos | |
| Pliodisp® 9315 | Omnova Solutions | Pliodisp® 9315 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is a binder stabilized with polyvinyl alcohol and is recommended for the formulation of elastomeric wood and wall coatings, textured coatings, and plasters. ...Vea Mas Pliodisp® 9315 is an aqueous copolymer emulsion based on vinyl acetate and di-n-butyl maleate. It is a binder stabilized with polyvinyl alcohol and is recommended for the formulation of elastomeric wood and wall coatings, textured coatings, and plasters. The paint films do not become brittle in humid conditions and exhibit high water vapor permeability. Vea Menos | |
| Pliodisp® 9657 | Omnova Solutions | Pliodisp® 9657 is a plasticizer-free aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. It is recommended for the formulation of gloss paints and wood stains. Due to its singular heterogeneous morphology, the coatings b...Vea Mas Pliodisp® 9657 is a plasticizer-free aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. It is recommended for the formulation of gloss paints and wood stains. Due to its singular heterogeneous morphology, the coatings based on Pliodisp® 9657 exhibit high blocking resistance. The formulated products with Pliodisp® 9657 present good wet adhesion on several substrates. Vea Menos | |
| Pliodisp® 9770 | Omnova Solutions | Pliodisp® 9770 is a plasticizer-freeaqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is specially recommended for the formulation of penetrating aqueous primers. | |
| Pliodisp® 9951 | Omnova Solutions | Pliodisp® 9951 is a plasticizer-free aqueous copolymer dispersion based on VeoVa® (vinyl ester of versatic acid) and acrylic/methacrylic acids esters. It is recommended for the formulation of high performance anticorrosive primers and direct-to-metal (DTM...Vea Mas Pliodisp® 9951 is a plasticizer-free aqueous copolymer dispersion based on VeoVa® (vinyl ester of versatic acid) and acrylic/methacrylic acids esters. It is recommended for the formulation of high performance anticorrosive primers and direct-to-metal (DTM) coatings. Vea Menos | |
| Pliodisp® 9957 | Omnova Solutions | Pliodisp® 9957 is a plasticizer-free aqueous copolymer dispersion based on VeoVa® (vinyl ester of versatic acid) and acrylic/methacrylic acids esters. It is specially recommended for the formulation of high performance wood coatings. Due to its hydrophobi...Vea Mas Pliodisp® 9957 is a plasticizer-free aqueous copolymer dispersion based on VeoVa® (vinyl ester of versatic acid) and acrylic/methacrylic acids esters. It is specially recommended for the formulation of high performance wood coatings. Due to its hydrophobic nature, products based on Pliodisp® 9957 are characterized by very low end-grain raising, in addition to high durability, good breathability, and low water sensitivity. Vea Menos | |
| Pliodisp® 9958 | Omnova Solutions | Pliodisp® 9958 is a plasticizer-free aqueous copolymer dispersion based on VeoVa® (vinyl ester of versatic acid) and acrylic/methacrylic acids esters. | |
| Pliodisp® DM 21 | Omnova Solutions | Pliodisp® DM 21 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized by polymer compounds and has a broad application of interior and exterior paints, deep shade paints and resin-bound plaster...Vea Mas Pliodisp® DM 21 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized by polymer compounds and has a broad application of interior and exterior paints, deep shade paints and resin-bound plasters, textured coatings, external thermal insulating systems, and flocking adhesives. Due to its special rheology, Pliodisp® DM 21 has a characteristic yield stress. Vea Menos | |
| Pliodisp® DM 23 | Omnova Solutions | Pliodisp® DM 23 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of low PVC semi-gloss paints, medium PVC inter...Vea Mas Pliodisp® DM 23 is an aqueous copolymer emulsion based on vinyl acetate and VeoVa® (vinyl ester of versatic acid). It is stabilized with emulsifiers and polymer compounds and is suitable for the manufacturing of low PVC semi-gloss paints, medium PVC interior and exterior paints, and textured coatings. Vea Menos | |
| Pliodisp® DV | Omnova Solutions | Pliodisp® DV is a plasticizer-free aqueous polymer emulsion based on vinyl acetate. It is stabilized with emulsifiers and is suitable as a binder for heat seal coatings for paper, textile finishes with high penetration power, and in starch semi-permanent ...Vea Mas Pliodisp® DV is a plasticizer-free aqueous polymer emulsion based on vinyl acetate. It is stabilized with emulsifiers and is suitable as a binder for heat seal coatings for paper, textile finishes with high penetration power, and in starch semi-permanent finishes. It was a low particle size of approximately 0.20μm and can be used as a sole binder or in mixtures with latex emulsions such as Pliodisp® D 50. Vea Menos | |
