| Anhydrous TMEDA | Buckman Laboratories, Inc. | Anhydrous N,N,N1,N1,-Tetramethylethylenediamine (ATMEDA) is a difunctional tertiary amine used as a chemical intermediate in the manufacture of rubber compounds and antimicrobial quaternary ammonium copolymers. This product is clear, colorless to pale yel...voir plus Anhydrous N,N,N1,N1,-Tetramethylethylenediamine (ATMEDA) is a difunctional tertiary amine used as a chemical intermediate in the manufacture of rubber compounds and antimicrobial quaternary ammonium copolymers. This product is clear, colorless to pale yellow in appearance and exhibits a strong amine or fishy odor. voir moins | |
| BL-693 | Buckman Laboratories, Inc. | BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This...voir plus BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This product will consistently reduce friability in foam applications. The product also has the potential to act as a curing catalyst at higher use levels. Buckman recommends testing BL-693 to determine the appropriate use level for each foam system. voir moins | |
| BSC™ 8007 | Buckman Laboratories, Inc. | BSC™ 8007 is 100% solids, zero VOC, nonionic dispersant for solvent-based coatings, tint pastes, and adhesives. It has the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges, as well as various carbon blac...voir plus BSC™ 8007 is 100% solids, zero VOC, nonionic dispersant for solvent-based coatings, tint pastes, and adhesives. It has the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges, as well as various carbon black pigments. The nonionic nature of this product makes it compatible in a wide range of coatings vehicles, allowing for ease of formulation. voir moins | |
| BSI® 189 | Buckman Laboratories, Inc. | BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus ot...voir plus BSI® 189 is a highly effective sodium polyacrylate dispersant for use in water-based coatings, tint pastes, adhesives, caulks, grouts, and sealants. It has been shown to minimize flocculation and has less of an adverse effect on in-can corrosion versus other sodium polyacrylates. This product is a 40% active greener alternative dispersing agent for water-based systems, and is zero VOC, low odor, and approved under FDA (21 CFR) 176.170. voir moins | |
| Bubond® 396 | Buckman Laboratories, Inc. | Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration ...voir plus Bubond® 396 is an organic stain-blocking agent in liquid form. It is used in coatings that are applied over staining woods, such as cedar and redwood. By preventing wood extractives from bleeding through the paint films, Bubond® 396 reduces discoloration commonly known as “tannin staining.” Bubond® 396 can be post added to the coating or added in the letdown. In formulations that are pH-adjusted to the alkaline side, Bubond® 396 should preferably be added prior to neutralization since the product is acidic in nature and could cause pH shock if added directly into an alkaline system. voir moins | |
| Bubreak® 401 | Buckman Laboratories, Inc. | Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based s...voir plus Bubreak® 401 is a concentrated liquid, highly cationic polymer that can be used as a flocculant or coagulant in effluent treatment programs. Bubreak 401 can be used in waste minimization programs for water-based paints, adhesives, or similar water-based systems. A 10% (by weight) solution of Bubreak 401 should be made prior to application of this product. This product is readily soluble in water and this reduction allows the polymer to “unwind” to provide better flocculating properties. Use levels of this solution will vary from .01% to 2.0%, based on weight of the material to be treated. voir moins | |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...voir plus Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. voir moins | |
| Bubreak® 4419 | Buckman Laboratories, Inc. | Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances app...voir plus Bubreak® 4419 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product contains no silicone or silica and is effective over a wide pH range. Bubreak® 4419 is composed of substances approved for use under 21 CFR § 176.200 and 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water- and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4419 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. The product has proven effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. voir moins | |
| Bubreak® 4479 | Buckman Laboratories, Inc. | Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam ...voir plus Bubreak® 4479 is a defoamer concentrate. The product provides efficient foam control in a variety of situations, including acidic or alkaline systems, and over a broad range of conditions. Buckman recommends testing various levels to ensure adequate foam protection. However, as with most defoamers, excessive amounts should be avoided. Bubreak® 4479 disperses readily in water and can be used without prior dilution. However, it is acceptable to dilute the product with water before use. For best results, add the concentration of around 10%. voir moins | |
| Bubreak® 448 | Buckman Laboratories, Inc. | Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric...voir plus Bubreak® 448 is an antifoam and defoamer for use in water-thinned paints and coatings, glues, polyester spray and gel coatings. It is composed of substances that have been allowed for use under 21 CFR § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings) of the U.S. Food and Drug Administration regulations. Bubreak® 448 can be dispensed directly from shipping containers by chemical-metering pumps or suitable measuring containers. To prevent deterioration of the product, keep drum closed when not in use. Contamination with water or other extraneous materials should be avoided. For the best control of foam, Bubreak® 448 should be added as near to the point of foam formation as possible. It should also be added where there is vigorous mixing action. voir moins | |
| Bubreak® 4480 | Buckman Laboratories, Inc. | Bubreak® 4480 is a proprietary, water-based defoaming agent that is effective in promoting excellent foam control. This product does not contain any petroleum oils or hydrocarbons nor does it contain any amide-based products. Buckman recommends testing va...voir plus Bubreak® 4480 is a proprietary, water-based defoaming agent that is effective in promoting excellent foam control. This product does not contain any petroleum oils or hydrocarbons nor does it contain any amide-based products. Buckman recommends testing various levels to ensure adequate foam protection. However, as with most defoamers, excessive amounts should be avoided. voir moins | |
| Bubreak® 453 | Buckman Laboratories, Inc. | Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by ...voir plus Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by the U.S. Food and Drug Administration under Title 21 of the Code of Federal Regulations, § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings). voir moins | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...voir plus Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. voir moins | |
| Bufloc® 528 | Buckman Laboratories, Inc. | Bufloc® 528 is a heavy metal precipitant used to remove metals from wastewater streams. It is particularly useful in the treatment of wastewater from paint production. The product is effective over a wide pH range and, when used as recommended, provides n...voir plus Bufloc® 528 is a heavy metal precipitant used to remove metals from wastewater streams. It is particularly useful in the treatment of wastewater from paint production. The product is effective over a wide pH range and, when used as recommended, provides nearly complete precipitation of metals, even in the presence of other chelating or sequestering agents. The sludge cake produced from its use as a heavy metal precipitant is compact, highly insoluble, and easily dewatered. voir moins | |
| Bufloc® 590 | Buckman Laboratories, Inc. | Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufl...voir plus Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufloc® 590 is a water-in-oil emulsion that must be diluted with water before use. This product should be made down to a dilution of 0.2%–1.0% prior to feeding using a suitable polymer make-down system. Dilutions of polymers should be used within 24 hours of inversion. The recommended feedrate for Bufloc® 590 for clarification applications is 0.25–5.0 ppm. Sludge dewatering applications may require much higher dosages. voir moins | |
| Bulab® 600 | Buckman Laboratories, Inc. | Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is s...voir plus Bulab® 600 is a special grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) (98.5%) for use as a catalyst in polyurethane foam. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 600 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amines or tin catalysts. voir moins | |
| Bulab® 685 | Buckman Laboratories, Inc. | Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water ...voir plus Bulab® 685 is an 85% active grade of N,N,N1,N1-tetramethylethylenediamine (TMEDA) for use as a catalyst in water-blown polyurethane foam. TMEDA is a difunctional tertiary amine with little steric hindrance. It is a catalyst for the reaction between water and isocyanate in both flexible and rigid polyurethane foams. Bulab® 685 is soluble in water and is readily miscible with all components of urethane systems. It has a low residual odor and does not interfere with the activity of other amine or tin catalysts. voir moins | |
| Bulab® Flamebloc | Buckman Laboratories, Inc. | Bulab® Flamebloc (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc will provide char formation and subsequent smoke suppression. This produ...voir plus Bulab® Flamebloc (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc will provide char formation and subsequent smoke suppression. This product is recommended for applications with stringent smoke requirements. It performs best when used as a synergist with halogen containing compounds. In many applications, Bulab® Flamebloc can be used as a partial or total replacement for antimony based compounds. Substitution of Bulab® Flamebloc for antimony trioxide in fire retardant products can provide the following benefits: raw material cost savings, reduced smoke, improved resistance to flameless combustion (afterglow suppression), and reduced toxicity of fumes emitted during combustion. voir moins | |
