| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...voir plus The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. voir moins | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...voir plus The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. voir moins | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...voir plus Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. voir moins | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...voir plus The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. voir moins | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| Bariflor® 8010 | Minerals Girona S.A. | Bariflor® 8010 has a top cut at 10 μm. It is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. | |
| Bariflor® 8015 | Minerals Girona S.A. | Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density o...voir plus Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density of 4'35g/cm³. voir moins | |
| Bariflor® 8025 | Minerals Girona S.A. | Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density o...voir plus Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density of 4'35g/cm³. voir moins | |
| Bariflor® 8040 | Minerals Girona S.A. | Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...voir plus Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8060 | Minerals Girona S.A. | Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...voir plus Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8080 | Minerals Girona S.A. | Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8410 | Minerals Girona S.A. | Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8415 | Minerals Girona S.A. | Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8425 | Minerals Girona S.A. | Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8440 | Minerals Girona S.A. | Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8460 | Minerals Girona S.A. | Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8480 | Minerals Girona S.A. | Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric a...voir plus Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Barinit® 7025 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7040 | Minerals Girona S.A. | Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7060 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7080 | Minerals Girona S.A. | Barinit® 7080 has an oil absorption DOP of 11g/100g and a top cut of 80µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7080 has an oil absorption DOP of 11g/100g and a top cut of 80µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Baristar® 8810 | Minerals Girona S.A. | Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 8815 | Minerals Girona S.A. | Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 8825 | Minerals Girona S.A. | Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9008 | Minerals Girona S.A. | Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, ...voir plus Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9010 | Minerals Girona S.A. | Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| BARISTAR® 9015 | Minerals Girona S.A. | Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9025 | Minerals Girona S.A. | Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9208 | Minerals Girona S.A. | Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, ...voir plus Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9210 | Minerals Girona S.A. | Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® Zero | Minerals Girona S.A. | Baristar® Zero has an oil absorption DOP of 10g/100g and a top cut of 40µm. Barium sulphate is of high purity and has an excellent grade of brightness. It is specifically designed as a matting agent for the paint industry. | |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
| BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | |
| BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...voir plus BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. voir moins | |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | |
| BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
| BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | |
| BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | |
| BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | |
| BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...voir plus BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. voir moins | |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...voir plus BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. voir moins | |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...voir plus BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| Blanc Roc® Extra | Minerals Girona S.A. | Blanc Roc® Extra has an oil absorption of 18g/100g and a top cut D 98 of 4µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pre...voir plus Blanc Roc® Extra has an oil absorption of 18g/100g and a top cut D 98 of 4µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Extra is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Micro | Minerals Girona S.A. | Blanc Roc® Micro has an oil absorption of 17g/100g and a top cut D 98 of 5µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems re...voir plus Blanc Roc® Micro has an oil absorption of 17g/100g and a top cut D 98 of 5µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Micro is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Normal | Minerals Girona S.A. | Blanc Roc® Normal has an oil absorption of 13g/100g and a top cut D 98 of 20µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems ...voir plus Blanc Roc® Normal has an oil absorption of 13g/100g and a top cut D 98 of 20µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Normal is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Plus | Minerals Girona S.A. | Blanc Roc® Plus has an oil absorption of 15g/100g and a top cut D 98 of 8µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate prec...voir plus Blanc Roc® Plus has an oil absorption of 15g/100g and a top cut D 98 of 8µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Plus is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Super | Minerals Girona S.A. | Blanc Roc® Super has an oil absorption of 14g/100g and a top cut D 98 of 10µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pr...voir plus Blanc Roc® Super has an oil absorption of 14g/100g and a top cut D 98 of 10µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Super is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Ultramicro | Minerals Girona S.A. | Blanc Roc® Ultramicro has an oil absorption of 19g/100g and a top cut D 98 of 3µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphat...voir plus Blanc Roc® Ultramicro has an oil absorption of 19g/100g and a top cut D 98 of 3µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Ultramicro is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Xtrem | Minerals Girona S.A. | Blanc Roc® Xtrem has an oil absorption of 21g/100g and a top cut D 98 of 1µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pre...voir plus Blanc Roc® Xtrem has an oil absorption of 21g/100g and a top cut D 98 of 1µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Xtrem is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...voir plus DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. voir moins | |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...voir plus DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. voir moins | |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...voir plus DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. |