| Pliolak® AC 350 | Omnova Solutions | Pliolak® AC 350 is a short-oil non-drying alkyd resin based on coconut oil. It is composed of 35% oil and 46% phthalic anhydride and its delivery form is 60% in Xylene. Pliolak® AC 350 is compatible with most of medium-oil alkyd resins, hard resins and ni...Vea Mas Pliolak® AC 350 is a short-oil non-drying alkyd resin based on coconut oil. It is composed of 35% oil and 46% phthalic anhydride and its delivery form is 60% in Xylene. Pliolak® AC 350 is compatible with most of medium-oil alkyd resins, hard resins and nitrocellulose. Its applications include stoving enamels and nitrocellulose wood and metal lacquers and acid curing enamels when mixed with unplasticized urea resins and suitable acid hardeners. Vea Menos | |
| Pliolak® AF 468 | Omnova Solutions | Pliolak® AF 468 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 46% oil and 29% phthalic anhydride and its delivery form is 65% in Toluene. Pliolak® AF 468 is compatible with most of short and medium-oil alkyd resins. ...Vea Mas Pliolak® AF 468 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 46% oil and 29% phthalic anhydride and its delivery form is 65% in Toluene. Pliolak® AF 468 is compatible with most of short and medium-oil alkyd resins. Its applications include traffic paints and primary and fast drying enamels. Products based on Pliolak® AF 468 are characterized by being fast drying and having a high hardness. Vea Menos | |
| Pliolak® AF 475 - 55% in White Spirit/Xylene | Omnova Solutions | Pliolak® AF 475 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 47% oil and 27% phthalic anhydride and its delivery form is 55% in White Spirit/Xylene. Pliolak® AF 475 is compatible with short and medium-oil alkyd resi...Vea Mas Pliolak® AF 475 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 47% oil and 27% phthalic anhydride and its delivery form is 55% in White Spirit/Xylene. Pliolak® AF 475 is compatible with short and medium-oil alkyd resins and its applications include air and forced-drying industrial finishes and radiator paints with good resistance to yellowing. It allows uniform film formation without surface flaw even when thick coatings are applied. Vea Menos | |
| Pliolak® AF 475 - 65% in Xylene | Omnova Solutions | Pliolak® AF 475 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 47% oil and 27% phthalic anhydride and its delivery form is 65% in Xylene. Pliolak® AF 475 is compatible with short and medium-oil alkyd resins and its ap...Vea Mas Pliolak® AF 475 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed of 47% oil and 27% phthalic anhydride and its delivery form is 65% in Xylene. Pliolak® AF 475 is compatible with short and medium-oil alkyd resins and its applications include air and forced-drying industrial finishes and radiator paints with good resistance to yellowing. It allows uniform film formation without surface flaw even when thick coatings are applied. Pliolak® AF 475 - 65% in Xylene is suitable for the manufacturing of enamels finished with xylene. Vea Menos | |
| Pliolak® AF 522 | Omnova Solutions | Pliolak® AF 522 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed 52% oil and 25% phthalic anhydride and its delivery form is 60% in Solvent D 40. Pliolak® AF 522 is compatible with most of long and medium-oil alkyd resins....Vea Mas Pliolak® AF 522 is a medium-oil drying alkyd resin based on vegetable fatty acids. It is composed 52% oil and 25% phthalic anhydride and its delivery form is 60% in Solvent D 40. Pliolak® AF 522 is compatible with most of long and medium-oil alkyd resins. Its applications include decorative enamels and varnishes for the architectural sector and industrial primers and enamels. Pliolak® AF 522 is characterized by its excellent drying, high hardness, yellowing, weathering and heat resistances, and while maintaining brightness and flexibility. Vea Menos | |
| Pliolak® AF 628 | Omnova Solutions | Pliolak® AF 628 is a long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 62% oil and 26% phthalic anhydride and its delivery form is 70% in Solvent D 40. Pliolak® AF 628 is compatible with most of long and medium-oil alkyd resins...Vea Mas Pliolak® AF 628 is a long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 62% oil and 26% phthalic anhydride and its delivery form is 70% in Solvent D 40. Pliolak® AF 628 is compatible with most of long and medium-oil alkyd resins. Its applications include decorative enamels and lacquers for DIY and architectural sectors. Pliolak® AF 628 is characterized by its excellent drying, good applicability, weathering resistance and maintenance of the brightness. Pliolak® AF 628 does not contain solvent which are classified as dangerous for the environment. Vea Menos | |