| Bulab® Flamebloc® 381 | Buckman Laboratories, Inc. | Bulab® Flamebloc® 381 is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It can be used as a partial or total replacement for antimony-based compounds. | |
| Bulab® Flamebloc 428 | Buckman Laboratories, Inc. | Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc...voir plus Bulab® Flamebloc 428 (calcium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. It contains no lead, barium, zinc, or other regulated heavy metals. Since it is borate based, Bulab® Flamebloc 428 will provide char formation and subsequent smoke suppression. This fine particle size material is easily incorporated into a formulation with maximum dispersibility. Bulab® Flamebloc 428 is recommended for applications with stringent smoke requirements. The product performs best when used as a synergist with halogen-containing compounds. In many applications, Bulab® Flamebloc 428 can be used as a partial replacement for antimony-based compounds. voir moins | |
| Bulab® Flamebloc 440 | Buckman Laboratories, Inc. | Bulab® Flamebloc 440 (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc 440 will provide char formation and subsequent smoke suppression. Th...voir plus Bulab® Flamebloc 440 (barium metaborate) is a fire retardant and smoke suppressant for use in plastics, paints, textiles, and rubber compounds. Since it is borate based, Bulab® Flamebloc 440 will provide char formation and subsequent smoke suppression. This fine particle size material is easily incorporated into a formulation with maximum dispersibility. Bulab® Flamebloc 440 is recommended for applications with stringent smoke requirements. The product performs best when used as a synergist with halogen-containing compounds. In many applications, Bulab® Flamebloc 440 can be used as a partial replacement for antimony-based compounds. voir moins | |
| Busan® 1009 | Buckman Laboratories, Inc. | Busan® 1009 is a liquid microbicide combining the effectiveness of Methylene bis(thiocyanate) and 2-(Thiocyanomethylthio)benzothiazole for a broad spectrum of activity against both bacteria and fungi. It is also used in caulking compounds, sealants, and a...voir plus Busan® 1009 is a liquid microbicide combining the effectiveness of Methylene bis(thiocyanate) and 2-(Thiocyanomethylthio)benzothiazole for a broad spectrum of activity against both bacteria and fungi. It is also used in caulking compounds, sealants, and adhesives for protection against microbial degradation. This product is recommended for addition to clear and pigmented coatings to protect wood from fungal staining and decay and to prevent mold growth on the surface of the coating. The coating may be either solvent- or water-based. Busan® 1009 can be added to solvent systems prior to combining with the nonvolatiles, or it can be postadded to the finished solvent- or water-based coating. voir moins | |
| Busan® 1030 | Buckman Laboratories, Inc. | Busan® 1030 is a microbicide concentrate used as a preservative for caulking sealants and vinyl acetate wallcovering adhesives. The addition of Busan® 1030 to those products will inhibit the growth of fungi (mold, “mildew”) that often cause the discolorat...voir plus Busan® 1030 is a microbicide concentrate used as a preservative for caulking sealants and vinyl acetate wallcovering adhesives. The addition of Busan® 1030 to those products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, unsightly appearance, and degradation of the compounds, particularly when they are exposed to humid environments. Busan® 1030 is especially recommended for the protection of caulking sealants intended for use around bathtubs, showers, bathroom tiles, and vinyl acetate adhesives used on fabrics and paper for covering walls. voir moins | |
| Busan® 1058 | Buckman Laboratories, Inc. | Busan® 1058 is a 24% solution of Tetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione. The product is an effective preservative for pigment slurries of high or low viscosity suspension, including those based on aluminum silicate (clay), calcium carbonate...voir plus Busan® 1058 is a 24% solution of Tetrahydro-3,5-dimethyl-2H-1,3,5-thiadiazine-2-thione. The product is an effective preservative for pigment slurries of high or low viscosity suspension, including those based on aluminum silicate (clay), calcium carbonate, and titanium dioxide. Busan® 1058 is composed of substances that have been allowed by the U.S. Food and Drug Administration for use in the manufacture of coated and uncoated paper and paperboard intended for food contact applications under 21 CFR § 176.230 and 176.300. Busan® 1058 has been tested against a large number of microorganisms, including those most frequently isolated from microbiologically contaminated or deteriorated pigment slurries. voir moins | |
