| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...voir plus Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...voir plus Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Silanes | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Silanes | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Silanes | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| TIB KAT® 129 | TIB Chemicals | TIB KAT® 129 is a liquid catalyst that distributes well in reactants. It is used for esterifications in oleochemistry, catalysis or polyurethane systems, curing of silicone resins and silanes and for polymerisation of lactones to biodegradable polymers. | |
| TIB KAT® 160 | TIB Chemicals | TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). T...voir plus TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). This product also enables the production of light-coloured esters. Secondary reactions do hardly occur in comparison to acidic catalysts. voir moins | |
| TIB KAT® 162 | TIB Chemicals | TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the...voir plus TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the esterification process, it minimises the dehydration of alcohols and avoids odours and discolouration of the products which can be formed by possible by- products. voir moins | |
| TIB KAT® 188 | TIB Chemicals | TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows th...voir plus TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows the highest catalytic activity at reaction temperatures between 180 - 260°C. voir moins | |
| TIB KAT® 208 | TIB Chemicals | TIB KAT® 208 is a liquid organotin catalyst dissolved in a special solvent. It is advantageous for the production of coatings based on polyurethanes and is suitable for the condensation of silicones. | |
| TIB KAT® 214 | TIB Chemicals | TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytica...voir plus TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytical reactivity of this product in polyurethane systems is in most cases higher than DBTL (TIB KAT® 218), resulting in shorter pot life and quicker curing times. The use in water-based systems is possible within certain limits. voir moins | |
| TIB KAT® 216 | TIB Chemicals | TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabil...voir plus TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabilizer for PVC. voir moins | |
| TIB KAT® 217 | TIB Chemicals | TIB KAT® 217 is a liquid catalyst based on a dioctyltinoxide formulation. It can be applied for the curing of silicones and silane systems. | |
| TIB KAT® 218 | TIB Chemicals | TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectur...voir plus TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectural, and other industrial coatings; and for 1p/2p adhesives and sealants.. voir moins | |
| TIB KAT® 220 | TIB Chemicals | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | |
| TIB KAT® 223 | TIB Chemicals | TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyu...voir plus TIB KAT® 223 is a liquid Dioctyltin based catalyst, which has been developed especially for 1K MS silyl systems. It is also suitable for polycondensation reactions of RTV silicone resins and silane terminated polymers as well as for the synthesis of Polyurethane-systems. TIB KAT® 223 shows a lower toxic potential compared to Dibutyltin catalysts and can replace these. voir moins | |
| TIB KAT® 225 | TIB Chemicals | TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive ...voir plus TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive to moisture than other types of DBTL. voir moins | |
| TIB KAT® 226 | TIB Chemicals | TIB KAT® 226 is a catalyst for the synthesis of polyurethane systems, polycondensation reactions of RTV silicon resins and silanes and for 1 K MS silyl systems. It is miscible with organic solvents, but sensitive to moisture and frost. | |
| TIB KAT® 226 V80 | TIB Chemicals | TIB KAT® 226 V80 can be used as a catalyst for 1 K MS Silyl systems, polycondensation reactions of RTV silicon resins and silanes, and synthesis of polyurethan-systems. This product is delivered in liquid form and is miscible with organic solvents, but is...voir plus TIB KAT® 226 V80 can be used as a catalyst for 1 K MS Silyl systems, polycondensation reactions of RTV silicon resins and silanes, and synthesis of polyurethan-systems. This product is delivered in liquid form and is miscible with organic solvents, but is sensitive to moisture. voir moins | |