| Pliolak® AF 654 E | Omnova Solutions | Pliolak® AF 654 E is a long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 65% oil and 26% phthalic anhydride and its delivery form is 70% white spirits. Pliolak® AF 654 E is compatible with most of medium and long-oil alkyd resi...Vea Mas Pliolak® AF 654 E is a long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 65% oil and 26% phthalic anhydride and its delivery form is 70% white spirits. Pliolak® AF 654 E is compatible with most of medium and long-oil alkyd resins. Its applications include decorative enamels for the architectural sector as well as in primers and anti-corrosion paints. Pliolak® AF 654 E displays excellent complete-drying properties, good applicability, high yellowing and weathering resistance, as well as high gloss retention and flexibility. Vea Menos | |
| Pliolak® AF 704 | Omnova Solutions | Pliolak® AF 704 is a high solids, long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 70% oil and 16% phthalic anhydride and its delivery form is 85% in Dearomatized White Spirit. Pliolak® AF 704 is compatible with most long-oil ...Vea Mas Pliolak® AF 704 is a high solids, long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 70% oil and 16% phthalic anhydride and its delivery form is 85% in Dearomatized White Spirit. Pliolak® AF 704 is compatible with most long-oil alkyd resins. It's applications include high solids decorative enamels and varnishes for the architectural sector that fulfill the VOC (Volatile Organic Compounds) emissions limits defined in the Directive 42/2004/CE. The products based on Pliolak® AF 704 display good applicability, excellent complete-drying properties, color retention and hardness. Vea Menos | |
| Pliolak® AH 832 | Omnova Solutions | Pliolak AH 832 is a high solids, long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 83% oil and its delivery form is approximately 100%. Pliolak® AH 832 is compatible with most of long-oil alkyd resins. Its applications include ...Vea Mas Pliolak AH 832 is a high solids, long-oil drying alkyd resin based on vegetable fatty acids. It is composed of 83% oil and its delivery form is approximately 100%. Pliolak® AH 832 is compatible with most of long-oil alkyd resins. Its applications include high solids decorative enamels and varnishes. Vea Menos | |
| Pliolak® AL 532 | Omnova Solutions | Pliolak® AL 532 is a medium-oil drying alkyd resin based on linseed oil. It is composed of 53% oil and 28% phthalic anhydride and its delivery form is 50% in Solvent D 40. It is used in the formation of decorative enamels for the architectural sector. It ...Vea Mas Pliolak® AL 532 is a medium-oil drying alkyd resin based on linseed oil. It is composed of 53% oil and 28% phthalic anhydride and its delivery form is 50% in Solvent D 40. It is used in the formation of decorative enamels for the architectural sector. It is not recommended for white enamels due to its propensity to yellow. Products based on Pliolak® AL 532 present good hardening and good drying. Pliolak® AL 532 presents excellent adherence, good resistance to heat and gloss. Vea Menos | |
| Pliolak® AL 634 | Omnova Solutions | Pliolak® AL 634 is a long-oil drying alkyd resin based on linseed oil. It is composed of 63% oil and 24% phthalic anhydride and its delivery form is 70% in Solvent D 40. Pliolak® AL 634 is compatible with most of long-oil alkyd resins and hard resins. It'...Vea Mas Pliolak® AL 634 is a long-oil drying alkyd resin based on linseed oil. It is composed of 63% oil and 24% phthalic anhydride and its delivery form is 70% in Solvent D 40. Pliolak® AL 634 is compatible with most of long-oil alkyd resins and hard resins. It's applications include primers and enamels for the architectural sector, anti-corrosion paints, and products with good impact resistance. Due to its good pigment wetting properties, Pliolak® AL 634 recommended for the manufacturing of colored paints. Pliolak® AL 634 provides better gloss in colored enamels, however it shows poorer yellowing resistance. Vea Menos | |
