| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| SILZOT® FS-X1 | AlzChem | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...voir plus SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. voir moins | |
| Silzot® HQ plus (Powder) | AlzChem | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. |
