Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...voir plus
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. voir moins
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...voir plus
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. voir moins
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...voir plus
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. voir moins
YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters.
YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins.
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...voir plus
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. voir moins
YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins.
YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...voir plus
YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. voir moins
High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high mole...voir plus
High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC adhesives, bond metal materials. and can be used as an adhesive in the fiber industry. voir moins
YURON HPE 2200 is a high performance high chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to produce high grade adhesives.
MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus
MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins
MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus
MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins
MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus
MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins
MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus
MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins
MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus
MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins
MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C.
MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C.
MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus
MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins
MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus
MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins
MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus
MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins
MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus
MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Désolé mais l'industrie que vous avez sélectionnée n'est pas disponible actuellement dans votre langue. Vous pouvez choisir une des langues ci-dessous pour sélectionner l'industrie ou sinon fermer cette fenêtre.
