| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...Vea Mas Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...Vea Mas Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...Vea Mas Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...Vea Mas Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...Vea Mas Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...Vea Mas Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. Vea Menos | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...Vea Mas Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. Vea Menos | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...Vea Mas Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. Vea Menos | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...Vea Mas Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. Vea Menos | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...Vea Mas Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. Vea Menos | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...Vea Mas Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. Vea Menos | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...Vea Mas Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). Vea Menos | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...Vea Mas Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). Vea Menos | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...Vea Mas Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. Vea Menos | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...Vea Mas ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). Vea Menos | Request Sample |
| Aspartic Ester Resin Sunaspar SN220 | Suny Chem | La resina de éster aspártico Sunaspar SN220 es una resina de éster aspártico sin solventes amina funcionales utilizada como componente reactivo para poliisocianatos. Se utiliza en adhesivos, revestimientos de superficies anticorrosivos en estructuras de a...Vea Mas La resina de éster aspártico Sunaspar SN220 es una resina de éster aspártico sin solventes amina funcionales utilizada como componente reactivo para poliisocianatos. Se utiliza en adhesivos, revestimientos de superficies anticorrosivos en estructuras de acero, oleoductos, protección anticorrosiva pesada y ligera, revestimiento de burbuja, revestimiento de aspas de ventiladores y materiales impermeabilizantes de hormigón. Vea Menos | |
| Aspartic Ester Resin Sunaspar SN520 | Suny Chem | Sunaspar SN520 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Este producto tiene un alto contenido de sólidos, baja viscosidad y una excelente compatibilidad con la mayoría de las r...Vea Mas Sunaspar SN520 es una resina de éster aspártico sin solventes amina funcional utilizada como componente reactivo para poliisocianatos. Este producto tiene un alto contenido de sólidos, baja viscosidad y una excelente compatibilidad con la mayoría de las resinas de acrilato hidroxi. Ofrece excelentes propiedades de dureza, nivelación y brillo. También presenta buena resistencia a la intemperie, solventes, ácidos y álcalis y agua salina. Este producto es ampliamente utilizado en pinturas anticorrosivas, industriales y de automóviles. Vea Menos | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...Vea Mas CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. Vea Menos | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...Vea Mas CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. Vea Menos | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...Vea Mas CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. Vea Menos | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. Vea Menos | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...Vea Mas CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. Vea Menos | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...Vea Mas CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. Vea Menos | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...Vea Mas CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. Vea Menos | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...Vea Mas CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. Vea Menos | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....Vea Mas CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. Vea Menos | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...Vea Mas CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. Vea Menos | |
| CHS-Epoxy 381 X 90 | Spolchemie | CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...Vea Mas CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. Vea Menos | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...Vea Mas CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...Vea Mas CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. Vea Menos | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...Vea Mas CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 520 X 90 | Spolchemie | CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is...Vea Mas CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is for producing solid paints and manufacture anticorrosive coatings and enamels. Vea Menos | |
| CHS-Epoxy 571 | Spolchemie | CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating mater...Vea Mas CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 572 | Spolchemie | CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating mater...Vea Mas CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 573 | Spolchemie | CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insula...Vea Mas CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 574 | Spolchemie | CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applicatio...Vea Mas CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. Vea Menos | |
| CHS-Epoxy 575 | Spolchemie | CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applicatio...Vea Mas CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. Vea Menos | |
| Disvacryl-1013 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resis...Vea Mas Disvacryl-1013 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in acrylic isocyanate systems for high-performance polyurethane coatings that provide good chemical and corrosion resistance. Vea Menos | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Docure YC-230H | Kukdo Chemical Co., Ltd. | Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...Vea Mas Docure YC-230H of casting resin system is a liquid type medium viscosity Bisphenol-A epoxy resin and medium-viscosity Hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. Vea Menos | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...Vea Mas Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. Vea Menos | |