| Busan® 1059 | Buckman Laboratories, Inc. | Busan® 1059 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It is approved for use under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-b...voir plus Busan® 1059 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It is approved for use under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059 has been specifically designed to provide protection against this type of bacterial attack. The concentration of Busan® 1059 required to prevent bacterial attack of emulsion paints will vary depending on a number of factors, including but not limited to: type and condition of raw materials used, microbial condition of the water used, pH of the paint, level of microbial contamination introduced to a particular batch, and cleanliness of the manufacturing facility and equipment. voir moins | |
| Busan® 1059-WS | Buckman Laboratories, Inc. | Busan® 1059-WS is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It has been packaged in 1-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food an...voir plus Busan® 1059-WS is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. It has been packaged in 1-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059-WS has been specifically designed to provide protection against this type of bacterial attack voir moins | |
| Busan® 1059WS-4 | Buckman Laboratories, Inc. | Busan® 1059WS-4 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. This product has been packaged in 1/4-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the...voir plus Busan® 1059WS-4 is a broad-spectrum bactericide recommended for use in coatings, adhesives, emulsions, and clay slurries. This product has been packaged in 1/4-lb water-soluble bags for ease of use and is approved under 21 CFR § 176.230 and 176.300 of the U.S. Food and Drug Administration regulations. All emulsions, emulsion-based coatings and adhesives, and slurries are subject to bacterial deterioration in their shipping or storage containers. Busan® 1059WS-4 has been specifically designed to provide protection against this type of bacterial attack. voir moins | |
| Busan® 1078 | Buckman Laboratories, Inc. | Busan® 1078 is a combination of two isothiazalone derivatives that can provide broad-spectrum micro-organism control in water-based coatings, adhesives, and architectural materials. It is a non foaming, water-based product that is readily bio degradable. ...voir plus Busan® 1078 is a combination of two isothiazalone derivatives that can provide broad-spectrum micro-organism control in water-based coatings, adhesives, and architectural materials. It is a non foaming, water-based product that is readily bio degradable. Busan® 1078 is particularly recommended for control of bacteria and wet-stage fungi in water-based coatings, latices, adhesives, spackling, grouting, caulks, joint cements, and mastices. This biocide is also useful in controlling bacteria and wet-stage fungi in the manufacture and storage of dispersed pigments, such as clay, titanium dioxide, calcium carbonate, etc. voir moins | |
| Busan® 11-M1 | Buckman Laboratories, Inc. | Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1...voir plus Busan® 11-M1 is a multifunctional pigment for protection against corrosion, tannin staining, and UV light. This product is also an effective fire retardant and is used extensively to enhance the long-term performance and durability of paints. Busan® 11-M1 is the commercial form of modified barium metaborate monohydrate. It is 90+% active calculated as BaB2O4 H2O. voir moins | |
| Busan® 11-M2 | Buckman Laboratories, Inc. | Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated i...voir plus Busan® 11-M2 is a multifunctional pigment for use in coatings as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer. Because it is multifunctional, Busan® 11-M2 can replace several products commonly formulated into coating systems, simplifying formulating and lowering costs. Busan® 11-M2 is based on barium metaborate monohydrate. Due to the low refractive index (1.55–1.60), it can be used in a wide variety of colors, whites, and even clears. Busan® 11-M2 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. voir moins | |
| Busan® 1105 | Buckman Laboratories, Inc. | Busan® 1105 is a broad-spectrum, liquid fungicide for use in solvent-based stains, clear finishes, and wood preservatives. It has been formulated for improved solvency in solvent-based systems. This product is allowed for use under 21 CFR § 176.300 of the...voir plus Busan® 1105 is a broad-spectrum, liquid fungicide for use in solvent-based stains, clear finishes, and wood preservatives. It has been formulated for improved solvency in solvent-based systems. This product is allowed for use under 21 CFR § 176.300 of the U.S. Food and Drug Administration regulations. In stains and clear finishes, Busan® 1105 helps protect the coating film against disfigurement and deterioration from fungal attack. If these systems are registered as wood preservatives, the Busan® 1105 is also effective at inhibiting decay caused by wood-destroying fungi. voir moins | |
