| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...voir plus AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. voir moins | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| CeraSPERSE 171 (Wax Dispersion) | Shamrock Technologies b.v.b.a. | CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommended for use in UV topcoats. | |
| CeraSPERSE 174 (Wax Dispersion) | Shamrock Technologies b.v.b.a. | CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 171 is recommended for UV topcoats. | |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies b.v.b.a. | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...voir plus CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. voir moins | |
| CeraSPERSE 321BG (PTFE / Wax Compound) | Shamrock Technologies b.v.b.a. | CeraSPERSE 321BG is a PTFE (polytetrafluoroethylene) and wax compound in Butyl CARBITOL™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies b.v.b.a. | Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused. | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 421 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 533 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C. | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend. | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting synthetic wax, and carnauba wax blend. This wax blend shows a melting peaks ranging from 84 – 110°C. | |
| FluoroTEX 130 (PTFE Powder) | Shamrock Technologies b.v.b.a. | FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and...voir plus FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. voir moins | |
| FluoroTEX 50 (PTFE Powder) | Shamrock Technologies b.v.b.a. | FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...voir plus FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. voir moins | |
| FluoroTEX 90 (PTFE Powder) | Shamrock Technologies b.v.b.a. | FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...voir plus FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. voir moins | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 145 is an amide wax in a non-ionic aqueous dispersion. Hydrocer 145 is recommended for use in the water-based coating systems. | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies b.v.b.a. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems. | |
| Hydrocer EC 98 | Shamrock Technologies b.v.b.a. | Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...voir plus Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. voir moins | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EE 95 is an anionic, high-density synthetic wax emulsion. Hydrocer EE-95 is used in both air dry and baked coatings. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP-91 is recommened for use in water based coating systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion. Hydrocer ER-77 is used in both air dry and baked coatings. | |
| Hydropel AF (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | Hydropel AF is a micronized EBS (ethylene bisstearamide) wax powder showing multiple melting peaks ranging from 91 – 145°C. | |
| Hydropel GP (Wax Alloy) | Shamrock Technologies b.v.b.a. | Hydropel GP is a wax alloy showing multipile melting peaks ranging from 41 – 101°C. | |
| Hydropel QB (Paraffin / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | Hydropel QB is a paraffin and synthetic wax blend showing melting peaks ranging from 50 – 105°C. | |
| Neptune 1-N1 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings. | |
| Neptune 1-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based, air dry, and baked coatings. | |
| Neptune 5223 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based UV coatings. | |
| NonSKID 5389 (Polypropylene Wax) | Shamrock Technologies b.v.b.a. | NonSKID 5389 is a micronized, modified polypropylene wax. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems. | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 61 is used in baked coatings for powder systems. | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 94 is used in both air dry and baked coatings for solvent and aqueous systems. | |
| S-232-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-232-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommeneded for all clear OPV, water-based, solvent-based, and UV coatings. | |
| S-256-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-256-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 95 – 113°C. . S-256-N1 is recommned in all clear OPV, water-based, solvent-based, and UV coatings. | |
| S-275 (Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | S-275 is a synthetic wax blend that has components showing melting peaks ranging from 83 – 125°C. S-275 is used in both air dry and baked coatings for solvent and aqueous systems. | |
| S-363 (Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. S-363 is recommended for all powder, water-based, solvent-based, powder, and UV systems. | |
| S-379-H (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-379 H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-379-N8 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-379-N8 is a synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-379-N8 is recommended for use in water-based and general purpose industrial coatings. | |
| S-381-N1 (Carnauba / Synthetic Wax Alloy) | Shamrock Technologies b.v.b.a. | S-381-N1 is a carnauba and synthetic micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is also recommened for powder, water-based and UV coating systems. | |
| S-381-N5 (Carnauba / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | S-381-N5 is a carnauba and synthetic micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommened for powder, water-based and UV coating systems. | |
| S-390-C (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-390-C is a spherical synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder. | |
| S-394-MG (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394-MG is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-N1 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394 N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394 N5 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-SD4 (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394-SD4 is a spherical synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-N2 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-395 N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-SP5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-395 SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is recommended for powder, water-based, solvent-based, and UV systems. | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-Q (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, leather, water-based, solvent-based and UV systems. | |