| Pliolak® AM 342 | Omnova Solutions | Pliolak® AM 342 is a short-oil drying alkyd resin based on linseed and wood oil, modified with phenolic compounds. It is composed of 35% oil and 36% phthalic anhydride and its delivery form is 50% in Xylene. Its applications include primers for spray or b...Vea Mas Pliolak® AM 342 is a short-oil drying alkyd resin based on linseed and wood oil, modified with phenolic compounds. It is composed of 35% oil and 36% phthalic anhydride and its delivery form is 50% in Xylene. Its applications include primers for spray or brush application, fast-drying enamels for agricultural machinery, and hammer finishes. The formulated products exhibit fast-drying, good metal adhesion and good resistance to chemicals and water. Air-drying primers based on Pliolak® AM 342 can also be coated with nitrocellulose finishes. Due to its relatively high yellowing tendency, Pliolak AM 342 is not recommended for the manufacturing of white or light shade enamels. Vea Menos | |
| Pliolak® AR 320 | Omnova Solutions | Pliolak® AR 320 is a short-oil drying alkyd resin based on vegetable fatty acids. It is composed of 32% oil and 43% phthalic anhydride and its delivery form is 50% in Xylene/Methyl ketone. Pliolak® AR 320 is suitable for the formulation of quick-sanding w...Vea Mas Pliolak® AR 320 is a short-oil drying alkyd resin based on vegetable fatty acids. It is composed of 32% oil and 43% phthalic anhydride and its delivery form is 50% in Xylene/Methyl ketone. Pliolak® AR 320 is suitable for the formulation of quick-sanding wood primers and undercoats with fast-drying, high chemical resistance and hardness. Formulation of quick-sanding coatings can be obtained by the combination of Pliolak® AR 320 with isocyanates. Vea Menos | |
| Pliolak® AR 370 | Omnova Solutions | Pliolak® AR 370 is a short-oil drying alkyd resin based on vegetable fatty acids. It is specially adequate for the production of two components undercoats for wood furniture, in combination with isocyanates. This product is suitable for the formulation of...Vea Mas Pliolak® AR 370 is a short-oil drying alkyd resin based on vegetable fatty acids. It is specially adequate for the production of two components undercoats for wood furniture, in combination with isocyanates. This product is suitable for the formulation of quick-sanding wood clear topcoats with fast-drying, high chemical resistance and softness to the touch. Vea Menos | |
| Pliolak® AS 245 | Omnova Solutions | Pliolak® AS 245 is a short-oil drying alkyd resin based on soya-bean oil. It is compatible with most of short and medium-oil alkyd resins. This product is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorros...Vea Mas Pliolak® AS 245 is a short-oil drying alkyd resin based on soya-bean oil. It is compatible with most of short and medium-oil alkyd resins. This product is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primers. Pliolak® AS 245 may also be used as plasticizer in combination with melamine resins for stoving enamels as well as with nitrocellulose and also for acid curing lacquers. Pliolak® AS 245 is suitable for the formulation of two components clear topcoats for wood furniture, in combination with isocyanates. Vea Menos | |
| Pliolak® AS 284 | Omnova Solutions | Pliolak® AS 284 is a short-oil drying alkyd resin based on soya-bean oil. It is composed of 22% oil and 40% phthalic anhydride and its delivery form is 60% in Xylene. Pliolak® AS 284 is compatible with most of short and medium-oil alkyd resins, hard resin...Vea Mas Pliolak® AS 284 is a short-oil drying alkyd resin based on soya-bean oil. It is composed of 22% oil and 40% phthalic anhydride and its delivery form is 60% in Xylene. Pliolak® AS 284 is compatible with most of short and medium-oil alkyd resins, hard resins and nitrocellulose. It is suitable for the manufacturing of nitrocellulose lacquers and paints for metal or wood surfaces, anti-corrosion primers and air-drying enamels.The binding ability of Pliolak® AS 284 allows the formulation of industrial enamels with high gloss and excellent resistance to yellowing and color retention. Vea Menos | |
| Pliolak® AS 429 | Omnova Solutions | Pliolak® AS 429 is a short-oil drying alkyd resin based on linoleic acid, esterified with pentaerythritol and with high content of phthalic anhydride. It is composed of 42% oil and 23% phthalic anhydride and has a delivery form of 60% in Xylene. It is com...Vea Mas Pliolak® AS 429 is a short-oil drying alkyd resin based on linoleic acid, esterified with pentaerythritol and with high content of phthalic anhydride. It is composed of 42% oil and 23% phthalic anhydride and has a delivery form of 60% in Xylene. It is compatible with short and medium-oil alkyd resins. Pliolak® AS 429 is suitable for air-drying enamels and stoving enamels with excellent hardness, flexibility, adhesion, and color retention. When combined with amino acids it has excellent toughness and resistance to water. Pliolak® AS 429 can be used for the formulation of clear or white enamels and cured enamels at low temperature. Vea Menos | |
