| AQUA CALK TWB | Sumitomo Seika America, Inc. | AQUA CALK TWB is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB is nonionic, its water absorption capacity does n...voir plus AQUA CALK TWB is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB is nonionic, its water absorption capacity does not change whether it is pure water or an electrolyte aqueous solution, and it can absorb acid and alkaline aqueous solutions. In addition, this product can be processed with heat and can be easily blended with resins and rubbers. voir moins | |
| AQUA CALK TWB-P | Sumitomo Seika America, Inc. | AQUA CALK TWB-P is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB-P is nonionic, its water absorption capacity do...voir plus AQUA CALK TWB-P is a nonionic polyalkylene oxide water-absorbing polymer with thermoplasticity and many features not found in conventional polyacrylic acid-based water-absorbing polymers. Since AQUA CALK TWB-P is nonionic, its water absorption capacity does not change whether it is pure water or an electrolyte aqueous solution, and it can absorb acid and alkaline aqueous solutions. In addition, this product can be processed with heat and can be easily blended with resins and rubbers. voir moins | |
| AQUPAANA AP-40F | Sumitomo Seika America, Inc. | AQUPAANA AP-40F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-40F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50 | Sumitomo Seika America, Inc. | AQUPAANA AP-50 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50F | Sumitomo Seika America, Inc. | AQUPAANA AP-50F is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50F has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-50M | Sumitomo Seika America, Inc. | AQUPAANA AP-50M is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-50M has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| AQUPAANA AP-70 | Sumitomo Seika America, Inc. | AQUPAANA AP-70 is a partially neutralized polyacrylate, a water-soluble polymer. AQUPAANA AP-70 has a spherical shape and good fluidity and is used as a rheology control and texture modifier. | |
| FLO-THENE UF1.5N | Sumitomo Seika America, Inc. | FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no add...voir plus FLO-THENE UF1.5N is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF1.5N retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF20S | Sumitomo Seika America, Inc. | FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no addit...voir plus FLO-THENE UF20S is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF20S retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF4 | Sumitomo Seika America, Inc. | FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives...voir plus FLO-THENE UF4 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF4 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| FLO-THENE UF80 | Sumitomo Seika America, Inc. | FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additiv...voir plus FLO-THENE UF80 is a fine powder with a medium particle size of about 20 µm and is an extremely stable product with little variation in particle size from Lot to Lot. FLO-THENE UF80 retains the excellent properties of polyethylene as it contains no additives in our manufacturing process. This product is used as an additive for various compounds, as an adhesive, as a dispersant, etc. voir moins | |
| HEC AG-15F | Sumitomo Seika America, Inc. | HEC AG-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AG-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AG-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AG-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AH-15 | Sumitomo Seika America, Inc. | HEC AH-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AH-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AH-15F | Sumitomo Seika America, Inc. | HEC AH-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AH-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AH-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AL-15 | Sumitomo Seika America, Inc. | HEC AL-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AL-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AL-15F | Sumitomo Seika America, Inc. | HEC AL-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AL-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AL-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AV-15F | Sumitomo Seika America, Inc. | HEC AV-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AV-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AV-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AV-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AW-15F | Sumitomo Seika America, Inc. | HEC AW-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AW-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC AW-15F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AW-15F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC AX-15 | Sumitomo Seika America, Inc. | HEC AX-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AX-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has ...voir plus HEC AX-15 is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC AX-15 is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC SW-25F | Sumitomo Seika America, Inc. | HEC SW-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SW-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC SW-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SW-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| HEC SZ-25F | Sumitomo Seika America, Inc. | HEC SZ-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SZ-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC ha...voir plus HEC SZ-25F is a water-soluble polymer produced by adding ethylene oxide to cellulose. HEC SZ-25F is derived from cellulose and is nonionic, so it is used in a wide range of fields such as industrial, personal care, household, and electronic fields. HEC has many grades, and the grades are divided according to solubility and impurity specifications. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| PEO-1 | Sumitomo Seika America, Inc. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-15 | Sumitomo Seika America, Inc. | PEO-15 is a nonionic water-soluble thermoplastic polymer. PEO-15 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-18 | Sumitomo Seika America, Inc. | PEO-18 is a nonionic water-soluble thermoplastic polymer. PEO-18 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika America, Inc. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-27 | Sumitomo Seika America, Inc. | PEO-27 is a nonionic water-soluble thermoplastic polymer. PEO-27 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-29 | Sumitomo Seika America, Inc. | PEO-29 is a nonionic water-soluble thermoplastic polymer. PEO-29 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika America, Inc. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika America, Inc. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika America, Inc. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| SEPOLEX CSM-N | Sumitomo Seika America, Inc. | SEPOLEX CSM-N is a latex of CSM rubber (CHLOROSULFONATED POLYETHYLENE LATEX) with excellent heat resistance, durability, and chemical resistance. SEPOLEX CSM-N has excellent adhesion to rubber and textiles and is used in a wide range of applications. | |
| SEPOLSION G515 | Sumitomo Seika America, Inc. | SEPOLSION G515 is a water-based emulsion of olefin polymer copolymerized with ethylene and glycidyl methacrylate. SEPOLSION G515 shows excellent adhesion to various substrates (glass, paper, plastic, metal, etc.) due to its highly reactive epoxy group. | |
| SEPOLSION PA150 | Sumitomo Seika America, Inc. | SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating ...voir plus SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating agents, and improvement additives. voir moins | |
| SEPOLSION PA200 | Sumitomo Seika America, Inc. | SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agen...voir plus SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agents, and improvement additives. voir moins | |
| SPHERICAL POWDER CL-2080 | Sumitomo Seika America, Inc. | SPHERICAL POWDER CL-2080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of ...voir plus SPHERICAL POWDER CL-2080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER EA-209 | Sumitomo Seika America, Inc. | SPHERICAL POWDER EA-209 is spherical polyethylene powder (Ethylene acrylic acid copolymer). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide ran...voir plus SPHERICAL POWDER EA-209 is spherical polyethylene powder (Ethylene acrylic acid copolymer). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER HE-3040 | Sumitomo Seika America, Inc. | SPHERICAL POWDER HE-3040 is spherical polyethylene powder (High-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of...voir plus SPHERICAL POWDER HE-3040 is spherical polyethylene powder (High-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SPHERICAL POWDER LE-1080 | Sumitomo Seika America, Inc. | SPHERICAL POWDER LE-1080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of...voir plus SPHERICAL POWDER LE-1080 is spherical polyethylene powder (Low-Density Polyethylene). Since this product has a spherical shape, it has good fluidity and dispersibility and shows excellent properties as a lubricant. This product is used in a wide range of applications including personal care and industrial use. voir moins | |
| SULFOLANE Anhydrous Grade | Sumitomo Seika America, Inc. | SULFOLANE Anhydrous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Anhydrous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic sol...voir plus SULFOLANE Anhydrous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Anhydrous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| SULFOLANE Aqueous Grade | Sumitomo Seika America, Inc. | SULFOLANE Aqueous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Aqueous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solutio...voir plus SULFOLANE Aqueous Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Aqueous Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| SULFOLANE Super Grade | Sumitomo Seika America, Inc. | SULFOLANE Super Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Super Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution fo...voir plus SULFOLANE Super Grade is a polar solvent with a boiling point of 200℃/392℉ or higher and high thermal stability. SULFOLANE Super Grade can be used as BTX extraction solvent, reaction solvent, cleaning agent for semiconductors, and electrolytic solution for capacitors and secondary batteries. voir moins | |
| ZAIKTHENE A | Sumitomo Seika America, Inc. | ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE A is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE A shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE AC | Sumitomo Seika America, Inc. | ZAIKTHENE AC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has ex...voir plus ZAIKTHENE AC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE AC-HW-10 | Sumitomo Seika America, Inc. | ZAIKTHENE AC-HW-10 is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC-HW-10 shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass...voir plus ZAIKTHENE AC-HW-10 is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE AC-HW-10 shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE L | Sumitomo Seika America, Inc. | ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE L is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE L shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE N | Sumitomo Seika America, Inc. | ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has exce...voir plus ZAIKTHENE N is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE N shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins | |
| ZAIKTHENE NC | Sumitomo Seika America, Inc. | ZAIKTHENE NC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE NC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has ex...voir plus ZAIKTHENE NC is an aqueous dispersion free of organic solvents and surfactants. ZAIKTHENE NC shows excellent adhesiveness to various substrates such as paper, non-woven fabrics, metals (especially aluminum), plastics (various films), and glass, and has excellent water resistance, chemical resistance, and transparency. ZAIKTHENE series has many grades with different neutralizing agents and solid content. voir moins |