| S-413 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-413 is a synthetic wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for powder coatings, wood coatings, water-based, solvent-based and UV systems | |
| S-483 (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. S-483 is also recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-512 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-512 is a synthetic wax (highly crystalline) powder produced to rigid particle size specifications. S-512 is used in both air dry and baked coatings for solvent and aqueous systems. | |
| S-NAUBA-5021 (Carnauba / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | S-NAUBA-5021 is a carnauba and synthetic wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for powder coatings in all water based and solvent based systems. | |
| SPP-10 (Polypropylene Powder) | Shamrock Technologies b.v.b.a. | SPP-10 is an isotactic polypropylene with a mean particle size of 15 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-25 (Polypropylene Powder) | Shamrock Technologies b.v.b.a. | SPP-25 is an isotactic polypropylene with a mean particle size of 25 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-300 (Polypropylene Powder) | Shamrock Technologies b.v.b.a. | SPP-300 is an isotactic polypropylene with a mean particle size of 290 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SPP-40 (Polypropylene Powder) | Shamrock Technologies b.v.b.a. | SPP-40 is an isotactic polypropylene with a mean particle size of 40 microns. The SPPs are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based coatings. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in powder, water-based, solvent-based and UV coatings. | |
| SST®-2D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in powder, water-based, solvent-based a...voir plus SST®-2D is a low MW PTFE powder (white) with a particle size mean value of 6.0 µm. SST®-2D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-2D is recommended for use in powder, water-based, solvent-based and UV coatings. voir moins | |
| SST®-2P (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-2P is a low MW PTFE powder (Off-white) with a particle size mean value of 8.0 µm. SST®-2P is recommended for use in water-based, solvent-based, powder, and UV coatings. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is also recommened for use in water-based, solvent-based, powder, and UV coatings. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based ...voir plus SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based and UV coatings. voir moins | |
| SST®-3P (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3P is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3P is also recommended for use in powder, water-based, solvent-based, and UV coatings. | |
| SST®-3PS (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3PS is a sintered low MW PTFE powder (charcoal gray colored) with a particle size mean value of 5.0 µm. SST®-3PS is recommeneded for use in powder, water-based, solvent-based, and UV coatings. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in powder, water-based, solvent-based and UV coatings. | |
| SST®-4MG (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. . SST®-4MG is recommened for use in water-based, solvent-based, powd...voir plus SST®-4MG is a low MW PTFE powder (white) with a particle size mean value of 2.5 µm. SST®-4MG has a tightly controlled particle size distribution, resulting in fewer oversized particles. . SST®-4MG is recommened for use in water-based, solvent-based, powder, and UV systems. voir moins | |
| SST®-4P (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-4P is a low MW PTFE powder (white) with a particle size mean value of 3.0 µm. SST®-4P is recommended for use in powder, water-based, solvent-based, and UV coatings. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. | |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...voir plus SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. voir moins | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6030 is a vross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in UV coatings. | |
| Texture 5374W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...voir plus Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5378W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5378W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 35 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...voir plus Texture 5378W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 35 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5380W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5380W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 50 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...voir plus Texture 5380W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 50 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5382W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5382W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 65 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...voir plus Texture 5382W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 65 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5384W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5384W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 80 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...voir plus Texture 5384W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 80 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5386W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5386W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 110 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used i...voir plus Texture 5386W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 110 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture 5388W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5388W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 150 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used i...voir plus Texture 5388W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 150 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| Texture Ultrafine (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture Ultrafine is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 165 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be us...voir plus Texture Ultrafine is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 165 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. voir moins | |
| UltraMATTE UV 50 GDA (Synthetic Wax / Silica Dispersion) | Shamrock Technologies b.v.b.a. | UltraMatte UV 50GDA is a synthetic wax-silica dispersion in TRPGDA monomer. UltraMATTE UV 50 GDA is used in the UV coatings industry. It is recommended for matte, semi-matte, and satin effect in UV OPV. |
