| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| PEAM-1044 | Designer Molecules | PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application. | |
| PEAM-1769 | Designer Molecules | PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application. | |
| PEAM-645 | Designer Molecules | PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications. | |
| PEM-1066 | Designer Molecules | PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins | |
| RC 84 | CINKARNA | RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster...voir plus RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster and silicon paints. voir moins | |
| SiSiB® PC1100 | SiSiB SILICONES | SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and r...voir plus SiSiB® PC1100 is a colorless transparent liquid. It is a is a versatile amino-functional coupling agent. It is applied in plastic products, rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials, metallic casting resins and resins concrete, etc; it maximizes the physical and electrical properties of mineral-filled phenolics, epoxies, polyamides, polybutylene terephthalate, and a host of other thermoset and thermoplastic composites; improves adhesion between magnetic powder and organic resins and dispersion of magnetic powder inorganic resins; improves pigment dispersion and maximizes adhesion to glass, aluminum, and steel with nitrile, polysulfide, epoxy, urethane, and adhesives and sealants; imparts moisture resistance and allows recovery after compression when used as a phenolics resin binder additive in glass fiber and mineral wool insulation; strengthens the bond between the phenolics binder and foundry sand in shell molding foundry applications; promotes an improved, water-resistant bond between the abrasive grit and phenolics resin binder in grinding wheels; and works as an adhesion promoter in urethane, epoxy, and acrylic latex coatings, adhesives, and sealants. voir moins | |
| SiSiB® PC1108 | SiSiB SILICONES | SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural s...voir plus SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural strength, tensile strength, impact strength and modulus of elasticity; moisture and corrosion resistance; adhesion; or filler dispersion. It can be used for applications including glass fiber/glass fabric composites; metal primers; as additive to phenolic resin binders for mineral fiber insulating materials and abrasives; as additive to phenolic, furane and melamine resins; as a primer or additive in sealants and adhesives; as mineral-filled polymers (composites) or HFFR cables; as pretreatment of fillers and pigments; or for improvement of adhesive to the substrate in paints and coatings. voir moins | |
| SiSiB® PC1110 | SiSiB SILICONES | SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used...voir plus SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy, and phenol); improve the wet resistance and mechanical performance in the glass wool and FRP products when added in to phenol resins; promote adhesion in RTV silicones and other hybrid sealants including SPURSM technology, particularly for difficult substrates such as ABC, PVC ad Poly Shyrene; and as a component in primer systems for hybrid and polyurethane sealants. voir moins | |
| SiSiB® PC1118 | SiSiB SILICONES | SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications inc...voir plus SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine resins; a primer or additive in sealants and adhesives; mineral-filled polymers (composites) or HFFR cables; pretreatment of fillers and pigments; improvement of adhesion to the substrate in paints and coatings; improvement of flexural strength, tensile strength, impact strength and modulus of elasticity; or resistance to moisture and corrosion. voir moins | |
| SiSiB® PC1120 | SiSiB SILICONES | SiSiB® PC1120 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...voir plus SiSiB® PC1120 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders; as a primer or additive and for the chemical modification of sealants and adhesives; as a pretreatment of fillers and pigments or as an additive in mineral-filled composites; synthesis of functional silicones; for improvements in adhesion, mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. voir moins | |
| SiSiB® PC1130 | SiSiB SILICONES | SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...voir plus SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders in abrasives; as primer or additive and for chemical modification in sealants and adhesives; for pretreatment of fillers and pigments or as additive in mineral-filled composites; for synthesis of functional silicones; for improvements in adhesion or mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. voir moins | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or ...voir plus SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. voir moins | |
| SiSiB® PC1220 | SiSiB SILICONES | SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to pr...voir plus SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. voir moins | |
