| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...voir plus The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. voir moins | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...voir plus The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. voir moins | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...voir plus Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. voir moins | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...voir plus The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. voir moins | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| Bariflor® 8010 | Minerals Girona S.A. | Bariflor® 8010 has a top cut at 10 μm. It is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. | |
| Bariflor® 8015 | Minerals Girona S.A. | Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density o...voir plus Bariflor® 8015 is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 14g/100g and a density of 4'35g/cm³. voir moins | |
| Bariflor® 8025 | Minerals Girona S.A. | Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density o...voir plus Bariflor® 8025 is a barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. It has an oil absorption DOP of 13g/100g and a density of 4'35g/cm³. voir moins | |
| Bariflor® 8040 | Minerals Girona S.A. | Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...voir plus Bariflor® 8040 has an oil absorption DOP of 12g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8060 | Minerals Girona S.A. | Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmosph...voir plus Bariflor® 8060 has an oil absorption DOP of 11g/100g and a density of 4'35g/cm³. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8080 | Minerals Girona S.A. | Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8080 has an oil absorption DOP of 10g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8410 | Minerals Girona S.A. | Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8410 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8415 | Minerals Girona S.A. | Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8415 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8425 | Minerals Girona S.A. | Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8425 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8440 | Minerals Girona S.A. | Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8440 has an oil absorption DOP of 11g/100g and a top cut of 40µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8460 | Minerals Girona S.A. | Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric ...voir plus Bariflor® 8460 has an oil absorption DOP of 10g/100g and a top cut of 60µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Bariflor® 8480 | Minerals Girona S.A. | Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric a...voir plus Bariflor® 8480 has an oil absorption DOP of 9g/100g and a top cut of 80µm. It is a Barium sulphate (Baryte) of high purity for use in systems where a high grade of brightness is not required, but calls for inertia and resistance to acids and atmospheric agents. voir moins | |
| Barinit® 7025 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7025 has an oil absorption DOP of 14g/100g and a top cut of 30µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7040 | Minerals Girona S.A. | Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7040 has an oil absorption DOP of 13g/100g and a top cut of 40µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7060 | Minerals Girona S.A. | Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7025 has an oil absorption DOP of 12g/100g and a top cut of 60µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Barinit® 7080 | Minerals Girona S.A. | Barinit® 7080 has an oil absorption DOP of 11g/100g and a top cut of 80µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric ag...voir plus Barinit® 7080 has an oil absorption DOP of 11g/100g and a top cut of 80µm. It is a Barium Sulphate of good quality, for use in systems where the degree of brightness is not of importance. Its high specific weight and resistance to acids and atmospheric agents make it a suitable product for industrial production of adhesives, putties, sound proofing and friction. voir moins | |
| Baristar® 8810 | Minerals Girona S.A. | Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8810 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 8815 | Minerals Girona S.A. | Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8815 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 8825 | Minerals Girona S.A. | Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 8825 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9008 | Minerals Girona S.A. | Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, ...voir plus Baristar® 9008 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9010 | Minerals Girona S.A. | Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9010 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| BARISTAR® 9015 | Minerals Girona S.A. | Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9015 has an oil absorption DOP of 13g/100g and a top cut of 20µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9025 | Minerals Girona S.A. | Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9025 has an oil absorption DOP of 12g/100g and a top cut of 30µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9208 | Minerals Girona S.A. | Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, ...voir plus Baristar® 9208 has an oil absorption DOP of 15g/100g and a top cut of 8µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® 9210 | Minerals Girona S.A. | Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers,...voir plus Baristar® 9210 has an oil absorption DOP of 14g/100g and a top cut of 10µm. It is a Barium sulphate (Baryte) of high purity with excellent grade of brightness. Its absolute chemical stability makes it an appropriate product for coatings, paints, polymers, plastics, PVC, polyurethanes, elastomer and rubber industries. voir moins | |
