| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...voir plus The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. voir moins | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...voir plus The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. voir moins | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...voir plus Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. voir moins | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...voir plus The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. voir moins | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| PEAM-1044 | Designer Molecules | PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application. | |
| PEAM-1769 | Designer Molecules | PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application. | |
| PEAM-645 | Designer Molecules | PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications. | |
| PEM-1066 | Designer Molecules | PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins | |
| RAYCORE® 9021A | Specialty Polymers, Inc. | RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with...voir plus RAYCORE® 9021A is anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV protection. RAYCORE® 9021A properties allow it to adhere to several different surfaces and be formulated with low VOC. The primary use for this product is to apply a thin coat to the surface and provide UV and scratch protection and water resistance. voir moins | |
| RAYCORE® 9506A | Specialty Polymers, Inc. | RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfa...voir plus RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfaces and to produce scratch resistance. This product primarily is used for topcoat chemical, water and scratches resistance on hard wood and cement surfaces. voir moins | |
| RAYCORE® 9534A | Specialty Polymers, Inc. | RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has th...voir plus RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has the ability to be formulated to low VOC levels. The RAYCORE® 9534A topcoat protects surfaces from scratches, chemicals and water corrosion. voir moins | |
| RAYCRYL® 1096 | Specialty Polymers, Inc. | RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood...voir plus RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood applications. It has hot wet block resistance on concrete as a sealer. The primary use for this product is for moisture and effofescence resistance, clear topcoats and scratch/chemical resistance. voir moins | |
| RAYCRYL® 1120 | Specialty Polymers, Inc. | RAYCRYL® 1120 is anionic self-crosslinking acrylic core shell polymer emulsion that is APEO and formaldehyde free. This product has adhesion properties that allow for architectural concrete and to be applied to woods. This product passes KCMA testing for ...voir plus RAYCRYL® 1120 is anionic self-crosslinking acrylic core shell polymer emulsion that is APEO and formaldehyde free. This product has adhesion properties that allow for architectural concrete and to be applied to woods. This product passes KCMA testing for wood applications; it is primarily used for a concrete sealer. This product also protects woods and concretes from scratches and chemical corrosion. voir moins | |
| RAYCRYL® 1240 | Specialty Polymers, Inc. | RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the sur...voir plus RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the surface has been sanded to seal the surface. voir moins | |
| RAYCRYL® 1526 | Specialty Polymers, Inc. | RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the woo...voir plus RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the wood, aged alkyd, and cement surfaces; and is primarily used to protect surfaces from water resistance and a sealer for concrete. voir moins | |
| RAYCRYL® 410 | Specialty Polymers, Inc. | RAYCRYL® 410 is a 100% nonionic acrylic emulsion intended for mixing with cement and concrete products. Precisely intended as a polymer modifier for cement, RAYCRYL® 410 provides feasible, flexible and strength. Due to its performance under high temperatu...voir plus RAYCRYL® 410 is a 100% nonionic acrylic emulsion intended for mixing with cement and concrete products. Precisely intended as a polymer modifier for cement, RAYCRYL® 410 provides feasible, flexible and strength. Due to its performance under high temperature conditions RAYCRYL® 410 exhibits an exceptional pot life. The primary use for this product is as a concrete and elastomeric application. voir moins | |
| RAYCRYL® 708E | Specialty Polymers, Inc. | RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It...voir plus RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It has an exclusive core-shell technology that provides water resistance after it cures and hardens. voir moins | |
| RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to...voir plus RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. voir moins | |
| RAYCRYL® H30S | Specialty Polymers, Inc. | RAYCRYL® H30S is an anionic acrylic blocking additive emulsion. This product is fully intended for refining blocking resistance of architectural trim enamels, industrial primers and topcoats. It is compatible with several different acrylics. RAYCRYL® H30S...voir plus RAYCRYL® H30S is an anionic acrylic blocking additive emulsion. This product is fully intended for refining blocking resistance of architectural trim enamels, industrial primers and topcoats. It is compatible with several different acrylics. RAYCRYL® H30S can be combined at levels of 5 – 15% for enhanced hardness and blocking abilities. The primary use of RAYCRYL® H30S is that it can be combined with a wide range of acrylics thus improving the blocking abilities. voir moins | |
| RAYFLEX® 2024 | Specialty Polymers, Inc. | RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...voir plus RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. voir moins | |