| SiSiB® PC1320 | SiSiB SILICONES | SiSiB® PC1320 is a clear to straw liquid with a slight amine-like odor that is soluble in alcohols, ketones, esters, and apliphatic and aromatic hydrocarbon solvents. It is an organofunctional silane possessing three reactive amino groups and hydrolyzabl...voir plus SiSiB® PC1320 is a clear to straw liquid with a slight amine-like odor that is soluble in alcohols, ketones, esters, and apliphatic and aromatic hydrocarbon solvents. It is an organofunctional silane possessing three reactive amino groups and hydrolyzable methoxysilyl group. It can be used as an adhesion promoter in sealants, adhesives and coatings; as a surface modifier for fillers; or in the production of silyl-modified polymers which serve as binders in adhesives and sealants. voir moins | |
| SiSiB® PC1412 | SiSiB SILICONES | SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starti...voir plus SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starting material in the synthesis of amino-functional silicones. voir moins | |
| SiSiB® PC1710 | SiSiB SILICONES | SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crossl...voir plus SiSiB® PC1710 is a yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesive promoter in silane-crosslinking formulations, such as adhesive sealants, and coatings; or as a surface modifier for fillers (like glass, metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. voir moins | |
| SiSiB® PC1711 | SiSiB SILICONES | SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in ...voir plus SiSiB® PC1711 is a colorless to yellowish clear liquid. It is a novel alfa silane. It can be used in the production of silyl modified polymers which serve as binders in adhesives and sealants; as a crosslinker, water scavenger, and adhesion promoter in silane-crosslinking formulations, such as adhesives, sealants, and coatings; or as a surface modifier for fillers (like glass metal oxides, aluminum hydroxide, kaolin, wollastonite, mica) and pigments. voir moins | |
| SiSiB® PC1951 | SiSiB SILICONES | SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inor...voir plus SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inorganic trimethoxysilyl groups. It can be used as a primer or additive and for the chemical modification of sealants and adhesives; as a size constituent or finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins used in foundry resins; for pretreatment of fillers and pigments used in mineral-filled polymers; as a primer and additive to improve the adhesion of paints and coatings to the substrate; as an endcapper for polyurethanes; or as starting material in the synthesis of amino-functional silicones. voir moins | |
| SiSiB® PC2300 | SiSiB SILICONES | SiSiB® PC2300 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to impr...voir plus SiSiB® PC2300 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. voir moins | |
| SiSiB® PC2310 | SiSiB SILICONES | SiSiB® PC2310 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improv...voir plus SiSiB® PC2310 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. voir moins | |
| SiSiB® PC2320 | SiSiB SILICONES | SiSiB® PC2320 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improv...voir plus SiSiB® PC2320 is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. It can be used as coupling agent to improve the adhesion of sulfur cured elastomers (polysulfide, polyurethane sealants) to inorganic fillers (such as silica, clay, glass, mica and talc etc.), fiberglass and surfaces; to improve properties of mineral filled elastomer, including modulus, tensile and tear strength, heat buildup, abrasion resistance, resilience, compression set and cure time; as a pretreatment on minerals or added at the time of compounding; or to improve low-rolling resistance in silica-reinforced tire tread compounds. voir moins | |
| SiSiB® PC2510 | SiSiB SILICONES | SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant a...voir plus SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant adhesion to oil metals; it can improve adhesion between the inorganic filler or fiber and the polymer; and can be used for glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders. voir moins | |
| SiSiB® PC2520 | SiSiB SILICONES | SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyuretha...voir plus SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. voir moins | |
| SiSiB® PC2521 | SiSiB SILICONES | SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, ...voir plus SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. voir moins | |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...voir plus SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. voir moins | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...voir plus SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. voir moins | |
| SiSiB® PC2780 | SiSiB SILICONES | SiSiB® PC2780 is a clear to straw liquid. It is a highly effective siloxane crosslinker. It can be used as an adhesion promoter and crosslinker in sealants and adhesives or coatings applications or to modify surfaces of inorganic materials, pigments or f...voir plus SiSiB® PC2780 is a clear to straw liquid. It is a highly effective siloxane crosslinker. It can be used as an adhesion promoter and crosslinker in sealants and adhesives or coatings applications or to modify surfaces of inorganic materials, pigments or fillers (mica or mineral wool, glass, metal oxides etc.). voir moins | |