| Busan® 1118 | Buckman Laboratories, Inc. | Busan® 1118 is a broad-spectrum, liquid fungicide for use in water and solvent-based coatings, caulks, sealants, and wallcovering adhesives. The product has been specially formulated for improved emulsification in water. Busan® 1118 is composed of substan...voir plus Busan® 1118 is a broad-spectrum, liquid fungicide for use in water and solvent-based coatings, caulks, sealants, and wallcovering adhesives. The product has been specially formulated for improved emulsification in water. Busan® 1118 is composed of substances that have been allowed for use under 21 CFR § 176.300 of the U.S. Food and Drug Administration regulations. This product is used to protect the coating film against disfigurement and deterioration from fungal attack. For solvent- and water-based coatings, Busan® 1118 may be used at levels between 0.5% and 5.0%, based on total weight of the formula. Use levels will depend upon the resin system and the level of protection required. voir moins | |
| Busan® 1124 | Buckman Laboratories, Inc. | Busan® 1124 is a neutral pH, low odor, water-based formulation of the popular preservative "thione." It is effective in both acidic and alkaline systems, and does not possess the strong, pungent odor associated with caustic formulations of "thione." Busan...voir plus Busan® 1124 is a neutral pH, low odor, water-based formulation of the popular preservative "thione." It is effective in both acidic and alkaline systems, and does not possess the strong, pungent odor associated with caustic formulations of "thione." Busan® 1124 can be used for the preservation of clay slurries, adhesives, coatings, and high viscosity suspensions. This product is very effective in controlling growth of microorganisms that degrade additives and cause odors, spoilage, or loss of physical properties. voir moins | |
| Busan® 1130 | Buckman Laboratories, Inc. | Busan® 1130 is a nonmetal, nonformaldehyde contributing bactericide for use in water-based paints, adhesives, waxes, and polishes. The product is allowed for use under 21 CFR § 176.170 and 176.300 of the U.S. Food and Drug Administration regulations. Emul...voir plus Busan® 1130 is a nonmetal, nonformaldehyde contributing bactericide for use in water-based paints, adhesives, waxes, and polishes. The product is allowed for use under 21 CFR § 176.170 and 176.300 of the U.S. Food and Drug Administration regulations. Emulsion-based paints and adhesives are subject to bacterial deterioration in the container. Busan® 1130 has been specifically designed to provide protection against this type of bacterial attack. The product may be used at levels between 0.3%–1.5%, based on total weight of the emulsion. Testing is recommended to determine the level required to adequately protect the system. Introduce Busan® 1130 in the start-up water to ensure adequate dispersion. voir moins | |
| Busan® 1144 | Buckman Laboratories, Inc. | Busan® 1144 is a water-based formulation of 2-Bromo-2-nitropropane-1,3-diol. The product may be used for the control of bacterial and fungal growth in coatings, adhesives, and slurries. Busan® 1144 is particularly recommended for the preservation of starc...voir plus Busan® 1144 is a water-based formulation of 2-Bromo-2-nitropropane-1,3-diol. The product may be used for the control of bacterial and fungal growth in coatings, adhesives, and slurries. Busan® 1144 is particularly recommended for the preservation of starch, pigment and mineral slurries, adhesives, coatings, and other emulsion systems. This product is water soluble, effective in both acidic and alkaline systems, and relatively odorless. voir moins | |
| Busan® 1192 | Buckman Laboratories, Inc. | Busan® 1192 is a highly effective film preservative for use in water and solvent-based coatings. The extremely low water solubility ensures that Busan® 1192 stays in the paint film to provide long-term protection against disfigurement by fungi. Being a po...voir plus Busan® 1192 is a highly effective film preservative for use in water and solvent-based coatings. The extremely low water solubility ensures that Busan® 1192 stays in the paint film to provide long-term protection against disfigurement by fungi. Being a powder, Busan® 1192 should be added during the grind phase of the manufacturing process to ensure even distribution throughout the coating. This product may be used at levels between 0.25%–1.2%, based on total weight of the coating. Busan® 1192 is compatible with a wide range of coatings raw materials. However, it is recommended that the formulator conduct tests to ensure long-term compatibility and color stability in the particular formulation being used. voir moins | |
| Busan® 1192D | Buckman Laboratories, Inc. | Busan® 1192D is a highly effective film preservative dispersion for use in water-based coatings. An extremely low-water solubility helps ensure that Busan® 1192D stays in the paint film to provide long-term protection against disfigurement caused by fungi...voir plus Busan® 1192D is a highly effective film preservative dispersion for use in water-based coatings. An extremely low-water solubility helps ensure that Busan® 1192D stays in the paint film to provide long-term protection against disfigurement caused by fungi. This product is a 40% active aqueous dispersion of Busan® 1192. As a liquid, Busan® 1192D can be added during the grind or letdown phase of the manufacturing process. However, care should be taken to provide adequate agitation to ensure the product is evenly distributed throughout the coating. voir moins | |