| Pliolak® AS 496 | Omnova Solutions | Pliolak® AS 496 is a medium-oil drying alkyd resin based on soya-bean oil. It is composed of 49% oil and 26% phthalic anhydride and a delivery form of 45% in Solvent D 40. It is suitable for the formulation of air drying enamels with high hardness. Produc...Vea Mas Pliolak® AS 496 is a medium-oil drying alkyd resin based on soya-bean oil. It is composed of 49% oil and 26% phthalic anhydride and a delivery form of 45% in Solvent D 40. It is suitable for the formulation of air drying enamels with high hardness. Products based on Pliolak® AS 496 have excellent adhesion, gloss and good resistance to heat. It is also an excellent binder for the production of enamels and paints with an excellent cost to performance ratio. Vea Menos | |
| Pliolak® AS 622 | Omnova Solutions | Pliolak® AS 622 is a long-oil drying alkyd resin based on sunflower oil. It is composed of 62% oil and 25% and has a delivery form of 75% in Solvent D 40. It is suitable for the manufacturing of decorative enamels and lacquers for the architectural sector...Vea Mas Pliolak® AS 622 is a long-oil drying alkyd resin based on sunflower oil. It is composed of 62% oil and 25% and has a delivery form of 75% in Solvent D 40. It is suitable for the manufacturing of decorative enamels and lacquers for the architectural sector. It can be used either as sole binder or in combination with high solids resins. Due to its low tendency to yellowing, Pliolak® AS 622 is recommended for the formulation of white decorative coatings. Products based on Pliolak® AS 622 exhibit excellent applicability and gloss, as well as weathering resistance, with low gloss decrease. Vea Menos | |
| Pliolak® AS 652 | Omnova Solutions | Pliolak® AS 652 is a long-oil drying alkyd resin based on soya-bean oil. It is composed of 65% oil and 23% phthalic anhydride and has a delivery form of 75% in Solvent D 40. Pliolak® AS 652 is compatible with most of medium and long-oil alkyd resins, as w...Vea Mas Pliolak® AS 652 is a long-oil drying alkyd resin based on soya-bean oil. It is composed of 65% oil and 23% phthalic anhydride and has a delivery form of 75% in Solvent D 40. Pliolak® AS 652 is compatible with most of medium and long-oil alkyd resins, as well as hard maleic resins. It is suitable for the the manufacture of decorative enamels, coatings and lacquers for the architectural and DIY sectors. Products made with Pliolak® AS 652 have good applicability and excellent drying properties, exhibit good weathering resistance with low gloss decrease, and for white gloss enamels that fulfill the VOC’s (Volatile Organic Compounds) emissions’ limits for 2010 as defined in the Directive 42/2004/CE. Vea Menos | |
| Pliolak® AU 520 | Omnova Solutions | Pliolak® AU 520 is a medium oil urethane alkyd resin, based on vegetable fatty acids. It is composed of 52% oil and 18% phthalic anhydride and has a delivery form of 60% in Solvent D 40. This product is compatible with most of medium and long-oil alkyd re...Vea Mas Pliolak® AU 520 is a medium oil urethane alkyd resin, based on vegetable fatty acids. It is composed of 52% oil and 18% phthalic anhydride and has a delivery form of 60% in Solvent D 40. This product is compatible with most of medium and long-oil alkyd resins. Pliolak® AU 520 is used in combination with conventional alkyd resins for the manufacture of semi-gloss paints and for the protection and decoration of surfaces and products based on it exhibit excellent hardness and are fast-drying, as well as toughness and abrasion resistance. Vea Menos | |
| Pliolak® AU 620 | Omnova Solutions | Pliolak® AU 620 is a long oil urethane alkyd resin, based on vegetable fatty acids. It is composed of 62% oil and 12% phthalic anhydride and has a delivery form of 60% in Solvent D 40. This product is compatible with most medium and long-oil alkyd resins....Vea Mas Pliolak® AU 620 is a long oil urethane alkyd resin, based on vegetable fatty acids. It is composed of 62% oil and 12% phthalic anhydride and has a delivery form of 60% in Solvent D 40. This product is compatible with most medium and long-oil alkyd resins. It is used in the manufacturing of semi brilliant paints and for the protection and decoration of surfaces and soil cement. It has high resistance to abrasion and saponification and is viable as a coating for boats, although it is not suitable for white paints. Vea Menos | |