| Epokukdo KD-211D | Kukdo Chemical Co., Ltd. | Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...Vea Mas Epokukdo KD-211D is a novolac modified solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. Vea Menos | |
| Epokukdo KD-211E | Kukdo Chemical Co., Ltd. | Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good m...Vea Mas Epokukdo KD-211E is a low molecular weight solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain high gloss, flow and good mechanical properties and chemical resistance. Vea Menos | |
| Epokukdo KD-211H | Kukdo Chemical Co., Ltd. | Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...Vea Mas Epokukdo KD-211H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. Vea Menos | |
| Epokukdo KD-213C | Kukdo Chemical Co., Ltd. | Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...Vea Mas Epokukdo KD-213C is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. Vea Menos | |
| Epokukdo KD-213H | Kukdo Chemical Co., Ltd. | Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properti...Vea Mas Epokukdo KD-213H is a novolac modified solid epoxy resin derived from liquid epoxy resin and bisphenol-A. The resin is recommended for the hybrid system in combination with polyester resin or straight epoxy system to obtain good gloss, mechanical properties and excellent corrosion and chemical resistance. Vea Menos | |
| Epokukdo KEM-128-70 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good phys...Vea Mas Epokukdo KEM-128-70 is a 70% solids content emulsion based on bisphenol-A liquid epoxy resin. KEM-128-70 cured in combination with water dispersible hardeners, DOCURE KH-700 or KH-721, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. Vea Menos | |
| Epokukdo KEM-134-60 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-134-60 is a 60% solid content emulsion based on bisphenol-A semisolid epoxy resin. KEM-134-60 cured in combination with water dispersible hardeners, DOCURE KH-721, KH723 or KH-748, exhibits especially good adhesion to most substrates and has ...Vea Mas Epokukdo KEM-134-60 is a 60% solid content emulsion based on bisphenol-A semisolid epoxy resin. KEM-134-60 cured in combination with water dispersible hardeners, DOCURE KH-721, KH723 or KH-748, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. KEM-134-60/DOCURE KH-721,KH-723 or KH-748 waterborne systems have been in used coating areas. Vea Menos | |
| Epokukdo KEM-172-60 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-172-60 is an aqueous epoxy resin emulsion based on a dimer acid modified epoxy resin. KEM-172-60 cured in combination with water dispersible hardeners, Docure KH-723,KH-721 or KH-700, exhibits especially good adhesion to most substrates and h...Vea Mas Epokukdo KEM-172-60 is an aqueous epoxy resin emulsion based on a dimer acid modified epoxy resin. KEM-172-60 cured in combination with water dispersible hardeners, Docure KH-723,KH-721 or KH-700, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance, good flexibility. Vea Menos | |
| Epokukdo KR-692 | Kukdo Chemical Co., Ltd. | Epokukdo KR-692 is a rubber modified epoxy resin specially designed for an acrylic rubber modified solid epoxy resin. KR-692 is recommended for the homogeneous powder coatings which require properties of chemical resistance, anti-corrosive properties and ...Vea Mas Epokukdo KR-692 is a rubber modified epoxy resin specially designed for an acrylic rubber modified solid epoxy resin. KR-692 is recommended for the homogeneous powder coatings which require properties of chemical resistance, anti-corrosive properties and mechanical properties. Therefore this product has an anti-chip resistance, excellent impact strength, break strength, modulus of elasticity, shear and tensile strength, and flexibility without the defect of thermal stability after being cured in straight epoxy system or in hybrid system in combination with the polyester resin. It contains the micronized acrylic rubber core shell particle (0.5µ) to improve toughness of rubber from low to the high temperature. Vea Menos | |
| Epokukdo KR-693 | Kukdo Chemical Co., Ltd. | Epokukdo KR-693 is specially designed for an acrylic rubber modified solid epoxy resin. KR-693 is recommended for the homogeneous powder coatings which require properties of chemical resistance, anti-corrosive properties and mechanical properties. Therefo...Vea Mas Epokukdo KR-693 is specially designed for an acrylic rubber modified solid epoxy resin. KR-693 is recommended for the homogeneous powder coatings which require properties of chemical resistance, anti-corrosive properties and mechanical properties. Therefore this product has an anti-chip resistance, excellent impact strength, break strength, modulus of elasticity, shear and tensile strength, and flexibility without the defect of thermal stability after being cured in straight epoxy system or in hybrid system in combination with the polyester resin. It contains the micronized acrylic rubber core shell particle(0.5µ) to improve toughness of rubber from the low to high temperature. Vea Menos | |
| Epokukdo YD-011S | Kukdo Chemical Co., Ltd. | Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint,...Vea Mas Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint, heavy duty coating, filament winding, laminating, various composite application and so forth. Vea Menos | |