| RAYFLEX® 765 | Specialty Polymers, Inc. | RAYFLEX® 765 is anionic elastomeric styrene acrylic emulsion. This product is intended for several different outdoor coatings. The primary use of RAYFLEX® 765 is for flexible roof coatings, textured finishes and wall mastics. Using this product to formula...voir plus RAYFLEX® 765 is anionic elastomeric styrene acrylic emulsion. This product is intended for several different outdoor coatings. The primary use of RAYFLEX® 765 is for flexible roof coatings, textured finishes and wall mastics. Using this product to formulate a coating offers stretchable strength, elongation properties, low temperature flexibility and outstanding water resistance. voir moins | |
| RAYFLEX® 777 | Specialty Polymers, Inc. | RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low tempe...voir plus RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low temperature flexibility and tensile properties that adhere to polyurethane foam and different construction substrates. RAYFLEX® 777 primary uses are to coat construction roofs and provide UV protection, water resistance and temperature flexibility. voir moins | |
| RAYKOTE® 1431 | Specialty Polymers, Inc. | RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufa...voir plus RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufactured interiors and exterior wood primers. voir moins | |
| RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...voir plus RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. voir moins | |
| RAYKOTE® 1515 | Specialty Polymers, Inc. | RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflore...voir plus RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflorescence corrosion. It is best for rough surfaces as it has pigment binding ability and steadiness when it is used as part of the grind base. The primary use of this product is to be applied so it adheres to a surface and is used to protect against water and other chemical corrosion. RAYKOTE® 1515 can also be blended with other resins. voir moins | |
| RAYKOTE® 1610 | Specialty Polymers, Inc. | RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It pass...voir plus RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It passes class A type 1 ASTM C1315 for concrete and also passes KCMA. voir moins | |
| RAYKOTE® 2000 | Specialty Polymers, Inc. | RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. R...voir plus RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. RAYKOTE® 2000 is a formulated coating that is able to adhere wet and dry to galvanized, aluminum, wood and aged alkyd enamel materials. voir moins | |
| RAYKOTE® 2001 | Specialty Polymers, Inc. | RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal ...voir plus RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal and primer applications. voir moins | |
| RAYKOTE® 2010 | Specialty Polymers, Inc. | RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to...voir plus RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to-metal finishes. RAYKOTE® 2010 can adhere to several different metal surfaces. It is primarily used as a coalescent demanded coating that provides early water resistance and formulated that can meet strict VOC regulations voir moins | |
| RAYKOTE® 444S | Specialty Polymers, Inc. | RAYKOTE® 444S is a styrene acrylic emulsion that is an additive for cement emulsions. This styrene acrylic emulsion is intended to be used as a polymer modifier for cement. RAYKOTE® 444S is compatible with “green” cement to produce flexible concrete patch...voir plus RAYKOTE® 444S is a styrene acrylic emulsion that is an additive for cement emulsions. This styrene acrylic emulsion is intended to be used as a polymer modifier for cement. RAYKOTE® 444S is compatible with “green” cement to produce flexible concrete patches and overlays. This product is primarily used for crack resistance in cement due to its strong bonding properties. This cement admix is to be used indoors and outdoors on commercial, industrial and infrastructures due to the durability. voir moins | |
| RAYPLUS™ 1097 | Specialty Polymers, Inc. | RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and s...voir plus RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and scratch resistance. RAYPLUS™ 1097 has wet block resistance that provides water resistance and allows it to be a concrete sealer. voir moins | |
| RAYPLUS™ 1098 | Specialty Polymers, Inc. | RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resis...voir plus RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resistant to water, UV rays and chemical abrasion. voir moins | |
| RAYREZ® 66 | Specialty Polymers, Inc. | RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial ...voir plus RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial coatings and has a low co-solvent demand. RAYREZ® 66 is primarily used to blend with water reducible alkyds to enhance coating performance and reduce VOC. RAYREZ® 66 provides resistance to chemical abrasion and scratches to surfaces that it is applied to. voir moins | |
| RAYVACE® 331 | Specialty Polymers, Inc. | RAYVACE® 331 is a nonionic/anionic high solid, all-purpose vinyl acrylic emulsion copolymer. This product is intended for industrial and architecture applications. RAYVACE® 331 is mechanically stable and allows a high pigment formulated coatings. It is pr...voir plus RAYVACE® 331 is a nonionic/anionic high solid, all-purpose vinyl acrylic emulsion copolymer. This product is intended for industrial and architecture applications. RAYVACE® 331 is mechanically stable and allows a high pigment formulated coatings. It is primarily used to be applied in rapid drying times in industrial and architectural primer applications. voir moins | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| U-793 | Designer Molecules | U-793 is a brown viscous liquid form, urethane resin. This product yields a tough hydrophobic polymer when cured. U-793 is most commonly used as an adhesion promoter to various substrates. |