| TIB KAT® 229 | TIB Chemicals | TIB KAT® 229 is suitable to replace TIB KAT 223 and as a catalyst for synthesis of polyuretane-systems, transesterification, polycondensation reactions of RTV silicon resins and silanes, and production of raw materials for polycarbonates. This product is ...voir plus TIB KAT® 229 is suitable to replace TIB KAT 223 and as a catalyst for synthesis of polyuretane-systems, transesterification, polycondensation reactions of RTV silicon resins and silanes, and production of raw materials for polycarbonates. This product is slightly sensitive to moisture. voir moins | |
| TIB KAT® 232 | TIB Chemicals | TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration rangin...voir plus TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration ranging from 0.01 - 0.5%wt. depending on the application. voir moins | |
| TIB KAT® 233 | TIB Chemicals | TIB KAT® 233 is a catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions and for the production of raw material for polycarbonates. This product has a tin content of 32.5-34.0%. | |
| TIB KAT® 233S | TIB Chemicals | TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and i...voir plus TIB KAT® 233S is applicable for catalysts in the manufacturing of polyurethanes, transesterification reactions, condensation reactions of RTV-silicone resins and silanes, and transesterification of polyacrylates. This product is supplied as a liquid and is slightly sensitive to moisture. voir moins | |
| TIB KAT® 248 | TIB Chemicals | TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-depos...voir plus TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-deposition paint. This product is also suitable for the transesterification of vinyl acetate or acrylic acid copolymers. voir moins | |
| TIB KAT® 248 LC | TIB Chemicals | TIB KAT® 248 LC is a solid, amorphous catalyst which is used in esterification, transesterification and polycondensation reactions. It is also suitable for the manufacturing of polyester resins and electrodeposition paints. | |
| TIB KAT® 250 | TIB Chemicals | TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in...voir plus TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in production of alkyd resins. voir moins | |
| TIB KAT® 251 | TIB Chemicals | TIB KAT® 251 is a solid, white catalyst that is excellent for esterification, transesterification and polycondensation reactions in the production of alkyd resins, polyester resins and oleochemical resins. | |
| TIB KAT® 256 | TIB Chemicals | TIB KAT® 256 is a solid catalyst that is used in esterification, transesterification and polycondensation reactions. It gives good results in the production of polyesters and alkyds. This product is practically insoluble in water and organic solvents. | |
| TIB KAT® 318 | TIB Chemicals | TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. ...voir plus TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations. voir moins | |
| TIB KAT® 417 | TIB Chemicals | TIB KAT® 417 is a liquid catalyst based on a dioctyltinoxide formulation. This product can be applied for the curing of silicones and silane systems. | |
| TIB KAT® 424 | TIB Chemicals | TIB KAT® 424 is a liquid catalyst based on an DBT-softener compound that can be applied for the curing of silicones and silane systems, especially for 1p MS silyl polymer. It is sensitive to hydrolysis, so contact with moisture must be minimized. | |
| TIB KAT® 616 | TIB Chemicals | TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevate...voir plus TIB KAT® 616 is suitable for various applications in the catalysis of polyurethane systems. Compared to organotin catalysts, this product shows a lower activity offering longer pot life in 2p systems. It is especially useful in curing reactions at elevated temperatures and in curing systems based on aromatic isocyanates. voir moins | |
| TIB KAT® 620 | TIB Chemicals | TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this produc...voir plus TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this product is greater than or equal to 19.0%. voir moins | |
| TIB KAT® 623 | TIB Chemicals | TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers. | |
| TIB KAT® 635 | TIB Chemicals | TIB KAT® 635 is a solid zinc based catalyst which is used for numerous applications. It is suitable as a raw material for wood treatment formulation and as a condensation catalyst for polyester resins. | |
| TIB KAT® 716 | TIB Chemicals | TIB KAT® 716 is a slightly yellow, liquid catalyst based on bismuth, which shows exceptional catalytical activity. It is suitable for polyurethane systems for automotive, industrial or car refinishing systems. | |
| TIB KAT® 718 | TIB Chemicals | TIB KAT® 718 is a liquid catalyst based on a blend of special metal carboxylates. The product is suitable to replace dibutyltin dilaurate in certain polyurethane systems. It is especially suitable for curing reactions at elevated temperatures. | |