| Epokukdo YD-128 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, alipha...Vea Mas Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128A | Kukdo Chemical Co., Ltd. | Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic poly...Vea Mas Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128A, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128H | Kukdo Chemical Co., Ltd. | Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic poly...Vea Mas Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128H, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128M | Kukdo Chemical Co., Ltd. | Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic poly...Vea Mas Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128M, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128S | Kukdo Chemical Co., Ltd. | Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic...Vea Mas Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128S, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128SH | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic pol...Vea Mas Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SH, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128SM | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic po...Vea Mas Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SM, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-134 | Kukdo Chemical Co., Ltd. | Epokukdo YD-134 is a semisolid epoxy resin for the general adhesives, coatings and moldings industries. YD-134 has good adhesion, excellent mechanical properties and chemical resistance. This product is mainly recommended for anti-corrosive industrial coa...Vea Mas Epokukdo YD-134 is a semisolid epoxy resin for the general adhesives, coatings and moldings industries. YD-134 has good adhesion, excellent mechanical properties and chemical resistance. This product is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, coal tar epoxy and various adhesives. It has high viscosity and has higher EEW, so that it needs less quantity of curatives and accelerators than standard liquid resins such as YD-128. Vea Menos | |
| Epokukdo YD-134L | Kukdo Chemical Co., Ltd. | Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommend...Vea Mas Epokukdo YD-134L is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-134L has good adhesion, excellent mechanical properties and chemical resistance. Because of its excellent properties after curing, YD-134L is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, and various adhesives. YD-134L has higher EEW, so that it needs less quantity of curatives and accelerators than standard liquid resin such as YD -128. Vea Menos | |
| Epokukdo YDF-161 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-161 is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161 is generally used in a...Vea Mas Epokukdo YDF-161 is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161 is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YDF-161H | Kukdo Chemical Co., Ltd. | Epokukdo YDF-161H is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161H is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161H is generally used i...Vea Mas Epokukdo YDF-161H is a non-diluted Bisphenol-A/F type liquid epoxy resin. YDF-161H is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-161H is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YDF-162 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-162 is a non-diluted Bisphenol-A/F type liquid Epoxy Resin. YDF-162 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-162 is generally used in a...Vea Mas Epokukdo YDF-162 is a non-diluted Bisphenol-A/F type liquid Epoxy Resin. YDF-162 is recommended for high solid system or low VOC coating system with excellent mechanical properties and chemical resistance without toxic odor. YDF-162 is generally used in anti-corrosive coating, floor coating, crack injection systems, grouts, adhesives, casting, composite application and many high solids or low VOC industrial coatings. Vea Menos | |
| Epokukdo YDF-165 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-165 is a Bisphenol-F type liquid epoxy resin diluted with BGE , which is very low viscosity. YDF-165 has the excellent mechanical, adhesive, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due ...Vea Mas Epokukdo YDF-165 is a Bisphenol-F type liquid epoxy resin diluted with BGE , which is very low viscosity. YDF-165 has the excellent mechanical, adhesive, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-165 is generally used in coatings, moldings, adhesives, construction and civil works, and composite applications for the low VOC or non-solvent system. Vea Menos | |
| Epokukdo YDF-170 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-170 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-170 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appr...Vea Mas Epokukdo YDF-170 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-170 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-170 is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. Vea Menos | |
| Epokukdo YDF-175 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-175 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appr...Vea Mas Epokukdo YDF-175 is a liquid type epoxy resins derived from BPF and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175 has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-175 is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. YDF-175 is specially designed for non-crystalline type in cold weather. Vea Menos | |
| Epokukdo YDF-175S | Kukdo Chemical Co., Ltd. | Epokukdo YDF-175S is a liquid type epoxy resin derived from Bisphenol-F and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175S has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured ...Vea Mas Epokukdo YDF-175S is a liquid type epoxy resin derived from Bisphenol-F and ECH. Especially, it has low viscosity without diluents or modifiers. YDF-175S has excellent mechanical, adhesion, electrical, and chemical resistance properties after being cured with appropriate curing agents. Due to its special properties, YDF-175S is generally used in coatings, moldings, adhesive, construction and civil works, and composite applications for the low VOC or non-solvent system. YDF-170 is a standard Bisphenol-F type liquid resin and YDF-175S is specially designed for non-crystalline type in cold weather. Vea Menos | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...Vea Mas Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. Vea Menos | |
| Epotec® YD 801 X 75 | Aditya Birla | Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corro...Vea Mas Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corrosive coatings, adhesives, and laminates. Vea Menos | |
