| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...voir plus Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...voir plus Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...voir plus Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...voir plus Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...voir plus Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...voir plus Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...voir plus Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...voir plus Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...voir plus Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...voir plus Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...voir plus Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...voir plus Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...voir plus Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...voir plus Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...voir plus Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...voir plus Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. voir moins | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...voir plus Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. voir moins | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...voir plus Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. voir moins | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...voir plus Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. voir moins |