| TIB KAT® 720 | TIB Chemicals | TIB KAT® 720 is a bismuth based catalyst that can be used for catalysis of polyurethane systems. It can be dissolved in common solvents for PU systems, but it is recommended to test the solution stability carefully. | |
| TIB KAT® 808 | TIB Chemicals | TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insolub...voir plus TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insoluble in water. voir moins | |
| TIB KAT® 812 | TIB Chemicals | TIB KAT® 812 can be used as a primary drier, commonly in combination with auxiliary driers and promotes polymerisation and through drying. It is especially suitable for coatings dried at low temperature and high humidity. | |
| TIB KAT® 815 | TIB Chemicals | TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%...voir plus TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%. voir moins | |
| TIB KAT® HES 70 | TIB Chemicals | TIB KAT® HES 70 is a catalyst for esterification reactions. It is especially suitable due to its low volatility at high temperatures and high vacuum. This product is miscible in water at all concentrations and is practically odorless. | |
| TIB KAT® K15 | TIB Chemicals | TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It...voir plus TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It shows high compatibility and miscibility with low polar reaction partners due to its special composition. voir moins | |
| TIB KAT® MP | TIB Chemicals | TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA...voir plus TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA. voir moins | |
| TIB KAT® MSA 70 | TIB Chemicals | TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale ...voir plus TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale yellow liquid, so it is possible to achieve products with light colors. voir moins | |
| TIB KAT® MSA 99 | TIB Chemicals | TIB KAT® MSA 99 is a methanesulfonic acid that can be used in the chemical industry as a catalyst and additive and in the electroplating industry as a plating bath additive. It is miscible in water at all concentrations. | |
| TIB KAT® P 216 | TIB Chemicals | TIB KAT® P 216 is a dry blend version of TIB KAT 216 on a special silica carrier. This product is supplied as a white, light, free flowing powder without any tackiness. It may be important to note that this product is sensitive to frost. | |
| TIB KAT® S 70 | TIB Chemicals | TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst...voir plus TIB KAT® S 70 is a 70% clear, aqueous solution of sulphosuccinic acid. It shows high stability against thermal and oxidative decomposition. As a result of its high acidic strength combined with a low molecular weight, this product is an excellent catalyst for esterification reactions. voir moins | |
| TIB KAT® SP | TIB Chemicals | TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly light...voir plus TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly lighter colour values than using pure methane sulfonic acid, other sulfonic acids or sulfuric acid. voir moins | |
| VPS SIVO 260 | Evonik Operations GmbH, BL Silanes | VPS SIVO 260 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reaction...voir plus VPS SIVO 260 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reactions with ketones or ester solvents. Helps eliminate the need for special primers in numerous bonding applications. Exhibits excellent wetting on substrates and forms weather- and moisture-resistant bonds to substrates which are partially difficult to adhere, well balanced mechanical properties and significant VOC-reduction compared to conventional amino silanes. Suitable for use in adhesive and sealants, silane modified polyurethane/ polyether, RTV-1/RTV-2 silicones, butyl rubber and improved adhesion especially to polycarbonate. Recommended dosage for VPS SIVO 260 is 0-5-2.0 wt. %. It has a shelf life of 9 months. voir moins | |
| VPS SIVO 280 | Evonik Operations GmbH, BL Silanes | VPS SIVO 280 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reaction...voir plus VPS SIVO 280 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reactions with ketones or ester solvents. Helps eliminate the need for special primers in numerous bonding applications. Exhibits excellent wetting on substrates and forms weather- and moisture-resistant bonds to substrates which are partially difficult to adhere, well balanced mechanical properties and significant VOC-reduction compared to conventional amino silanes. Suitable for use in adhesive and sealants, silane modified polyurethane/ polyether, RTV-1/RTV-2 silicones, butyl rubber and improved adhesion especially to PMMA. Recommended dosage for VPS SIVO 260 is 0-5-2.0 wt. %. It has a shelf life of 9 months. voir moins |
