| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| Eco Soluryl 124 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suita...voir plus Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suitable for highly viscous inks. voir moins | |
| Eco Soluryl 72 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol e...voir plus Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol ether free emulsion, and coating materials for glycol ether free water base OPV. voir moins | |
| Eco Soluryl 824 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 824 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, and excellent ink transfer and printability. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| PEAM-1044 | Designer Molecules | PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application. | |
| PEAM-1769 | Designer Molecules | PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application. | |
| PEAM-645 | Designer Molecules | PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications. | |
| PEM-1066 | Designer Molecules | PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins | |
| SHD-852 Ammonia | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion...voir plus SHD-852 Ammonia is a water-based resin solution for high performance dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink and offers improved dispersion and ink stability compared to conventional dispersion resin solutions. voir moins | |
| SHD-852 MEA | Hanwha Chemical (Thailand) Co., Ltd. | SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion r...voir plus SHD-852 MEA is a Water-based resin solution for High performance Dispersion. It is ideal for use as a high performance pigment grinding vehicle for the water base ink, and offers improved dispersion and color strength compared to conventional dispersion resin solutions. voir moins | |
| Soluryl 121W | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 121W is a low acid number solid resin for water-based products, and is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wood coating, and a coating materials for water-based OPV. | |
| Soluryl 160 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film fo...voir plus Soluryl 160 is a high molecular weight for high performance water-based products and is compatible with most common emulsions. It is a high performance grade, provides excellent pigment dispersion, excellent ink transfer and printability, and good film forming ability and adhesion. voir moins | |
| Soluryl 20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 20 is a low molecular weight styrene-acryl resin for water-based products. It is a gloss improving additives in water based overprint varnishes to produce a high gloss finish product. | |
| Soluryl 60L | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating m...voir plus Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating materials for water base OPV, and solvent base ink and OPV. voir moins | |
| Soluryl 70 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 70 is a grinding vehicle and polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and good viscosity stability and high gloss. | |
| Soluryl 80 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 80 is a grinding vehicle & polymer surfactant for water-based products, and is compatible with most common emulsion. It is ideal for use as a pigment grinding vehicle, polymer surfactant for emulsion, and coating materials for water base OPV. | |
| Soluryl 802 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 802 is a resin solution for high performance water-based products. It provides excellent pigment dispersion, ink transfer and printability, good film forming property and adhesion, and has good compatibility with Soluryl emulsions. | |
| Soluryl 812 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 812 is a resin solution for water-based products. It provides good pigment dispersion, excellent ink transfer and printability, and good compatibility with Soluryl emulsions. | |
| Soluryl 90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 90 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and is suitable for mid viscous inks. | |
| Soluryl 902G | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 902G is a resin solution for pigment grinding. It provides good pigment dispersion, excellent ink transfer and printability, and good compatibility with Soluryl emulsions. | |
| Soluryl 94 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 94 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, good ink transfer and printability, and is suitable for mid viscous inks. | |
| Soluryl CE-0113 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl CE-0113 is an acrylic colloidal emulsion for water base ink. It is ideal for use as a water base ink for post print corrugated paper and kraft paper. | |
| Soluryl CE-1217 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl CE-1217 is an acrylic colloidal emulsion for water base ink for pre-print corrugated paper. It is low in cost, provides good viscosity control, excellent transfer and printability, and is APEO free. | |
| Soluryl E-8040 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-8040 is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| Soluryl E-80T (APE Free) | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-80T (APE Free) is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| Soluryl EW-842 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl EW-842 is a self-crosslinkable acrylic copolymer emulsion for use in 1K universal water-based wood coating. | |
| Soluryl R-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-20 is a low Tg emulsion for water-based products that is compatible with a wide range of other acrylics. It is recommended for use as paper coating and let down vehicle for carton paper. | |
| Soluryl R-20B | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-20B is a mid Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and let down vehicle for carton paper. | |