| SiSiB® PC3100 | SiSiB SILICONES | SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving siz...voir plus SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. voir moins | |
| SiSiB® PC3200 | SiSiB SILICONES | SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...voir plus SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. voir moins | |
| SiSiB® PC3300 | SiSiB SILICONES | SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...voir plus SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. voir moins | |
| SiSiB® PC3400 | SiSiB SILICONES | SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...voir plus SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. voir moins | |
| SiSiB® PC3500 | SiSiB SILICONES | SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...voir plus SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. voir moins | |
| SiSiB® PC3510 | SiSiB SILICONES | SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...voir plus SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. voir moins | |
| SiSiB® PC4100 | SiSiB SILICONES | SiSiB® PC4100 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and ...voir plus SiSiB® PC4100 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; functionalize resins via radical initiated processes - copolymerization or grafting and to modify surfaces; improve strength as glass fiber size composite in reinforced polyester composites; enhance initial and wet strength of reinforced polyester resin composites; enhance the wet electrical properties of many mineral-filled and reinforced composites; and improve adhesion and durability of adhesives and coatings. voir moins | |
| SiSiB® PC4200 | SiSiB SILICONES | SiSiB® PC4200 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical ...voir plus SiSiB® PC4200 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; to functionalize resins via radical initiated processes - copolymerization or grafting - and to modify surfaces; improve the wet mechanical property and electric property of glass fiber reinforced composite material; improve consumption factor and specific inductance captance when used to treat EPDM systems in the wire and cable industry; or as a coating, adhesive, and sealing agent. voir moins | |
| SiSiB® PC4300 | SiSiB SILICONES | SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical ...voir plus SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; to functionalize resins via radical initiated processes - copolymerization or grafting - and to modify surfaces; improve strength as glass fiber size composite in reinforced polyester composites; enhance initial and wet strength of reinforced polyester resin composites; enhance the wet electrical properties of many mineral-filled and reinforced composites; and improve adhesion and durability of adhesives and coatings. voir moins | |
| SiSiB® PC4600 | SiSiB SILICONES | SiSiB® PC4600 is a colorless transparent liquid. It is an organic functional coupling agent, newly developed as an adhesion promoter and reinforcing agents. It is used as a versatile coupling agent that can be used in many applications utilizing a free-r...voir plus SiSiB® PC4600 is a colorless transparent liquid. It is an organic functional coupling agent, newly developed as an adhesion promoter and reinforcing agents. It is used as a versatile coupling agent that can be used in many applications utilizing a free-radical cure mechanism, or in fiber-optic coatings, acrylic coatings, artificial marble, adhesives & sealants, and thermoplastics. voir moins | |
| SiSiB® PC4700 | SiSiB SILICONES | SiSiB® PC4700 is a colorless transparent liquid. It is a coupling agent that can be used in many applications. | |
| SiSiB® PC5011 | SiSiB SILICONES | SiSiB® PC5011 is a colorless transparent liquid. It can be used as a coupling agent to improve adhesion of organic resins to inorganic surfaces, as an additive in a urethane adhesive formulations, as a coupling agent for epoxy resins to glass in laminate...voir plus SiSiB® PC5011 is a colorless transparent liquid. It can be used as a coupling agent to improve adhesion of organic resins to inorganic surfaces, as an additive in a urethane adhesive formulations, as a coupling agent for epoxy resins to glass in laminates, as a coupling agent for treating glass fabric used in polystyrene laminates, or as an intermediate for other functional organosilanes. voir moins | |
| SiSiB® PC5120 | SiSiB SILICONES | SiSiB® PC5120 is a colorless clear liquid. It can be used as an intermediate for silane coupling agents or to produce methyl hydrogen silicone fluid. | |
| SiSiB® PC5130 | SiSiB SILICONES | SiSiB® PC5130 is a colorless clear liquid. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used in the production of silane crosslinkers, silane coupling agents, and siloxanes; as a hydrophobi...voir plus SiSiB® PC5130 is a colorless clear liquid. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used in the production of silane crosslinkers, silane coupling agents, and siloxanes; as a hydrophobic treatment; or for pyrolysis to form Si-C coatings. voir moins | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings...voir plus SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. voir moins |