| Pliolak® AV 303 | Omnova Solutions | Pliolak® AV 303 is a short-oil drying alkyd resin modified with styrene. It is composed of 30% oil, 19% phthalic anhydride, and 45% styrene and has a delivery form of 60% in Xylene. This product is used in the manufacturing of fast air-drying or stoving p...Vea Mas Pliolak® AV 303 is a short-oil drying alkyd resin modified with styrene. It is composed of 30% oil, 19% phthalic anhydride, and 45% styrene and has a delivery form of 60% in Xylene. This product is used in the manufacturing of fast air-drying or stoving primers and enamels for metal surfances, hammer finishes, and can be force-dried at elevated temperatures or stoved at even higher temperatures. Coatings based on Pliolak® AV 303 display good resistance to humid conditions, water and alkaline cleaning agents, and also to the short-term effects of oil and lubricants. Vea Menos | |
| PLIOLITE® AC3-H | Omnova Solutions | PLIOLITE® AC3-H is a highly soluble vinyl toluene-acrylate copolymer, developed specifically to be used with PLIOLITE® resins based on vinyl toluene, thus eliminating the need for external thickeners often detrimental to film performance. PLIOLITE® AC3-H ...Vea Mas PLIOLITE® AC3-H is a highly soluble vinyl toluene-acrylate copolymer, developed specifically to be used with PLIOLITE® resins based on vinyl toluene, thus eliminating the need for external thickeners often detrimental to film performance. PLIOLITE® AC3-H is mainly used in combination with VTAC-L for the formulation of intumescent coatings, high build masonry paints and alkali resistant masonry sealers. Vea Menos | |
| PLIOLITE® AC4 | Omnova Solutions | PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resi...Vea Mas PLIOLITE® AC4 is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a thixotropic behavior. PLIOLITE® AC4 forms tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Typical applications include: exterior masonry coatings, structural steel, intumescent coatings. Vea Menos | |
| PLIOLITE® AC5G | Omnova Solutions | PLIOLITE® AC5G is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a pseudoplastic behavior. PLIOLITE® AC5G forms tough abrasion and chemically ...Vea Mas PLIOLITE® AC5G is a styrene acrylate copolymer, often used in combination with AC80. This thermoplastic resin is a unique film forming rheological resin that develops a gel with a pseudoplastic behavior. PLIOLITE® AC5G forms tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Typical applications include: exterior masonry coatings, anticarbonation paints, intumescent coatings. Vea Menos | |
| PLIOLITE® AC80 | Omnova Solutions | PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applicatio...Vea Mas PLIOLITE® AC80 is a newtonian styrene acrylate copolymer, often used in combination with AC4 or AC5G. PLIOLITE® AC80 forms tough abrasion, chemically resistant films that have excellent adhesion, UV resistance and weathering properties. Typical applications include: "all weather" masonry coatings, anticarbonation, metal protective, intumescent coatings. Vea Menos | |
| PLIOLITE® S5E | Omnova Solutions | PLIOLITE® S5E is a newtonian styrene butadiene copolymer, that forms tough films with excellent chemical and abrasion resistance. PLIOLITE® S5E provides excellent alkali resistance and can be used for example in masonry primers, road marking paints or con...Vea Mas PLIOLITE® S5E is a newtonian styrene butadiene copolymer, that forms tough films with excellent chemical and abrasion resistance. PLIOLITE® S5E provides excellent alkali resistance and can be used for example in masonry primers, road marking paints or concrete curing membrane. Vea Menos | |
| PLIOLITE® VTAC-H | Omnova Solutions | PLIOLITE® VTAC-H is a highly soluble vinyl toluene-acrylate copolymer. This newtonian thermoplastic resin is a high molecular weight, high viscosity version of PLIOLITE® VTAC-L. PLIOLITE® VTAC-H is ideally suited for multicolor paints. | |
| PLIOLITE® VTAC-L | Omnova Solutions | PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of ...Vea Mas PLIOLITE® VTAC-L is a highly soluble vinyl toluene-acrylate copolymer. This newtonian film forming resin is recommended for applications where high solubility, high film hardness, good adhesion and balanced ageing properties are required. Typical uses of PLIOLITE® VTAC-L (alone or in combination with AC3-H) include: flat or high build masonry paints, intumescent coatings. Vea Menos | |
| PLIOTEC® 7104E | Omnova Solutions | PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, exce...Vea Mas PLIOTEC® 7104E is a carboxylated styrene acrylic dispersion used in coatings that form resistant films with excellent adhesion to concrete. PLIOTEC® 7104E is very suitable for waterproofing sealers or one pack floor coatings with abrasion resistance, excellent hardness development, hot-tire pick up resistance and very good resistance to automotive chemicals. Vea Menos | |