| Baristar® Zero | Minerals Girona S.A. | Baristar® Zero has an oil absorption DOP of 10g/100g and a top cut of 40µm. Barium sulphate is of high purity and has an excellent grade of brightness. It is specifically designed as a matting agent for the paint industry. | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| Blanc Roc® Extra | Minerals Girona S.A. | Blanc Roc® Extra has an oil absorption of 18g/100g and a top cut D 98 of 4µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pre...voir plus Blanc Roc® Extra has an oil absorption of 18g/100g and a top cut D 98 of 4µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Extra is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Micro | Minerals Girona S.A. | Blanc Roc® Micro has an oil absorption of 17g/100g and a top cut D 98 of 5µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems re...voir plus Blanc Roc® Micro has an oil absorption of 17g/100g and a top cut D 98 of 5µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Micro is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Normal | Minerals Girona S.A. | Blanc Roc® Normal has an oil absorption of 13g/100g and a top cut D 98 of 20µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems ...voir plus Blanc Roc® Normal has an oil absorption of 13g/100g and a top cut D 98 of 20µm. Natural barium sulphate is of high purity and extraordinary brightness with the properties of the precipitated Barium Sulphate, is an excellent extender to be used in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Normal is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Plus | Minerals Girona S.A. | Blanc Roc® Plus has an oil absorption of 15g/100g and a top cut D 98 of 8µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate prec...voir plus Blanc Roc® Plus has an oil absorption of 15g/100g and a top cut D 98 of 8µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Plus is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Super | Minerals Girona S.A. | Blanc Roc® Super has an oil absorption of 14g/100g and a top cut D 98 of 10µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pr...voir plus Blanc Roc® Super has an oil absorption of 14g/100g and a top cut D 98 of 10µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Super is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Ultramicro | Minerals Girona S.A. | Blanc Roc® Ultramicro has an oil absorption of 19g/100g and a top cut D 98 of 3µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphat...voir plus Blanc Roc® Ultramicro has an oil absorption of 19g/100g and a top cut D 98 of 3µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Ultramicro is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| Blanc Roc® Xtrem | Minerals Girona S.A. | Blanc Roc® Xtrem has an oil absorption of 21g/100g and a top cut D 98 of 1µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate pre...voir plus Blanc Roc® Xtrem has an oil absorption of 21g/100g and a top cut D 98 of 1µm. Natural barium sulphate is of high purity and extraordinary brightness. The latest generation micronising processes give this product range the properties of Barium Sulphate precipitate, making it an excellent extender in systems requiring unsurpassable inertia and physical and chemical resistance. Blanc Roc® Xtrem is an ideal product range to satisfy the requirements of the wide variety of industrial applications. High content of BaSO4 is guaranteed by a system of enrichment complying with the strict regulations in force for protection of the environment. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Dolkron® Extra | Minerals Girona S.A. | Dolkron® Extra is a calcium magnesium carbonate, with great whiteness and fineness, making it an excellent extender for use in the industry of polymers and paints. It has an oil absorption of 25g/100g and a top cut of 20µm. | |
| Dolkron® Pulver | Minerals Girona S.A. | Dolkron® Pulver is a calcium magnesium carbonate Dolomite filler, with great whiteness and fineness, making it an excellent extender for use in the industry of polymers and paints. It has an oil absorption of 17g/100g and a top cut of 80µm. | |
| Dolkron® Super | Minerals Girona S.A. | Dolkron® Super is a calcium magnesium carbonate Dolomite filler, with great whiteness and fineness, making it an excellent extender for use in the industry of polymers and paints. It has an oil absorption of 50g/100g and a top cut of 20µm. | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...voir plus Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. voir moins | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...voir plus A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. voir moins | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...voir plus Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. voir moins | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...voir plus Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. voir moins | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...voir plus Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. voir moins | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...voir plus Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. voir moins | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...voir plus Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. voir moins | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...voir plus Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. voir moins | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. voir moins | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...voir plus Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. voir moins | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. voir moins | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. voir moins | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...voir plus Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. voir moins | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...voir plus Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. voir moins | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...voir plus Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. voir moins | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...voir plus Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...voir plus Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...voir plus Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. voir moins | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. voir moins | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...voir plus Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. voir moins | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...voir plus Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. voir moins | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...voir plus A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. voir moins | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...voir plus Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. voir moins | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...voir plus Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. voir moins |
