| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...voir plus Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. voir moins | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...voir plus Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...voir plus Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. voir moins | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...voir plus Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. voir moins | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...voir plus DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient ...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...voir plus Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Silanes | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Silanes | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Silanes | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| StanChem SC 5019 | StanChem Polymers | StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper lam...voir plus StanChem 5019 is a HEC stabilized, vinyl acetate emulsion with very high molecular weight and a highly branched structure. SC 5019 exhibits good water resistance and high electrolyte tolerance. SC 5019 is recommended for use in the production of paper laminating adhesives, joint cement and textile sizing. voir moins | Request Sample |
| StanChem SC 5174 | StanChem Polymers | StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with S...voir plus StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility. voir moins | Request Sample |
| StanChem SC 5184 | StanChem Polymers | StanChem SC 5184 is a vinyl /acrylic copolymer designed for use in interior architectural coatings demanding excellent scrub resistance and reliable pigment dispersions. | Request Sample |
| StanChem SC 5186 | StanChem Polymers | StanChem SC 5186 is general-purpose polyvinyl acetate. It deposits a clear, tough film, which exhibits excellent resistance to heat and light. It provides good adhesion to cellulose. Films of SC 5186 exhibit good blocking resistance. | Request Sample |
| StanChem SC 5218 | StanChem Polymers | StanChem SC 5218 is a surfactant stabilized vinyl/acrylic copolymer emulsion for paints and coatings. SC 5218 provides formulators with superior scrub resistance, durability and flexibility. | Request Sample |
| StanChem SC 5255 | StanChem Polymers | StanChem SC 5255 is general-purpose, poly(vinyl alcohol) stabilized polyvinyl acetate polymer latex. | Request Sample |
| StanChem SC 5273 | StanChem Polymers | StanChem SC 5273 is a new generation vinyl /acrylic copolymer latex that contains no formaldehyde, no formaldehyde donors, no APEO’s and no phthalates. It is designed for use in paints, coatings and sealants. | Request Sample |
| StanChem SC 5274 | StanChem Polymers | StanChem SC 5274 is a vinyl acetate copolymer based pressure-sensitive emulsion with a good balance of peel, tack and shear properties. SC 5274 exhibits excellent adhesion to a variety of both rigid and flexible surfaces. SC 5274 is APEO free and free of ...voir plus StanChem SC 5274 is a vinyl acetate copolymer based pressure-sensitive emulsion with a good balance of peel, tack and shear properties. SC 5274 exhibits excellent adhesion to a variety of both rigid and flexible surfaces. SC 5274 is APEO free and free of formaldehyde and known formaldehyde generating chemicals. voir moins | Request Sample |
| StanChem SC 5400 | StanChem Polymers | StanChem SC 5400 is a general purpose vinyl acrylic latex that is internally plasticized to yield a low Tg. SC 5400 can be used in paints, coatings, adhesives and sealants. | Request Sample |
| StanChem SC 6044 | StanChem Polymers | StanChem SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning. | Request Sample |
| StanChem SC 6125 | StanChem Polymers | StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resi...voir plus StanChem SC 6125 is a vinyl acrylic copolymer emulsion designed for sealants and adhesives. SC 6125 provides excellent adhesion to wood and other surfaces. SC 6125 is an internally plasticized polymer that dries to a very flexible, tack free, water resistant surface. It is readily paintable. voir moins | Request Sample |
| StanChem SC 6129 | StanChem Polymers | StanChem SC 6129 is an acrylic self-crosslinking emulsion binder designed for textiles, non-wovens and coatings requiring a soft feel.SC 6129 is formaldehyde free, contains no APEO surfactants and has no Prop 65 notice requirement. | Request Sample |
| StanChem SC 6133 | StanChem Polymers | StanChem SC 6133 is a 100% acrylic self-crosslinking emulsion binder designed for durable coatings and binders for textiles and non-wovens. SC 6133 is formaldehyde free and contains no APEO surfactants. | Request Sample |
| StanChem SC 6141 | StanChem Polymers | StanChem SC 6141 is a low molecular weight hydroxyl functional acrylic dispersion designed for cure with melamine or isocayanate crosslinking agents or used alone as a temporary, removable coating. | Request Sample |
| StanChem SC 6153 | StanChem Polymers | StanChem SC 6153 is a high Tg, heat reactive acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance and good pigment binding. | Request Sample |
| StanChem SC 6210 | StanChem Polymers | StanChem SC 6210 is a low odor, acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strengths and very low odor. | Request Sample |
| StanChem SC 6257 | StanChem Polymers | StanChem SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties. | Request Sample |
