| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...voir plus 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. voir moins | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...voir plus Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. voir moins | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...voir plus Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. voir moins | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....voir plus Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". voir moins | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...voir plus Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. voir moins | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...voir plus Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. voir moins | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...voir plus Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. voir moins | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...voir plus Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. voir moins | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...voir plus Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. voir moins | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...voir plus Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. voir moins | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...voir plus Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. voir moins | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...voir plus PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. voir moins | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...voir plus SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. voir moins | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...voir plus SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. voir moins | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...voir plus Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. voir moins | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...voir plus Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. voir moins | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...voir plus Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. voir moins | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...voir plus Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. voir moins | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...voir plus Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. voir moins | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...voir plus SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. voir moins | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...voir plus SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. voir moins | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...voir plus Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. voir moins | |
| StanChem SC 5019 | StanChem Polymers | StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper lam...voir plus StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper laminating adhesives, joint cement and textile sizing. voir moins | Request Sample |
| StanChem SC 5174 | StanChem Polymers | StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with S...voir plus StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility. voir moins | Request Sample |
| StanChem SC 5184 | StanChem Polymers | StanChem SC 5184 is a vinyl /acrylic copolymer designed for use in interior architectural coatings demanding excellent scrub resistance and reliable pigment dispersions. | Request Sample |
| StanChem SC 5186 | StanChem Polymers | StanChem SC 5186 is general-purpose polyvinyl acetate. It deposits a clear, tough film, which exhibits excellent resistance to heat and light. It provides good adhesion to cellulose. Films of SC 5186 exhibit good blocking resistance. | Request Sample |
| StanChem SC 5218 | StanChem Polymers | StanChem SC 5218 is a surfactant stabilized vinyl/acrylic copolymer emulsion for paints and coatings. SC 5218 provides formulators with superior scrub resistance, durability and flexibility. | Request Sample |
| StanChem SC 5255 | StanChem Polymers | StanChem SC 5255 is general-purpose, poly(vinyl alcohol) stabilized polyvinyl acetate polymer latex. | Request Sample |
| StanChem SC 5273 | StanChem Polymers | StanChem SC 5273 is a new generation vinyl /acrylic copolymer latex that contains no formaldehyde, no formaldehyde donors, no APEO’s and no phthalates. It is designed for use in paints, coatings and sealants. | Request Sample |
| StanChem SC 5274 | StanChem Polymers | StanChem SC 5274 is a vinyl acetate copolymer based pressure-sensitive emulsion with a good balance of peel, tack and shear properties. SC 5274 exhibits excellent adhesion to a variety of both rigid and flexible surfaces. SC 5274 is APEO free and free of ...voir plus StanChem SC 5274 is a vinyl acetate copolymer based pressure-sensitive emulsion with a good balance of peel, tack and shear properties. SC 5274 exhibits excellent adhesion to a variety of both rigid and flexible surfaces. SC 5274 is APEO free and free of formaldehyde and known formaldehyde generating chemicals. voir moins | Request Sample |
| StanChem SC 5400 | StanChem Polymers | StanChem SC 5400 is a general purpose vinyl acrylic latex that is internally plasticized to yield a low Tg. SC 5400 can be used in paints, coatings, adhesives and sealants. | Request Sample |
| StanChem SC 6044 | StanChem Polymers | StanChem SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning. | Request Sample |
| StanChem SC 6125 | StanChem Polymers | StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resi...voir plus StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resistant surface. It is readily paintable. voir moins | Request Sample |
| StanChem SC 6129 | StanChem Polymers | StanChem SC 6129 is an acrylic self-crosslinking emulsion binder designed for textiles, non-wovens and coatings requiring a soft feel.SC 6129 is formaldehyde free, contains no APEO surfactants and has no Prop 65 notice requirement. | Request Sample |
| StanChem SC 6133 | StanChem Polymers | StanChem SC 6133 is a 100% acrylic self-crosslinking emulsion binder designed for durable coatings and binders for textiles and non-wovens. SC 6133 is formaldehyde free and contains no APEO surfactants. | Request Sample |
| StanChem SC 6141 | StanChem Polymers | StanChem SC 6141 is a low molecular weight hydroxyl functional acrylic dispersion designed for cure with melamine or isocayanate crosslinking agents or used alone as a temporary, removable coating. | Request Sample |
| StanChem SC 6153 | StanChem Polymers | StanChem SC 6153 is a high Tg, heat reactive acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance and good pigment binding. | Request Sample |
| StanChem SC 6210 | StanChem Polymers | StanChem SC 6210 is a low odor, acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strengths and very low odor. | Request Sample |
| StanChem SC 6257 | StanChem Polymers | StanChem SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties. | Request Sample |
| StanChem SC 6261 | StanChem Polymers | StanChem SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention. | Request Sample |
| StanChem SC 6280 | StanChem Polymers | StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is...voir plus StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is recommended for use in fabric finishing, as an adhesive in laminating, and for bonding non-woven. voir moins | Request Sample |
| StanChem SC 6300 | StanChem Polymers | StanChem SC 6300 is an all acrylic copolymer designed for concrete sealers and stains that provides excellent weatherability and water blush resistance. SC 6300 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6445 | StanChem Polymers | StanChem SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine. | Request Sample |