| Epotec® YD 901EK-80 | Aditya Birla | Epotec® YD 901EK-80 is an unmodified, standard, medium molecular weight and low softening point epoxy resin in MEK. This product is ideal for use in marine coatings, industrial anti-corrosive & maintenance coatings, and adhesives. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...Vea Mas Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. Vea Menos | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...Vea Mas Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. Vea Menos | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...Vea Mas Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. Vea Menos | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...Vea Mas Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. Vea Menos | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...Vea Mas Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. Vea Menos | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...Vea Mas Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. Vea Menos | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...Vea Mas Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. Vea Menos | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...Vea Mas Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. Vea Menos | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...Vea Mas Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. Vea Menos | |
| HS31-70B | Tianyi Chemical Engineering Material Co., Ltd. | HS31-70B, in the form of a yellowish, viscous liquid, is a soya-oil based long oil alkyd resin that can be used in marine paints, container paints, magnetic paints, and corrosion-resistant coatings. This product contains 70% +/-2% solids. | |
| HS31-70C | Tianyi Chemical Engineering Material Co., Ltd. | HS31-70C, in the form of a yellowish, viscous liquid, is a soya-oil based long oil alkyd resin that can be used in marine paints, container paints, magnetic paints, and corrosion-resistant coatings. This product contains 70% +/-2% solids. | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...Vea Mas Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. Vea Menos | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...Vea Mas Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. Vea Menos | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...Vea Mas Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. Vea Menos | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...Vea Mas Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. Vea Menos | |
| Razeen® SL 4072 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance....Vea Mas Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. Vea Menos | |
| Razeen® SL 4171 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance....Vea Mas Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. Vea Menos | |
| Razeen® SR 5199 | Jubail Chemical Industries Co. | Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enam...Vea Mas Razeen® SR 5199 is a high molecular weight, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact strength, and chemical resistance. Razeen® SR 5199 is used in the formulation of heat-curing primers and enamels as well as anti-corrosive paints. Vea Menos | |
| SETAQUA® 37-1371 | Allnex | SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of rel...Vea Mas SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of relatively low PVC as well as superior adhesion to new galvanized iron. This product is suitable for anti-corrosive coatings, metal maintenance coatings, and galvanized iron primers. Vea Menos | Request Sample |
| SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 40/W es una dispersión no iónica de resina metilfenil polisolaxano producida para revestimientos decorativos resistentes al calor. Tiene la apariencia de un líquido blanco turbio y se destina a revestimientos anticorrosión resistentes a alta...Vea Mas SILIKOPHEN® P 40/W es una dispersión no iónica de resina metilfenil polisolaxano producida para revestimientos decorativos resistentes al calor. Tiene la apariencia de un líquido blanco turbio y se destina a revestimientos anticorrosión resistentes a altas temperaturas para silenciadores, hornos, chimeneas, componentes para horno, parrillas y calefactores eléctricos y a gas. Algunas características especiales de SILIKOPHEN® P 40/W incluyen sus excelentes propiedades de secado al aire, su reductibilidad en agua y la buena compatibilidad con emulsiones polímeras orgánicas. Vea Menos | Request Sample |
| SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 50/X es una resina metilfenil polisiloxana producida para revestimientos anti-corrosión. Tiene una apariencia líquida entre transparente y turbia y se usa para revestimientos anticorrosión de silenciadores, hornos, chimeneas, componentes par...Vea Mas SILIKOPHEN® P 50/X es una resina metilfenil polisiloxana producida para revestimientos anti-corrosión. Tiene una apariencia líquida entre transparente y turbia y se usa para revestimientos anticorrosión de silenciadores, hornos, chimeneas, componentes para horno, parrillas y calefactores eléctricos y a gas. También puede emplearse con pigmentos metálicos y formulaciones especiales para obtener resistencia al calor continuo hasta 650 °C. Algunas características especiales de SILIKOPHEN® P 50/X incluyen buena compatibilidad con resinas orgánicas y buenas propiedades de secado al aire. Vea Menos | Request Sample |
| SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 80/X es un aglutinante a base de solvente para pinturas anti-corrosión resistentes al calor. Tiene una apariencia líquida entre transparente y turbia y se usa para revestimientos anticorrosión de silenciadores, hornos, chimeneas, componentes...Vea Mas SILIKOPHEN® P 80/X es un aglutinante a base de solvente para pinturas anti-corrosión resistentes al calor. Tiene una apariencia líquida entre transparente y turbia y se usa para revestimientos anticorrosión de silenciadores, hornos, chimeneas, componentes para horno, parrillas y calefactores eléctricos y a gas. Algunas características especiales de SILIKOPHEN® P 80/X incluyen excelentes propiedades de secado al aire, buena compatibilidad con resinas orgánicas. También puede emplearse con pigmentos metálicos y formulaciones especiales para obtener resistencia al calor continuo hasta 650 °C. Sin embargo, tiene miscibilidad limitada con hidrocarburos aromáticos. Vea Menos | Request Sample |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | Emulsión copolímero de acrílico del estireno. Se utiliza para acabados en metal, madera, plásticos (PS, ABS). También para las pinturas base anticorrosivas sobre metal, se puede combinar con resinas alquídicas diluibles en agua. | |
| WorléeDur D 6311 (60% In Dearomatized HC 140-165) | Worlée-Chemie G.m.b.H. | Un aceite largo de secado al aire, éster epoxi modificado utilizado para la fabricación de pinturas base especiales anti-corrosión y adhesión. |