| Busan® 1264 | Buckman Laboratories, Inc. | Busan® 1264 is a 19.8% aqueous solution of 1,2 benzoisothiazol-3(2H)-one. It effectively controls bacteria in water based products such as latex coatings, emulsions, latices, water-based slurries, photographic emulsions, metalworking and oil drilling flui...voir plus Busan® 1264 is a 19.8% aqueous solution of 1,2 benzoisothiazol-3(2H)-one. It effectively controls bacteria in water based products such as latex coatings, emulsions, latices, water-based slurries, photographic emulsions, metalworking and oil drilling fluids. Busan® 1264 is an effective preservative in most aqueous formulations. The product displays excellent compatibility and effectiveness over a wide pH range. Typical use levels range from 0.05%–0.25% based on the total weight of the composition or formulation. voir moins | |
| Busan® 1420 | Buckman Laboratories, Inc. | Busan® 1420 is a 20% active 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1420, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonm...voir plus Busan® 1420 is a 20% active 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1420, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonmedical, non food use natural and synthetic adhesive formulations and caulks to prevent the growth of fungal organisms in the material, both in the wet state and in the dry film of the finished product. It may be used in aqueous-based ink solutions for protection of these solutions against attack by fungal organisms. Busan® 1420 may also be used as a mildewcide in both aqueous- and solvent-based process formulations that coat cordage. voir moins | |
| Busan® 1440 | Buckman Laboratories, Inc. | Busan® 1440 is a 40% active, 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1440, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to non...voir plus Busan® 1440 is a 40% active, 3-iodo-2-propynyl-butyl carbamate (IPBC) with broad-spectrum fungicidal activity. Busan® 1440, used in solvent and waterborne paints and stains, will inhibit the growth of mildew. This product can be used as an additive to nonmedical, non food use natural and synthetic adhesive formulations and caulks to prevent the growth of fungal organisms in the material, both in the wet state and in the dry film of the finished product. Busan® 1440 may be used in aqueous-based ink solutions for protection of these solutions against attack by fungal organisms. Finally, this product may be used to prevent surface mildew growth on plastic items, such as shower curtains, cable and wire insulation, and sun umbrellas. voir moins | |
| Busan® 1498 | Buckman Laboratories, Inc. | Busan® 1498 is a nonmetallic, 98%-active, 3-iodo-2-propynyl butyl carbamate (IPBC) off-white solid. It is a broad-spectrum fungicide for use in aqueous and solvent-based applications. Busan® 1498 inhibits the growth of mildew in solventbased paints and wa...voir plus Busan® 1498 is a nonmetallic, 98%-active, 3-iodo-2-propynyl butyl carbamate (IPBC) off-white solid. It is a broad-spectrum fungicide for use in aqueous and solvent-based applications. Busan® 1498 inhibits the growth of mildew in solventbased paints and waterborne paints, stains, and latex emulsions. It can be used as an additive to nonmedical, nonfood use natural and synthetic adhesives, caulks, patching compounds, sealants, grouts, and latexes, such as SBR/latex flooring adhesives, and carpet back ings to prevent the growth of fungi, molds, and mildews in the material, both in the wet state and in the dry film of the finished product. Busan® 1498 may also be used to prevent surface mildew growth on plastic items, such as shower curtains, cable and wire insulation, sun umbrellas, polymer furniture, filter medias, polymer components of carpet, etc. Intended plastics include polymers, such as PVC, polyurethanes, elastomers and rubbers, neoprene, styrene compounds, polyolefins, etc. voir moins | |
| Busan® 30WB | Buckman Laboratories, Inc. | Busan® 30WB is a microbicide concentrate that is used as a preservative for caulking-sealants and vinyl acetate wallcovering adhesives. Its addition to these products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, un...voir plus Busan® 30WB is a microbicide concentrate that is used as a preservative for caulking-sealants and vinyl acetate wallcovering adhesives. Its addition to these products will inhibit the growth of fungi (mold, “mildew”) that often cause the discoloration, unsightly appearance, and degradation of these compounds, particularly when they are exposed to humid environments. Busan® 30WB is especially recommended for the pro tec tion of caulking-sealants intended for use around bath tubs, showers, and bathroom tiles, and vinyl acetate adhesives used on fabrics and paper for covering walls. voir moins | |