| PLIOTEC® CR78 | Omnova Solutions | PLIOTEC® CR78 is an acrylic copolymer latex specifically designed for garage floor coatings, with excellent water and early moisture resistance. PLIOTEC® CR78 allows to achieve a very good hot-tire pick up and excellent chemical resistance (alkali, acid, ...Vea Mas PLIOTEC® CR78 is an acrylic copolymer latex specifically designed for garage floor coatings, with excellent water and early moisture resistance. PLIOTEC® CR78 allows to achieve a very good hot-tire pick up and excellent chemical resistance (alkali, acid, automotive fluids, unleaded petrol). Vea Menos | |
| PLIOTEC® EL25 | Omnova Solutions | PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridg...Vea Mas PLIOTEC® EL25 is an elastomeric acrylic latex very suitable for the formulation of high performance coatings with superior elastomeric properties across a broad temperature range. PLIOTEC® EL25 provides excellent tensile/elongation properties, crack-bridging ability, excellent dirt pick-up resistance and UV resistance. Typical applications include: vertical exterior masonry coatings and roof coatings. Vea Menos | |
| PLIOTEC® HDT12 | Omnova Solutions | PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments....Vea Mas PLIOTEC® HDT12 is a unique styrene acrylic latex that, thanks to a proprietary Hydrophobic Dispersion Technology (HDT), provides an excellent water resistance, thus delivering corrosion protection for metal, even without the use of anticorrosive pigments. PLIOTEC® HDT12 can adhere to ferrous and non ferrous metals, for use on a variety of residential, commercial and industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. Vea Menos | |
| PLIOTEC® HDT16 | Omnova Solutions | PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels...Vea Mas PLIOTEC® HDT16 is a styrene acrylic latex that provides excellent water resistance, adhesion to ferrous and non-ferrous metals and fast hardness development, hence ideally suitable for industrial Direct-To-Metal (DTM) applications, from high gloss enamels to anticorrosive primers. PLIOTEC® HDT16 is also particularly suitable for the formulation of multi-surface renovation paints, for both horizontal and vertical uses, with superior adhesion on a wide variety of substrates including ceramic tiles, PVC, concrete, glass, wood, and PU foam. Vea Menos | |
| PLIOTEC® LEB18 | Omnova Solutions | PLIOTEC® LEB18 is a modified acrylate copolymer designed for high performance exterior masonry coatings, thanks to OMNOVA's Low Exudation Binder technology that ensures superior resistance to exudation (surfactant leaching) and efflorescence. Typical appl...Vea Mas PLIOTEC® LEB18 is a modified acrylate copolymer designed for high performance exterior masonry coatings, thanks to OMNOVA's Low Exudation Binder technology that ensures superior resistance to exudation (surfactant leaching) and efflorescence. Typical applications of this resin include flat and high build (semi-thick, semi-flexible) facade paints, renovation of elastomeric coatings, and top coats for ETICS. Vea Menos | |
| PLIOTEC® LEB20 | Omnova Solutions | PLIOTEC® LEB20 by Omnova Solutions is an unique water-based acrylic resin for exterior masonry paints, topcoats for EIFS and house plinths. Exhibits superior resistance to exudation (surfactant leaching) and efflorescence owing to the LEB (Low Exudation B...Vea Mas PLIOTEC® LEB20 by Omnova Solutions is an unique water-based acrylic resin for exterior masonry paints, topcoats for EIFS and house plinths. Exhibits superior resistance to exudation (surfactant leaching) and efflorescence owing to the LEB (Low Exudation Binder) technology, strong early rain resistance, mud cracking resistance and superior dirt pick-up resistance. It is APEO-free with no added formaldehyde. Pliotec® LEB20 shows outstanding color retention with good adhesion to porous masonry substrates. It has a shelf life of 12 months. Vea Menos | |
| PLIOTEC® PA05 | Omnova Solutions | PLIOTEC® PA05 is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. With very good adhesion to concrete and high Tg, it is ideally suited f...Vea Mas PLIOTEC® PA05 is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. With very good adhesion to concrete and high Tg, it is ideally suited for int/ext floor coatings with superior hot-tire pick up resistance/chemicals resistance. Other end-uses include: tile roof coatings, swimming pool paints or concrete clear coats. Vea Menos | |
