| ACRESIN® A 204 UV | BASF Dispersions & Resins | acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...voir plus acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...voir plus acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. voir moins | |
| ACRONAL® 3630 | BASF Dispersions & Resins | Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...voir plus Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. voir moins | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...voir plus Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. voir moins | |
| ACRONAL® 3636 X | BASF Dispersions & Resins | Acronal® 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® 4 D | BASF Dispersions & Resins | Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4034 | BASF Dispersions & Resins | Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...voir plus Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. voir moins | |
| ACRONAL® A 110 | BASF Dispersions & Resins | Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins | |
| ACRONAL® A 145 | BASF Dispersions & Resins | Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 245 | BASF Dispersions & Resins | Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4021 | BASF Dispersions & Resins | Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
| LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| STYROFAN® NX 6690 X | BASF Dispersions & Resins | Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is ...voir plus Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is a low odor and an ammonia free dispersion. voir moins | |
| STYRONAL® ND 430 | BASF Dispersions & Resins | Styronal® ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adh...voir plus Styronal® ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adhesion and serves as the base for foil to kraft wet laminating adhesives in conjunction with casein. voir moins | |
| STYRONAL® ND 811 | BASF Dispersions & Resins | Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness....voir plus Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness. Styronal® ND 811 may also be used as a glossing additive for both paper and paperboard coatings. voir moins | |
| STYRONAL® NX 4222 X | BASF Dispersions & Resins | Styronal® NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain Styronal® NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neu...voir plus Styronal® NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain Styronal® NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neutral range. The suitability of such additives must be verified and monitored in trials. voir moins | |
| TIB KAT® 129 | TIB Chemicals | TIB KAT® 129 is a liquid catalyst that distributes well in reactants. It is used for esterifications in oleochemistry, catalysis or polyurethane systems, curing of silicone resins and silanes and for polymerisation of lactones to biodegradable polymers. | |
| TIB KAT® 160 | TIB Chemicals | TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). T...voir plus TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). This product also enables the production of light-coloured esters. Secondary reactions do hardly occur in comparison to acidic catalysts. voir moins | |
| TIB KAT® 162 | TIB Chemicals | TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the...voir plus TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the esterification process, it minimises the dehydration of alcohols and avoids odours and discolouration of the products which can be formed by possible by- products. voir moins | |
| TIB KAT® 188 | TIB Chemicals | TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows th...voir plus TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows the highest catalytic activity at reaction temperatures between 180 - 260°C. voir moins | |
| TIB KAT® 208 | TIB Chemicals | TIB KAT® 208 is a liquid organotin catalyst dissolved in a special solvent. It is advantageous for the production of coatings based on polyurethanes and is suitable for the condensation of silicones. | |
| TIB KAT® 214 | TIB Chemicals | TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytica...voir plus TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytical reactivity of this product in polyurethane systems is in most cases higher than DBTL (TIB KAT® 218), resulting in shorter pot life and quicker curing times. The use in water-based systems is possible within certain limits. voir moins | |
| TIB KAT® 216 | TIB Chemicals | TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabil...voir plus TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabilizer for PVC. voir moins | |
| TIB KAT® 217 | TIB Chemicals | TIB KAT® 217 is a liquid catalyst based on a dioctyltinoxide formulation. It can be applied for the curing of silicones and silane systems. | |
| TIB KAT® 218 | TIB Chemicals | TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectur...voir plus TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectural, and other industrial coatings; and for 1p/2p adhesives and sealants.. voir moins | |
| TIB KAT® 220 | TIB Chemicals | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | |
| TIB KAT® 223 | TIB Chemicals | TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyu...voir plus TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyurethane-systems. TIB KAT® 223 shows a lower toxic potential compared to Dibutyltin catalysts and can replace these. voir moins | |
| TIB KAT® 225 | TIB Chemicals | TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive ...voir plus TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive to moisture than other types of DBTL. voir moins | |
| TIB KAT® 226 | TIB Chemicals | TIB KAT® 226 is a catalyst for the synthesis of polyurethane systems, polycondensation reactions of RTV silicon resins and silanes and for 1 K MS silyl systems. It is miscible with organic solvents, but sensitive to moisture and frost. | |
| TIB KAT® 226 V80 | TIB Chemicals | TIB KAT® 226 V80 can be used as a catalyst for 1 K MS Silyl systems, polycondensation reactions of RTV silicon resins and silanes, and synthesis of polyurethan-systems. This product is delivered in liquid form and is miscible with organic solvents, but is...voir plus TIB KAT® 226 V80 can be used as a catalyst for 1 K MS Silyl systems, polycondensation reactions of RTV silicon resins and silanes, and synthesis of polyurethan-systems. This product is delivered in liquid form and is miscible with organic solvents, but is sensitive to moisture. voir moins | |
| TIB KAT® 229 | TIB Chemicals | TIB KAT® 229 is suitable to replace TIB KAT 223 and as a catalyst for synthesis of polyuretane-systems, transesterification, polycondensation reactions of RTV silicon resins and silanes, and production of raw materials for polycarbonates. This product is ...voir plus TIB KAT® 229 is suitable to replace TIB KAT 223 and as a catalyst for synthesis of polyuretane-systems, transesterification, polycondensation reactions of RTV silicon resins and silanes, and production of raw materials for polycarbonates. This product is slightly sensitive to moisture. voir moins | |
