Ethyl Acrylate is a clear, colorless liquid with a pungent odor. This product has a molecular weight of 100.13. Ethyl Acrylate is used in the production of coatings, elastomers, adhesives, thickeners, superabsorbents, acrylic esters, and fiber sizing.
Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...voir plus
Hycat™ 2000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. voir moins
Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These...voir plus
Hycat™ 3000S is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ 3000S has additional cure-system modifiers that improves the solubility characteristics in difficult epoxy-anhydride formulas resulting in uniform cures. voir moins
Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeri...voir plus
Hycat™ AC-4 is a liquid epoxy catalyst whose performance is similar to Hycat™ 3100S but, on average, has slightly faster gel times while providing a more even distribution of the heat evolved from a polymer reaction. It accelerates materials with monomeric, dimeric or polymeric functional groups and will perform very well in the presence of a number of popular additives and toughening agents. It is recommended for use in epoxy/anhydride formulations. voir moins
Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds ...voir plus
Hycat™ AO-4 is a colorless liquid epoxy catalyst used to accelerate the reaction of epoxy resins with various anhydrides. It is easy to handle, load, and adjust and can be readily cleaned up with typical organic solvents or degreasers. By using compounds with monomeric, dimeric or poly functional groups, the degree of cross-linking and therefore the mechanical properties of the resulting product can be advantageously modified. It is recommended for use in epoxy/anhydride formulations. voir moins
Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These ca...voir plus
Hycat™ OA is a Chromium III compound based on an activated (DTCS Proprietary Process) oxo-centered-trinuclear [chromium III] complex. It is commonly used to accelerate the reaction of epoxy compounds with carboxylic acids, anhydrides and imides. These catalysts are especially effective in polymer cure systems at room temperature or slightly elevated temperatures and are useful in coatings, electronic circuit boards and other systems that require low-corrosion properties. Hycat™ OA was developed to meet certain European regulatory requirements; especially products that may come in contact with humans, e.g., toys, packaging, laminates, etc. voir moins
Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from...voir plus
Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from a polymer reaction leading to the production of consistently uniform cures that are free from cracks and voids. It is recommended for use in epoxy/anhydride formulations. voir moins
MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus
MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins
MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus
MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins
MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus
MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins
MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus
MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins
MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus
MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins
MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C.
MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C.
MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus
MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins
MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus
MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins
MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus
MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins
MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus
MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins
Tert-butyl Acetate is a colorless, transparent liquid. This product has a molecular weight of 116.6 g/cm³. Tert-butyl Acetate is used as a solvent and in coating material, paint, printing ink and sealing material applications.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Désolé mais l'industrie que vous avez sélectionnée n'est pas disponible actuellement dans votre langue. Vous pouvez choisir une des langues ci-dessous pour sélectionner l'industrie ou sinon fermer cette fenêtre.
