Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and hom...voir plus
Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and homogeneously disperses other particles in liquid systems creating a very stable mixture yet enables higher loadings of solids without increasing viscosity. Acti-Gel 208 additive can be a simple fix for syneresis, pigment float & flooding and sedimentation problems in a wide range of water-based coatings. Its low dosage, and extremely low residue makes it a quick “post-add” solution for stability problems in existing coating formulas without changing its rheology, paint formula or packaging label. voir moins
Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our h...voir plus
Acti-Min® PG air-float kaolin is a carefully produced, high quality, pigment extender designed for the paint industry. It provides desirable performance advantages in gloss and sheen control, enamel holdout, anti-settling, and sanding properties. As our highest brightness product, Acti-Min® PG product can be a lbs-for-lbs direct replacement for higher cost water-washed kaolin products in coatings and similar applications. Its very fine and narrow particle size distribution in the 0.25 to 0.4 micron range has shown to be more effective at TiO2 extension in latex paint than standard water-washed kaolin grades. voir moins
Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...voir plus
Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. voir moins
Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This prod...voir plus
Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This product is insoluble in water and has a mild odor. Its boiling point is approximately 320 degrees Fahrenheit, and contains 22-23% solids. voir moins
Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...voir plus
Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. voir moins
Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...voir plus
Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. voir moins
Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities.
Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- ...voir plus
Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- 1.0. It has a boiling point of 100 degrees Celsius and contains 46-48% solids. voir moins
Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent,...voir plus
Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent, and emulsifying agent. Uses include hard surface cleaners, household and industrial cleaners, concentrated detergent, and textile applications. 50% actives. Acceptable for alkaline, acidic, and neutral pH formulations. voir moins
Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, h...voir plus
Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, hard surface cleaning, concentrated liquid, low foaming detergent, carpet care and maintenance, industrial cleaning, clean-in-place detergent, dry cleaning and car wash applicaitons. . voir moins
Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This ...voir plus
Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This product has a pH of 7.0 +/- 1.0 in a 10% aqueous solution and a boiling point of 100 degrees Celsius. voir moins
Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiw...voir plus
Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiwet™ NF is used in floor polish and stipper, carpeet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. voir moins
Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...voir plus
Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. voir moins
Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 ...voir plus
Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 and 8.0 and is soluble in water. Its boiling point is approximately 100 degrees Celsius. voir moins
Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal l...voir plus
Min-U-Gel® attapulgite thixotropic thickener is highly suited for low-shear rheology control (flow & leveling, sag control, spatter resistance and more) in a wide range of liquid systems. It is a reliable stabilizer that is derived from unique colloidal lathe-shaped particles forming a very stable lattice structure that keeps liquids and particles more evenly dispersed and suspended. The uniformity it creates generates unique multi-functional performance benefits well beyond rheological properties, such as syneresis control, suspension, improved tint strength and hiding, reduced pigment flooding and in-can stability. voir moins
Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...voir plus
Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. voir moins
Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...voir plus
Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. voir moins
Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...voir plus
Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. voir moins
Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...voir plus
Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. voir moins
Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...voir plus
Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. voir moins
Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...voir plus
Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. voir moins
Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...voir plus
Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. voir moins
Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...voir plus
Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. voir moins
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
Désolé mais l'industrie que vous avez sélectionnée n'est pas disponible actuellement dans votre langue. Vous pouvez choisir une des langues ci-dessous pour sélectionner l'industrie ou sinon fermer cette fenêtre.