| PLIOTEC® PA90MT | Omnova Solutions | PLIOTEC® PA90MT is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA90MT provides excellent water and early moisture resistanc...Vea Mas PLIOTEC® PA90MT is a pure acrylic latex designed for high performance clear and pigmented coatings, with excellent blush resistance, very good exterior weatherability and UV resistance. PLIOTEC® PA90MT provides excellent water and early moisture resistance, and very good adhesion to concrete and masonry. Typical applications include: concrete curing membrane, floor paints, vertical and horizontal clear or pigmented coatings. Vea Menos | |
| PLIOTEC® SA 40 | Omnova Solutions | PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and...Vea Mas PLIOTEC® SA 40 is a carboxylated styrene acrylic dispersion used in coatings with excellent adhesion to concrete, water resistance and pigment binding capability. PLIOTEC® SA 40 resin is particularly suitable for low VOC odorless waterproofing sealers and exterior masonry pigmented primers, providing excellent resistance to alkali and efflorescence, even on fresh concrete or renovation mortars. Vea Menos | |
| PLIOWAY® EC1 | Omnova Solutions | PLIOWAY® EC1 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in low odour dearomatized solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on EC1 form...Vea Mas PLIOWAY® EC1 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in low odour dearomatized solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on EC1 form by solvent evaporation, with low internal tension, making them ideal for rapid renovation of old problematic coatings. Typical applications include: stain blocking, waterproofing, correction fluids, intumescent coatings. Vea Menos | |
| PLIOWAY® ECT | Omnova Solutions | PLIOWAY® ECT is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® ECT forms tension free, tough, ...Vea Mas PLIOWAY® ECT is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® ECT forms tension free, tough, chemically resistant films and, when used alone or with EC1, is ideally suited for a wide variety of end-uses such as stainblocking, waterproofing, thick or textured coatings. Vea Menos | |
| PLIOWAY® Ultra 200 | Omnova Solutions | PLIOWAY® Ultra 200 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ul...Vea Mas PLIOWAY® Ultra 200 is a vinyl acrylate copolymer. This newtonian film forming resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 200 form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: stain blocking, waterproofing, correction fluids, intumescent coatings. Vea Menos | |
| PLIOWAY® Ultra 350LV | Omnova Solutions | PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on...Vea Mas PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 350LV form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: high solids odorless primers, intumescent coatings. Vea Menos | |
| PLIOWAY® Ultra G20 | Omnova Solutions | PLIOWAY® Ultra G20 is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized or isoparaffinic solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® Ultra G2...Vea Mas PLIOWAY® Ultra G20 is a vinyl acrylate copolymer. This thermoplastic resin is a unique film forming rheological resin that, once dissolved in low odour dearomatized or isoparaffinic solvents, develops a gel with a pseudoplastic behavior. PLIOWAY® Ultra G20 forms tension free, tough, chemically resistant films and, when used alone or in combination with Ultra 200 or with Ultra 350LV, is ideally suited for a wide variety of end-uses. Vea Menos | |
| Resipur® 2138 | Omnova Solutions | Resipur® 2138 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include r...Vea Mas Resipur® 2138 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include rigid laminates produced by hand lay-up and SMC (Sheet Moulding Compound). It can be cured at room temperature by means of the addition of an accelerator such as a cobalt and an initiator like a methyl ethyl ketone peroxide - MEKP. In order to obtain an ideal performance, it is recommended that the end product should not be used until 7 days after the cure. Vea Menos | |
| Resipur® 2166 | Omnova Solutions | Resipur® 2166 is an an orthophtalic unsaturated polyester resin of high reactivity, pre-accelerated and thixotropic. It is an opaque pinky liquid, free of impurities. This product is recommended for rigid laminates produced by hand lay-up or spray-up. | |
| Resipur® 2208 | Omnova Solutions | Resipur® 2208 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include g...Vea Mas Resipur® 2208 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include gel coats production. Vea Menos | |
| Resipur® 4200 | Omnova Solutions | Resipur® 4200 is an isophtalic/NPG unsaturated polyester resin of medium reactivity. It has a high chemical resistance, and is ideal for use in gel coat productions. |