| StanChem SC 6261 | StanChem Polymers | StanChem SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention. | Request Sample |
| StanChem SC 6280 | StanChem Polymers | StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is...voir plus StanChem SC 6280 is a crosslinking styrene-acrylic polymer, which is useful in a variety of textile and non-woven applications. SC 6280 forms a clear film. It can be used to impart a soft stiffness of hand to all types of textiles and non-wovens. It is recommended for use in fabric finishing, as an adhesive in laminating, and for bonding non-woven. voir moins | Request Sample |
| StanChem SC 6300 | StanChem Polymers | StanChem SC 6300 is an all acrylic copolymer designed for concrete sealers and stains that provides excellent weatherability and water blush resistance. SC 6300 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6445 | StanChem Polymers | StanChem SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine. | Request Sample |
| StanChem SC 6458 | StanChem Polymers | StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine ...voir plus StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine binders. voir moins | Request Sample |
| StanChem SC 6477 | StanChem Polymers | StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide o...voir plus StanChem SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening. voir moins | Request Sample |
| StanChem SC 6483 | StanChem Polymers | StanChem SC 6483 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. | Request Sample |
| StanChem SC 6502 | StanChem Polymers | StanChem SC 6502 is a styrene acrylic copolymer for the manufacture of water resistant coatings. | Request Sample |
| StanChem SC 6503 | StanChem Polymers | StanChem SC 6503 is a vinyl acrylic copolymer emulsion for pressure sensitive adhesive applications. | Request Sample |
| StanChem SC 6508 | StanChem Polymers | StanChem SC 6508 is an acrylic copolymer emulsion designed for exterior latex paints where wet adhesion is needed. Use of SC 6508 imparts improved adhesion to chalky and weathered surfaces. | Request Sample |
| StanChem SC 6553 | StanChem Polymers | StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature ...voir plus StanChem SC 6553 is a high solids, acrylic copolymer emulsion developed for paint and coating applications. Exterior and interior paints manufactured with SC 6553 exhibit good adhesion, flexibility and abrasion resistance and outstanding low temperature film formation. voir moins | Request Sample |
| StanChem SC 6569 | StanChem Polymers | StanChem SC 6569 is a 100% acrylic copolymer emulsion designed for manufacturing inks for corrugated board. | Request Sample |
| StanChem SC 6640 | StanChem Polymers | StanChem SC 6640 is an acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strength. | Request Sample |
| StanChem SC 6643 | StanChem Polymers | StanChem SC 6643 is a styrene acrylic copolymer with excellent water resistance that is designed for use in paints and coatings applications. | Request Sample |
| StanChem SC 6655 | StanChem Polymers | StanChem SC 6655 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. | Request Sample |
| StanChem SC 6660 | StanChem Polymers | StanChem SC 6660 is an acrylic copolymer emulsion that exhibits good solvent resistance. Film formation at room temperature may require coalescing solvents. | Request Sample |
| StanChem SC 6686 | StanChem Polymers | StanChem SC 6686 is a low odor, acrylic polymer emulsion specifically designed as a cement mortar modifier to impart outstanding flexural, adhesive and impact strength. | Request Sample |
| StanChem SC 6694 | StanChem Polymers | StanChem SC 6694 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6694, in addition to durability; also exhibit good wet adhesion, good dirt resistance pickup and good gloss retention. | Request Sample |
| StanChem SC 6713 | StanChem Polymers | StanChem SC 6713 is an all acrylic copolymer latex that brings a high degree of flexibility and creep resistance to industrial coatings, sealants and adhesives. | Request Sample |
| StanChem SC 6735 | StanChem Polymers | StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:...voir plus StanChem SC 6735 is a small particle sized acrylic copolymer emulsion designed for specialty coatings applications requiring a tough, water-resistant, clear coating. SC 6735 is typically diluted with water before application. Dilution ratio can be from 3:1 to 2:1 (latex to water). voir moins | Request Sample |
| StanChem SC 6742 | StanChem Polymers | StanChem SC 6742 is a high solids 100% acrylic copolymer emulsion for textile and non-woven applications. SC 6742 is APEO free and self-crosslinking. | Request Sample |
| StanChem SC 6744 | StanChem Polymers | StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent ...voir plus StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 6749 | StanChem Polymers | StanChem SC 6749 is a low Tg, flexible all acrylic polymer designed forcoatings, inks and colorants. SC 6749 provides flexibility in compounding with other acrylics or polyurethanes. SC 6749 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6763 | StanChem Polymers | StanChem SC 6763 is a medium hand 100% acrylic emulsion. SC 6763 provides outstanding durability to washing and dry cleaning. | Request Sample |