| StanChem SC 6458 | StanChem Polymers | StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine ...voir plus StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine binders. voir moins | Request Sample |
| StanChem SC 6477 | StanChem Polymers | StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide o...voir plus StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening. voir moins | Request Sample |
| StanChem SC 6483 | StanChem Polymers | StanChem SC 6483 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. | Request Sample |
| StanChem SC 6502 | StanChem Polymers | StanChem SC 6502 is a styrene acrylic copolymer for the manufacture of water resistant coatings. | Request Sample |
| StanChem SC 6503 | StanChem Polymers | StanChem SC 6503 is a vinyl acrylic copolymer emulsion for pressure sensitive adhesive applications. | Request Sample |
| StanChem SC 6508 | StanChem Polymers | StanChem SC 6508 is an acrylic copolymer emulsion designed for exterior latex paints where wet adhesion is needed. Use of SC 6508 imparts improved adhesion to chalky and weathered surfaces. | Request Sample |
| StanChem SC 6553 | StanChem Polymers | StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature ...voir plus StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature film formation. voir moins | Request Sample |
| StanChem SC 6569 | StanChem Polymers | StanChem SC 6569 is a 100% acrylic copolymer emulsion designed for manufacturing inks for corrugated board. | Request Sample |
| StanChem SC 6640 | StanChem Polymers | StanChem SC 6640 is an acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strength. | Request Sample |
| StanChem SC 6643 | StanChem Polymers | StanChem SC 6643 is a styrene acrylic copolymer with excellent water resistance that is designed for use in paints and coatings applications. | Request Sample |
| StanChem SC 6655 | StanChem Polymers | StanChem SC 6655 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. | Request Sample |
| StanChem SC 6660 | StanChem Polymers | StanChem SC 6660 is an acrylic copolymer emulsion that exhibits good solvent resistance. Film formation at room temperature may require coalescing solvents. | Request Sample |
| StanChem SC 6686 | StanChem Polymers | StanChem SC 6686 is a low odor, acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strength. | Request Sample |
| StanChem SC 6694 | StanChem Polymers | StanChem SC 6694 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6694, in addition to durability; also exhibit good wet adhesion, good dirt resistance pickup and good gloss retention. | Request Sample |
| StanChem SC 6713 | StanChem Polymers | StanChem SC 6713 is an all acrylic copolymer latex that brings a high degree of flexibility and creep resistance to industrial coatings, sealants and adhesives. | Request Sample |
| StanChem SC 6735 | StanChem Polymers | StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:...voir plus StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:1 to 2:1 (latex to water). voir moins | Request Sample |
| StanChem SC 6742 | StanChem Polymers | StanChem SC 6742 is a high solids 100% acrylic copolymer emulsion for textile and non-woven applications. SC 6742 is APEO free and self-crosslinking. | Request Sample |
| StanChem SC 6744 | StanChem Polymers | StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent ...voir plus StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 6749 | StanChem Polymers | StanChem SC 6749 is a low Tg, flexible all acrylic polymer designed forcoatings, inks and colorants. SC 6749 provides flexibility in compounding with other acrylics or polyurethanes. SC 6749 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6763 | StanChem Polymers | StanChem SC 6763 is a medium hand 100% acrylic emulsion. SC 6763 provides outstanding durability to washing and dry cleaning. | Request Sample |
| StanChem SC 6826 | StanChem Polymers | StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and lam...voir plus StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and laminating adhesives. voir moins | Request Sample |
| StanChem SC 6829 | StanChem Polymers | StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall ...voir plus StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall and roof coatings requiring good dirt pick up resistance. voir moins | Request Sample |
| StanChem SC 6862 | StanChem Polymers | StanChem SC 6862 is a 100% acrylic copolymer emulsion designed for durable architectural paints. Paints and coatings made with SC 6862 will exhibit excellent weatherability, good flexibility and good wet adhesion. | Request Sample |
| StanChem SC 6872 | StanChem Polymers | StanChem SC 6872 is a crosslinking acrylic polymer, which is useful in a variety of textile and non-woven applications. It can be used to impart firmness of hand to a broad range of textiles and non-wovens. | Request Sample |
| StanChem SC 6873 | StanChem Polymers | StanChem SC 6873 is a high Tg, hard resin designed for industrial coatings. By itself or with other water dispersible binders, SC 6873 enhances dry time and hardness development in pigmented coatings or clear varnishes. | Request Sample |
| StanChem SC 6898 | StanChem Polymers | StanChem SC 6898 is a styrene-acrylic copolymer latex designed to provide excellent adhesion, low temperature flexibility and toughness for elastomeric coating applications. | Request Sample |
| StanChem SC 6901 | StanChem Polymers | StanChem SC 6901 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. SC 6901 provides high peel adhesion performance. | Request Sample |
| StanChem SC 6903 | StanChem Polymers | StanChem SC 6903 is a high viscosity, styrene acrylic copolymer emulsion designed for highly filled architectural and construction coatings and composites. Formulated products dry to hard, water resistant,toughthick films. | Request Sample |
| StanChem SC 6932 | StanChem Polymers | StanChem SC 6932 is an all acrylic copolymer latex exhibiting excellent adhesion, exterior durability and low temperature flexibility. It finds utility in elastomeric coatings, sealants and caulks. SC 6932 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6933 | StanChem Polymers | StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit goo...voir plus StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit good clarity, water resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 6957 | StanChem Polymers | StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion re...voir plus StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 7104 | StanChem Polymers | StanChem SC 7104 is a PVOH Solution. | Request Sample |
| StanChem SC 8212 | StanChem Polymers | StanChem SC 8212 is a medium solids, low viscosity pressure sensitive acrylic copolymer designed for a variety of paper, tape and label adhesives. SC 8212 provides quick tack and high peel strength. | Request Sample |
| Sulfolane Anhydrous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...voir plus Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. voir moins | |
| Sulfolane Aqueous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...voir plus Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. voir moins | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...voir plus UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. voir moins | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...voir plus UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. voir moins | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...voir plus UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. voir moins |
