| Flexipel S-11WS | Innovative Chemical Technologies, Inc. | Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...voir plus Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. voir moins | Request Sample |
| Flexipel S-22WS | Innovative Chemical Technologies, Inc. | Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This prod...voir plus Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This product is insoluble in water and has a mild odor. Its boiling point is approximately 320 degrees Fahrenheit, and contains 22-23% solids. voir moins | Request Sample |
| Flexisperse™ 133N | Innovative Chemical Technologies, Inc. | Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...voir plus Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. voir moins | Request Sample |
| Flexisperse™ 134NH | Innovative Chemical Technologies, Inc. | Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...voir plus Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. voir moins | Request Sample |
| Flexisperse™ 225 | Innovative Chemical Technologies, Inc. | Flexisperse™ 225 is a methacrylic acid polymer (9000 M.Wt.) which is a highly effective dispersant, anti-scalant, deflocculent, and rheology modifier. Produces stable dispersions and suspensions at high concentrations, with lower viscosities. | Request Sample |
| Flexisperse™ CA-47 | Innovative Chemical Technologies, Inc. | Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- ...voir plus Flexisperse™ CA-47, in the form of a milky white liquid emulsion, is an anionic acrylic polymer dispersion designed for modifying Portland cement-based mortars and basement waterproof coatings. This product is dispersible in water and has a pH of 9.5 +/- 1.0. It has a boiling point of 100 degrees Celsius and contains 46-48% solids. voir moins | Request Sample |
| Flexisurf™ EHDP | Innovative Chemical Technologies, Inc. | Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent,...voir plus Flexisurf™ EHDP is an amphoteric biobased surfactant which is a hydrotrope for compatibilizing nonionic surfactants in high electrolyte formulations. Salt-free and works in hard or soft water. It functions as a wetting agent, cleansing agent, detergent, and emulsifying agent. Uses include hard surface cleaners, household and industrial cleaners, concentrated detergent, and textile applications. 50% actives. Acceptable for alkaline, acidic, and neutral pH formulations. voir moins | Request Sample |
| Flexisurf™ EHS-40 | Innovative Chemical Technologies, Inc. | Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, h...voir plus Flexisurf™ EHS-40 is a clear, light amber anionic liquid surfactant. That is 40% active Ammonium 2-Ethylhexyl sulfate in water. This product contributes low foam, cleansing and solubilizing properties. Flexisurf™ EHS-40 can be used in paint and coating, hard surface cleaning, concentrated liquid, low foaming detergent, carpet care and maintenance, industrial cleaning, clean-in-place detergent, dry cleaning and car wash applicaitons. . voir moins | Request Sample |
| Flexisurf™ LDP | Innovative Chemical Technologies, Inc. | Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This ...voir plus Flexisurf™ LDP, in the form of a clear, light amber liquid, is an amphoteric surfactant that can be used in electroplating applications. This product is composed of sodium lauriminidipropionate in a 30:70 ratio with water, and is soluble in water. This product has a pH of 7.0 +/- 1.0 in a 10% aqueous solution and a boiling point of 100 degrees Celsius. voir moins | Request Sample |
| Flexiwet™ NF | Innovative Chemical Technologies, Inc. | Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiw...voir plus Flexiwet™ NF, in the form of a clear to slightly hazy, colorless to pale amber liquid surfactant with a pH of 2.5 +/-.5. This product is a non-foaming anionic fluorosurfactant, with wetting properties. It functions as a defoamer in anionic systems. Flexiwet™ NF is used in floor polish and stipper, carpeet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. voir moins | Request Sample |
| Flexiwet™ NF-80 | Innovative Chemical Technologies, Inc. | Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used...voir plus Flexiwet™ NF-80, in the form of an off-white to brown, viscous anionic fluorosurfactant emulsion. That pastes upon standing. This product has wetting properties and functions as a defoamer. It also provides anti-soiling properties. Flexiwet™ NF-80 is used in floor polish and stripper, carpet extraction and spot cleaning, paint and coating, caustic bottle washing and acid/bleach based cleaning applications. voir moins | Request Sample |
| Flexiwet™ RFS-20A | Innovative Chemical Technologies, Inc. | Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 ...voir plus Flexiwet™ RFS-20A, in the form of a clear, colorless to pale yellow liquid, is a partially fluorinated anionic surfactant that can be used as a wetting agent for polishes, coating and hard surface cleaning applications. This product has a pH between 6.0 and 8.0 and is soluble in water. Its boiling point is approximately 100 degrees Celsius. voir moins | Request Sample |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...voir plus ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. voir moins | Request Sample |
| ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...voir plus ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. voir moins | Request Sample |
| ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...voir plus ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. voir moins | Request Sample |
| ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...voir plus ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. voir moins | Request Sample |
| ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...voir plus ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). voir moins | Request Sample |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...voir plus ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. voir moins | Request Sample |
| ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...voir plus ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. voir moins | Request Sample |
| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...voir plus ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. voir moins | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...voir plus ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. voir moins | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...voir plus ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. voir moins | Request Sample |
| ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...voir plus ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). voir moins | Request Sample |
| ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...voir plus ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. voir moins | Request Sample |
| ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...voir plus ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. voir moins | Request Sample |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...voir plus RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. voir moins | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...voir plus RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. voir moins | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...voir plus RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. voir moins | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...voir plus RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. voir moins | Request Sample |
| RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...voir plus RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. voir moins | Request Sample |
| Thetawet™ FS-8000 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...voir plus Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. voir moins | Request Sample |
| Thetawet™ FS-8020DB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial ...voir plus Thetawet™ FS-8020DB, in the form of a clear to slightly hazy, colorless to pale yellow liquid, is a short-chain anionic fluorinated surfactant with moderate foaming qualities that can be used in automotive finishes and coatings, adhesives, and industrial or architectural paints and coatings. This product is soluble in water and has a pH of 5.5 +/- 1.0 in a 5% aqueous solution. voir moins | Request Sample |
| Thetawet™ FS-8020EB | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This produ...voir plus Thetawet™ FS-8020EB, in the form of a clear to slightly hazy, pale yellow liquid, is an anionic fluorinated surfactant that can be used in adhesives, lacquers, polishes, automotive finishes, and industrial or architectural paints and coatings. This product is soluble in water and has low-foaming properties. It has a pH of 4.5 +/- 1.5 in a 5% aqueous solution. voir moins | Request Sample |
| Thetawet™ FS-8050 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1...voir plus Thetawet™ FS-8050, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealants. This product has 50% active ingredients and is soluble in water. It has a pH of 6.0 +/- 1.0 in a 1% aqueous solution, and a boiling point of approximately 100 degrees Celsius. voir moins | Request Sample |
| Thetawet™ FS-8100 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution...voir plus Thetawet™ FS-8100, in the form of an amber semi-solid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks, and sealants. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a melting point under 55 degrees Celsius. voir moins | Request Sample |
| Thetawet™ FS-8150 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aq...voir plus Thetawet™ FS-8150, in the form of an amber liquid, is a nonionic fluorinated surfactant that can be used in paints, coatings, inks, adhesives, caulks and sealant applications. This product is sparingly water soluble and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. It has a boiling point of approximately 100 degrees Celsius and is designed for use in VOC-sensitive systems. voir moins | Request Sample |
| Thetawet™ FS-8200 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contai...voir plus Thetawet™ FS-8200, in the form of a tan to light brown waxy solid, is an anionic fluorinated surfactant that can be used in adhesives, caulks and sealants, and industrial or architectural paints and coatings. This product is insoluble in water and contains 100% active ingredients. It has a pH of 2.5 to 4.0, and a melting point between 55 and 65 degrees Celsius. voir moins | Request Sample |
| Thetawet™ FS-8250 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in w...voir plus Thetawet™ FS-8250, in the form of an amber emulsion, is an anionic fluorinated surfactant with low foaming properties that can be used in industrial or architectural paints and coatings, automotive finishes, and adhesives. This product is dispersible in water and contains 28% active ingredients. It has a pH of 9.0 +/- 1.0 and a boiling point of 100 degrees Celsius. voir moins | Request Sample |