| Soluryl R-90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-90 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and Let down vehicle for carton paper. | |
| Soluryl R-9020 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-9020 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl R-9061 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-9061 is a high Tg emulsion for water-based products that is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl R-92 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-92 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl RH-615 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RH-615 is a Styrene-Acryl Emulsion for Heat Seal application that is compatible with a wide range of other acrylics. It is clear and transparent, has good adhesion, good heat seal properties, and good viscosity stability as pH. | |
| Soluryl RP-590 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RP-590 is a modified acryl-styrene copolymer for use in pre-print application. It provides heat resistance, anti-blocking properties, rub resistance, and high gloss. | |
| Soluryl RV-4916 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent glo...voir plus Soluryl RV-4916 is a modified styrene-acryl copolymer for water-based products and is compatible with a wide range of other acrylics. It is recommended for overprint vanish for endless press coating and paper coating and Let down vehicle for excellent gloss and water resistance. voir moins | |
| Soluryl RV-4965 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4965 is a modified acryl-styrene copolymer for use in water-based calender overprint vanish. It is compatible with a wide range of other acrylics. | |
| Soluryl RW-114 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-114 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. It is a non film forming emulsion, has excellent hardness, a good appearance, and compatibility with soluryl emulsions. | |
| Soluryl RW-116 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-116 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. | |
| Soluryl RW-842 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-842 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. It is ideal for use as a universal coating for top, primer and sealer of wood substrate. | |
| Soluryl RX-10T | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-10T is a modified acrylic copolymer emulsion for water-based products that is compatible with a wide range of other acrylics. It has good adhesion, good film forming and wetting properties, and good waster resistance. | |
| Soluryl RX-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let dow...voir plus Soluryl RX-20 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as overprint varnishes for rub resistance and anti-slip coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. voir moins | |
| Soluryl RX-30 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as...voir plus Soluryl RX-30 is a crosslinked acryl-styrene emulsion for water-based products. It is recommended as an overprint varnishes for rub resistance and hard film forming coating, paper coating and Let down vehicle for excellent gloss and rub resistance, and as a let down vehicle for good adhesion for Al foil. voir moins | |
| Soluryl S-120 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-120 is a grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, good ink transfer and printability, high viscosity, and good resistance. | |
| Soluryl S-122W | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-122W is a low acid number solid resin for water-based products, and is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wood coating, and coating materials for water-based OPV. | |
| Soluryl S-820 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-820 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, high gloss and transparent, and excellent ink transfer and printability. | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Soluryl SE-1301 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE...voir plus Soluryl SE-1301 is a modified acryl-styrene copolymer for water-based products. It is recommended for use as overprint varnishes for good adhesion property, overprint varnishes for film and paper, and as a let down vehicle for film as like PET, OPP and PE. voir moins | |
| Soluryl SX-1420 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl SX-1420 is a crosslinked styrene-acryl emulsion for water-based products. It is recommended for improving agent for good adhesion, coating and Let down vehicle for good adhesion, and as a coating and Let down vehicle for film and metal. | |
| Soluwet100 | Hanwha Chemical (Thailand) Co., Ltd. | Soluwet100 is a nonionic surfactant for grinding pigment and making emulsion with typical properties. It is ideal for use in Pigment grinding additives for ink, nonionic surfactant for emulsion, and as a wetting agent for water base OPV. | |
| Soluwet200 | Hanwha Chemical (Thailand) Co., Ltd. | Soluwet200 is a Nonionic surfactant for grinding pigment and is compatible with most common solid resins and emulsions. It is ideal for use for pigment grinding additives for ink. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| U-793 | Designer Molecules | U-793 is a brown viscous liquid form, urethane resin. This product yields a tough hydrophobic polymer when cured. U-793 is most commonly used as an adhesion promoter to various substrates. | |
| U-835 | Designer Molecules | U-835 is a yellow liquid form urethane resin. This products low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. U-835 is most commonly used as an adhesive on a variety of substrates including metal, polyimide, s...voir plus U-835 is a yellow liquid form urethane resin. This products low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. U-835 is most commonly used as an adhesive on a variety of substrates including metal, polyimide, silicon, and ceramic applications. voir moins |
