| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Resinate® A0351-12 Green Strength Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are...voir plus Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. voir moins | |
| Resinate® A0352-73 High-Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline a...voir plus Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline and amorphous phase, good adhesion on high and medium surface energy plastics, excellent water and chemical resistance. voir moins | |
| Resinate® A0353-75 Multi-Purpose Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and am...voir plus Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and amorphous phase, good adhesion on a variety of plastic surfaces, excellent water and chemical resistance. voir moins | |
| Resinate® A2551-100 Polyol for Solventless 2k Adhesives | Resinate Materials Group, Inc. | Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...voir plus Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Long pot life, low viscosity, excellent water and chemical resistance. voir moins | |
| Resinate® A2552-100 High Recycled Content Polyol for Solventless Adhesives | Resinate Materials Group, Inc. | Resinate® A2552-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...voir plus Resinate® A2552-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Low viscosity, good adhesion, high recycled content, good chemical resistance. voir moins | |
| Resinate® A2553-76 Multi-Purpose Polyol for Solventless Adhesives | Resinate Materials Group, Inc. | Resinate® A2553-76 is a developmental polyester polyol made with 76.1% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on a variety of substrates is required. Excell...voir plus Resinate® A2553-76 is a developmental polyester polyol made with 76.1% recycled and renewable content. It is ideal for solventless 2K or moisture cure adhesive applications where superior adhesion performance on a variety of substrates is required. Excellent adhesion performance on a variety of surfaces, low viscosity, excellent water and chemical resistance. voir moins | |
| Resinate® C1051-60 (BA80) Polyol for Direct to Metal Coatings | Resinate Materials Group, Inc. | Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, ...voir plus Resinate® C1051-60 (BA80) is an aromatic polyester polyol made with 60% recycled and renewable content on a solids basis. This polyol is supplied at 80% solids in n-butyl acetate. Good balance of hardness and flexibility, excellent corrosion protection, 60% recycled and renewable content. voir moins | |
| Resinate® C1181-100 High Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...voir plus Resinate® C1181-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Ideal balance of hardness and flexibility, good water resistance, good chemical resistance. voir moins | |
| Resinate® C1182-100 Mid-Flexibility Modifying Polyol | Resinate Materials Group, Inc. | Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key conside...voir plus Resinate® C1182-100 is a developmental aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good mechanical properties with flexibility in polyurethane products, good water resistance, good chemical resistance. voir moins | |
| Resinate® C2051-50 Concrete Coating Polyol | Resinate Materials Group, Inc. | Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect im...voir plus Resinate® C2051-50 is a low viscosity high-performance polyester polyol for 2K polyurethane top coats. This polyol is designed for demanding flooring and concrete coating applications where a high degree of flexibility and hardness with direct/indirect impact resistance is required. voir moins | |
| Resinate® C2441 Corrosion Control Polyol | Resinate Materials Group, Inc. | Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide signif...voir plus Resinate® C2441 is a reactive diluent useful as a performance blend polyol for industrial coatings. It has diol functionality, has very low color, is a flowable liquid at ambient temperature, and when blended with suitable resin systems can provide significant enhancement of several critical properties for metal protection. Excellent corrosion protection, good balance of hardness and flexibility, good chemical and stain resistance, very good adhesion. voir moins | |
| Resinate® C2901-04 (PMA80) | Resinate Materials Group, Inc. | Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal app...voir plus Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal applications where weather stability and versatile performance systems are required. voir moins | |
| Resinate® C3851-100 Low Viscosity Building Block Polyol | Resinate Materials Group, Inc. | Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good...voir plus Resinate® C3851-100 is an aromatic polyester polyol made with 99.9% recycled and renewable content. It is ideal for demanding Coating, Adhesive, Sealant and Elastomer applications where performance, cost and sustainability are all key considerations. Good balance of hardness and flexibility, good water resistance, good chemical resistance. voir moins |