| TIB KAT® 232 | TIB Chemicals | TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration rangin...voir plus TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration ranging from 0.01 - 0.5%wt. depending on the application. voir moins | |
| TIB KAT® 233 | TIB Chemicals | TIB KAT® 233 is a catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions and for the production of raw material for polycarbonates. This product has a tin content of 32.5-34.0%. | |
| TIB KAT® 233S | TIB Chemicals | TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and i...voir plus TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and is slightly sensitive to moisture. voir moins | |
| TIB KAT® 248 | TIB Chemicals | TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-depos...voir plus TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-deposition paint. This product is also suitable for the transesterification of vinyl acetate or acrylic acid copolymers. voir moins | |
| TIB KAT® 248 LC | TIB Chemicals | TIB KAT® 248 LC is a solid, amorphous catalyst which is used in esterification, transesterification and polycondensation reactions. It is also suitable for the manufacturing of polyester resins and electrodeposition paints. | |
| TIB KAT® 250 | TIB Chemicals | TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in...voir plus TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in production of alkyd resins. voir moins | |
| TIB KAT® 251 | TIB Chemicals | TIB KAT® 251 is a solid, white catalyst that is excellent for esterification, transesterification and polycondensation reactions in the production of alkyd resins, polyester resins and oleochemical resins. | |
| TIB KAT® 256 | TIB Chemicals | TIB KAT® 256 is a solid catalyst that is used in esterification, transesterification and polycondensation reactions. It gives good results in the production of polyesters and alkyds. This product is practically insoluble in water and organic solvents. | |
| TIB KAT® 318 | TIB Chemicals | TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. ...voir plus TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations. voir moins | |
| TIB KAT® 417 | TIB Chemicals | TIB KAT® 417 is a liquid catalyst based on a dioctyltinoxide formulation. This product can be applied for the curing of silicones and silane systems. | |
| TIB KAT® 424 | TIB Chemicals | TIB KAT® 424 is a liquid catalyst based on an DBT-softener compound that can be applied for the curing of silicones and silane systems, especially for 1p MS silyl polymer. It is sensitive to hydrolysis, so contact with moisture must be minimized. | |
| TIB KAT® 616 | TIB Chemicals | TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevate...voir plus TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevated temperatures and in curing systems based on aromatic isocyanates. voir moins | |
| TIB KAT® 620 | TIB Chemicals | TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this produc...voir plus TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this product is greater than or equal to 19.0%. voir moins | |
| TIB KAT® 623 | TIB Chemicals | TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers. | |
| TIB KAT® 635 | TIB Chemicals | TIB KAT® 635 is a solid zinc based catalyst which is used for numerous applications. It is suitable as a raw material for wood treatment formulation and as a condensation catalyst for polyester resins. | |
| TIB KAT® 716 | TIB Chemicals | TIB KAT® 716 is a slightly yellow, liquid catalyst based on bismuth, which shows exceptional catalytical activity. It is suitable for polyurethane systems for automotive, industrial or car refinishing systems. | |
| TIB KAT® 718 | TIB Chemicals | TIB KAT® 718 is a liquid catalyst based on a blend of special metal carboxylates. The product is suitable to replace dibutyltin dilaurate in certain polyurethane systems. It is especially suitable for curing reactions at elevated temperatures. | |
| TIB KAT® 720 | TIB Chemicals | TIB KAT® 720 is a bismuth based catalyst that can be used for catalysis of polyurethane systems. It can be dissolved in common solvents for PU systems, but it is recommended to test the solution stability carefully. | |
| TIB KAT® 808 | TIB Chemicals | TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insolub...voir plus TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insoluble in water. voir moins | |
| TIB KAT® 812 | TIB Chemicals | TIB KAT® 812 can be used as a primary drier, commonly in combination with auxiliary driers and promotes polymerisation and through drying. It is especially suitable for coatings dried at low temperature and high humidity. | |
| TIB KAT® 815 | TIB Chemicals | TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%...voir plus TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%. voir moins | |
| TIB KAT® HES 70 | TIB Chemicals | TIB KAT® HES 70 is a catalyst for esterification reactions. It is especially suitable due to its low volatility at high temperatures and high vacuum. This product is miscible in water at all concentrations and is practically odorless. | |
| TIB KAT® K15 | TIB Chemicals | TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It...voir plus TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It shows high compatibility and miscibility with low polar reaction partners due to its special composition. voir moins | |
| TIB KAT® MP | TIB Chemicals | TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA...voir plus TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA. voir moins | |
| TIB KAT® MSA 70 | TIB Chemicals | TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale ...voir plus TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale yellow liquid, so it is possible to achieve products with light colors. voir moins | |
| TIB KAT® MSA 99 | TIB Chemicals | TIB KAT® MSA 99 is a methanesulfonic acid that can be used in the chemical industry as a catalyst and additive and in the electroplating industry as a plating bath additive. It is miscible in water at all concentrations. | |
| TIB KAT® P 216 | TIB Chemicals | TIB KAT® P 216 is a dry blend version of TIB KAT 216 on a special silica carrier. This product is supplied as a white, light, free flowing powder without any tackiness. It may be important to note that this product is sensitive to frost. | |
| TIB KAT® S 70 | TIB Chemicals | TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst...voir plus TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst for esterification reactions. voir moins | |
| TIB KAT® SP | TIB Chemicals | TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly light...voir plus TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly lighter colour values than using pure methane sulfonic acid, other sulfonic acids or sulfuric acid. voir moins |
