Chlorinated PVC-YURON CPVC | Yuron New Material | Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...voir plus Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. voir moins | |
Chlorinated Rubber-YURON CR-130 | Yuron New Material | YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...voir plus YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. voir moins | |
Chlorinated Rubber-YURON CR-170 | Yuron New Material | YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...voir plus YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. voir moins | |
Chlorinated Rubber-YURON CR-22 | Yuron New Material | YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. | |
Chlorinated Rubber-YURON CR-40 | Yuron New Material | YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins. | |
Chlorinated Rubber-YURON CR-400 | Yuron New Material | YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...voir plus YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. voir moins | |
Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins. | |
CRYSTAZENE 110 | DRT (Les Derives Resiniques et Terpeniques) | CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, a...voir plus CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, and for plastic film modification. voir moins | |
DERCOLYTE A 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin especially recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
DERCOLYTE A 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
DERCOLYTE LTG | DRT (Les Derives Resiniques et Terpeniques) | Issue de la polymérisation des terpènes, la DERCOLYTE LTG est une résine tackifiante de bas point de ramollissement, à faible taux de COV, recommandée pour plastifier et améliorer l’adhésion de certaines formules d’adhésifs sensibles à la pression. | |
DERCOLYTE S 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
DERCOLYTE S 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE S 125 is a tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
DERCOLYTE TS 105 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
DERCOLYTE TS 95 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 95 is produced from the polymerisation of terpene and styrene. It is a light coloured tackifying resin showing excellent adhesive performances with block copolymers. | |
DERMULSENE 222 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on terpene and stabilized rosin ester. It is designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
DERMULSENE DEG | DRT (Les Derives Resiniques et Terpeniques) | It is an aqueous, solvent free resin based on diethyleneglycol resin. | |
DERMULSENE HBR 509 | DRT (Les Derives Resiniques et Terpeniques) | Le DERMULSENE HBR 509 est une dispersion sans solvant à base de colophane et de résine pétrolière. | |
DERMULSENE HBR 70 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a hybrid rosin/hydrocarbon resin. It is designed specifically to tackify and wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
DERMULSENE RA 702 | DRT (Les Derives Resiniques et Terpeniques) | DERMULSENE RA 702 is an aqueous, solvent free resin based on stabilized rosin. It is recommended for contact adhesives, building and industrial adhesives. | |
DERMULSENE RE 802 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a stabilized rosin ester. It is designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
DERMULSENE TR 602 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous resin dispersion based on a terpene phenolic resin. It is specifically designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
DERTOLINE G2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with glycerol. It is a tackifying resin particularly recommended for hot melt adhesives based on EVA or block copolymers. | |
DERTOLINE P2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with pentaerythritol. It is a tackifying resin mainly recommended for hot melt adhesives based on EVA copolymers. | |
DERTOLINE PLS | DRT (Les Derives Resiniques et Terpeniques) | A highly stabilized tall oil rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or block copolymers. | |
DERTOPHENE H 150 | DRT (Les Derives Resiniques et Terpeniques) | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
DERTOPHENE T | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It is used to improve the properties of hot melt or solvent based adhesives. | |
DERTOPHENE T 105 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It improves the properties of hot melt or solvent adhesives. | |
DERTOPHENE T 115 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers. It is suitable for use in solvent based and hot melt based adhesives. | |
FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins | |
GRANOLITE G | DRT (Les Derives Resiniques et Terpeniques) | This is a light-colored and deodorised gum rosin esterified with glycerol. | |
GRANOLITE G 105 | DRT (Les Derives Resiniques et Terpeniques) | Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications. | |
GRANOLITE P | DRT (Les Derives Resiniques et Terpeniques) | It is a light-colored and deodorised resin suitable in various adhesive and road marking Hot Melt formulations. | |
GRANOLITE P 118 | DRT (Les Derives Resiniques et Terpeniques) | It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations. | |
GRANOLITE SG | DRT (Les Derives Resiniques et Terpeniques) | It is a glycerol ester of stabilized rosin, deodorized. | |
GRANOLITE TEG | DRT (Les Derives Resiniques et Terpeniques) | A modified triethyleneglycol ester of rosin. It is used in adhesives, mainly for floor covering formulations. | |
High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...voir plus YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. voir moins | |
High Chlorinated Polyethylene-YURON HCPE-H (A) | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high mole...voir plus High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC adhesives, bond metal materials. and can be used as an adhesive in the fiber industry. voir moins | |
High Performance High Chlorinated Polyethylene-YURON HPE 2200 | Yuron New Material | YURON HPE 2200 is a high performance high chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to produce high grade adhesives. | |
HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...voir plus NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. voir moins | |
PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
PROPOLDER™ MPP2060 | Polygroup Inc. | PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
PROPOLDER™ MPP2080 | Polygroup Inc. | PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
PROPOLDER™ MPP2100 | Polygroup Inc. | PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins |