| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to ...voir plus 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min and a weight per epoxide of 131-143. voir moins | Request Sample |
| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to...voir plus 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min. voir moins | Request Sample |
| Auroren® 350S (Acrylic Modified Polyolefin Resin) | PhibroChem | Auroren® 350S (Acrylic Modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates ...voir plus Auroren® 350S (Acrylic Modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like PET and aluminum. Good solubility in non-aromatic solvents is also a great advantage of this product. Auroren® 350S appears as a light yellow pellet. voir moins | Request Sample |
| Auroren® 353S (Acrylic modified Polyolefin Resin) | PhibroChem | Auroren® 353S (Acrylic modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates ...voir plus Auroren® 353S (Acrylic modified Polyolefin Resin) is an acrylic modified polyolefin resin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like PET and aluminum. This product has a lower tackiness than Auroren® 350S. It can be applied as a coating, primer, ingredient, and adhesive for a variety of substances. voir moins | Request Sample |
| Auroren® AE-202 | PhibroChem | Auroren® AE-202 is a waterborne acrylic modified polyolefin developed with NPC’s original technology. AE-202 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Applicable ...voir plus Auroren® AE-202 is a waterborne acrylic modified polyolefin developed with NPC’s original technology. AE-202 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Applicable fields of AE-202 are coating, primer, ink ingredient, and adhesive for a variety of substrates. This product appears as a white to light brown aqueous liquid. voir moins | Request Sample |
| Auroren® AE-301 (Waterborne) | PhibroChem | Auroren® AE-301 (Waterborne) is a waterborne acrylic modified polyolefin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. Th...voir plus Auroren® AE-301 (Waterborne) is a waterborne acrylic modified polyolefin developed with NPC's original technology. It shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene, as well as to polar substrates like aluminum. This product has excellent alcohol tolerance. Applicable fields of AE-301 are coating, primer, ink ingredient, and adhesive for a variety of substrates. voir moins | Request Sample |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Superchlon® 390S | PhibroChem | Superchlon® 390S is a chlorinated polyolefin, mainly used as an additive for printing inks and coatings to polyolefins, especially to polypropylene substrates. It is easily soluble in various organic solvents and has a very good compatibility with various...voir plus Superchlon® 390S is a chlorinated polyolefin, mainly used as an additive for printing inks and coatings to polyolefins, especially to polypropylene substrates. It is easily soluble in various organic solvents and has a very good compatibility with various kinds of resins. Therefore, it can be used very easily as an additive. This product appears as a pale-yellow to light brown pellet. voir moins | Request Sample |
| Superchlon® 822S | PhibroChem | Superchlon® 822S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melami...voir plus Superchlon® 822S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds. This product appears as a yellow pellet. voir moins | Request Sample |
| Superchlon® 930S | PhibroChem | Superchlon® 930S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melami...voir plus Superchlon® 930S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds at low baking temperatures. This product appears as a pale-yellow to light brown pellet. voir moins | Request Sample |
| Superchlon® E-415 (Waterborne) | PhibroChem | Superchlon® E-415 (Waterborne) is an emulsion of a CPO resin which has a lower chlorine content and a higher molecular weight. The waterborne system of paints and adhesives has been required due to “environmental concern” in recent years. Hereupon, Phibro...voir plus Superchlon® E-415 (Waterborne) is an emulsion of a CPO resin which has a lower chlorine content and a higher molecular weight. The waterborne system of paints and adhesives has been required due to “environmental concern” in recent years. Hereupon, PhibroChem has developed the waterborne Superchlon® E-415 with its original technology. This product appears as a light brown liquid (dispersion). voir moins | Request Sample |
| Superchlon® JF421S | PhibroChem | Superchlon® JF421S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. Superchlon® JF421S has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes...voir plus Superchlon® JF421S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. Superchlon® JF421S has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds at low baking temperatures. This product appears as a pale-yellow to light brown pellet. voir moins | Request Sample |
| Superchlon® JF428S | PhibroChem | Superchlon® JF428S is a specially modified chlorinated polypropylene, mainly used for printing inks and coatings to polyolefin substrates. It appears as a pale-yellow pellet. Superchlon® JF428S is easily soluble in various organic solvents such as esters ...voir plus Superchlon® JF428S is a specially modified chlorinated polypropylene, mainly used for printing inks and coatings to polyolefin substrates. It appears as a pale-yellow pellet. Superchlon® JF428S is easily soluble in various organic solvents such as esters and ketones. It also has a very good compatibility with various kinds of resins so it can be used very easily as an additive. voir moins | Request Sample |
| SUPERCHLON® JFM736S | PhibroChem | SUPERCHLON® JFM736S is a specially modified chlorinated polypropylene, which is developed as a binder for PP films. It is easily soluble in various organic solvents such as esters and ketones. | Request Sample |