| StanChem SC 6826 | StanChem Polymers | StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and lam...voir plus StanChem SC 6826 is cross-linking acrylic latex, forming a soft film with excellent dry cleaning and laundering resistance. SC 6826 can be used as a binder for non-woven, fabric coating or saturation, water-based textile printing systems, flocking and laminating adhesives. voir moins | Request Sample |
| StanChem SC 6829 | StanChem Polymers | StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall ...voir plus StanChem SC 6829 is an all acrylic copolymer latex that provides excellent adhesion and flexibility to a variety of industrial coatings, sealants and adhesives. With its low glass transition temperature, SC 6829 is particularly suited for flexible wall and roof coatings requiring good dirt pick up resistance. voir moins | Request Sample |
| StanChem SC 6862 | StanChem Polymers | StanChem SC 6862 is a 100% acrylic copolymer emulsion designed for durable architectural paints. Paints and coatings made with SC 6862 will exhibit excellent weatherability, good flexibility and good wet adhesion. | Request Sample |
| StanChem SC 6872 | StanChem Polymers | StanChem SC 6872 is a crosslinking acrylic polymer, which is useful in a variety of textile and non-woven applications. It can be used to impart firmness of hand to a broad range of textiles and non-wovens. | Request Sample |
| StanChem SC 6873 | StanChem Polymers | StanChem SC 6873 is a high Tg, hard resin designed for industrial coatings. By itself or with other water dispersible binders, SC 6873 enhances dry time and hardness development in pigmented coatings or clear varnishes. | Request Sample |
| StanChem SC 6898 | StanChem Polymers | StanChem SC 6898 is a styrene-acrylic copolymer latex designed to provide excellent adhesion, low temperature flexibility and toughness for elastomeric coating applications. | Request Sample |
| StanChem SC 6901 | StanChem Polymers | StanChem SC 6901 is a high solids, pressure sensitive acrylic copolymer designed for a variety of tape and label applications. SC 6901 provides high peel adhesion performance. | Request Sample |
| StanChem SC 6903 | StanChem Polymers | StanChem SC 6903 is a high viscosity, styrene acrylic copolymer emulsion designed for highly filled architectural and construction coatings and composites. Formulated products dry to hard, water resistant,toughthick films. | Request Sample |
| StanChem SC 6932 | StanChem Polymers | StanChem SC 6932 is an all acrylic copolymer latex exhibiting excellent adhesion, exterior durability and low temperature flexibility. It finds utility in elastomeric coatings, sealants and caulks. SC 6932 is APEO free and formaldehyde free. | Request Sample |
| StanChem SC 6933 | StanChem Polymers | StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit goo...voir plus StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit good clarity, water resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 6957 | StanChem Polymers | StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion re...voir plus StanChem SC 6957 is a small particle size styrene acrylic copolymer latex that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6957 exhibit high hardness, good clarity, water resistance, abrasion resistance and excellent adhesion properties. voir moins | Request Sample |
| StanChem SC 7104 | StanChem Polymers | StanChem SC 7104 is a PVOH Solution. | Request Sample |
| StanChem SC 8212 | StanChem Polymers | StanChem SC 8212 is a medium solids, low viscosity pressure sensitive acrylic copolymer designed for a variety of paper, tape and label adhesives. SC 8212 provides quick tack and high peel strength. | Request Sample |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Silanes | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| VPS SIVO 260 | Evonik Operations GmbH, BL Silanes | VPS SIVO 260 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reaction...voir plus VPS SIVO 260 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reactions with ketones or ester solvents. Helps eliminate the need for special primers in numerous bonding applications. Exhibits excellent wetting on substrates and forms weather- and moisture-resistant bonds to substrates which are partially difficult to adhere, well balanced mechanical properties and significant VOC-reduction compared to conventional amino silanes. Suitable for use in adhesive and sealants, silane modified polyurethane/ polyether, RTV-1/RTV-2 silicones, butyl rubber and improved adhesion especially to polycarbonate. Recommended dosage for VPS SIVO 260 is 0-5-2.0 wt. %. It has a shelf life of 9 months. voir moins | |
| VPS SIVO 280 | Evonik Operations GmbH, BL Silanes | VPS SIVO 280 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reaction...voir plus VPS SIVO 280 is an organofunctional silane oligomer. Acts as an adhesion promoter. Leads to adequate adhesive cure and imparts additional flexibility and hydrophobicity. Soluble in alcohols, aliphatic and aromatic hydrocarbons, but it can undergo reactions with ketones or ester solvents. Helps eliminate the need for special primers in numerous bonding applications. Exhibits excellent wetting on substrates and forms weather- and moisture-resistant bonds to substrates which are partially difficult to adhere, well balanced mechanical properties and significant VOC-reduction compared to conventional amino silanes. Suitable for use in adhesive and sealants, silane modified polyurethane/ polyether, RTV-1/RTV-2 silicones, butyl rubber and improved adhesion especially to PMMA. Recommended dosage for VPS SIVO 260 is 0-5-2.0 wt. %. It has a shelf life of 9 months. voir moins |