| Busperse® 203 | Buckman Laboratories, Inc. | Busperse® 203 is an anionic dispersing agent composed of water-soluble polyelectrolytes and containing no phosphates or nitrilotriacetic acid (NTA). The product is used as a pigment dispersant in emulsion paints and pigment slurries. Busperse® 203 is comp...voir plus Busperse® 203 is an anionic dispersing agent composed of water-soluble polyelectrolytes and containing no phosphates or nitrilotriacetic acid (NTA). The product is used as a pigment dispersant in emulsion paints and pigment slurries. Busperse® 203 is composed of substances that have been allowed for use by the U.S. Food and Drug Administration regulations, CFR § 175.300 Resinous and polymeric coatings, and 175.105 Adhesives. Busperse® 203 can be dispensed directly from the shipping container. It is not necessary to dissolve or dilute the product prior to use. The product has a low foaming tendency and is effective over a wide pH range. voir moins | |
| Busperse® 2144 | Buckman Laboratories, Inc. | Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pa...voir plus Busperse® 2144 is a proprietary, acrylate-based dispersant for use in water-based coatings, slurries, adhesives, and similarly formulated products. It has been found to be a noncorrosive, extremely effective anionic dispersant. This product is a clear, pale-yellow liquid with an ammoniacal odor. voir moins | |
| Busperse® 2180 | Buckman Laboratories, Inc. | Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The...voir plus Busperse® 2180 is a new, patented dispersant for use in coatings, stains, and clear finishes. It is a 60%-active emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 7.25. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2180 disperses in aqueous systems with good agitation. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. voir moins | |
| Busperse® 2181 | Buckman Laboratories, Inc. | Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product i...voir plus Busperse® 2181 is a patented surfactant used in coatings, stains, and clear finishes. It is a 30%-active, emulsifiable concentrate that exhibits certain surfactant-like properties. The HLB (Hydrophile-Lipophile Balance) is estimated to be 8. The product is generally nonionic at neutral to alkaline pH and slightly cationic at acidic pH. Busperse® 2181 disperses well in aqueous systems. It is not soluble in petroleum distillates, such as mineral spirits, toluene, xylene, aromatic 150, or VM&P naptha. The product is soluble in solvent systems that contain oxygenated solvents, such as glycols, glycol ethers, ketones, and acetates. voir moins | |
| Busperse® 229 | Buckman Laboratories, Inc. | Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better we...voir plus Busperse® 229 is an organic dispersant designed to minimize the problems of blistering and adhesion loss and at the same time act as a pigment dispersant and wetting agent. The effectiveness of Busperse® 229 is attributed to its ability to allow better wetting of the substrate by the binder, reducing moisture permeability of the paint film. This product should be added with water prior to the addition of wetting agents and pigments. The pigment slurry should be dispersed at high speed, cooled and let down with the water-reducible alkyd binder. voir moins | |
| Busperse® 275 | Buckman Laboratories, Inc. | Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 17...voir plus Busperse® 275 is an effective general purpose, anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 173.310 of the U.S. Food and Drug Administration regulations. This product is a yellow-orange liquid, and it may be used in coatings at levels between 0.3% and 1.0%, based on total weight of the formulation. voir moins | |
| Busperse® 282 | Buckman Laboratories, Inc. | Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...voir plus Busperse® 282 is an effective, general purpose anionic dispersant for use in water-based systems such as emulsion and water-reducible coatings, pigment slurries, and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. voir moins | |
| Busperse® 284 | Buckman Laboratories, Inc. | Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176...voir plus Busperse® 284 is an effective, general purpose anionic dispersant for use in water-based systems, such as emulsion and water-reducible coatings, pigment slurries and adhesives. It is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Busperse® 284 may be used in coatings at levels between 0.3% and 1.1%, based on total weight of the formulation. voir moins | |
| Busperse® 2848 | Buckman Laboratories, Inc. | Busperse® 2848 is a greener alternative to other dispersants since it is zero VOC, has FDA approval, and low odor. It is a unique lend of proprietary products that enables excellent dispersion properties, substrate wetting, and aids in anti-corrosive prop...voir plus Busperse® 2848 is a greener alternative to other dispersants since it is zero VOC, has FDA approval, and low odor. It is a unique lend of proprietary products that enables excellent dispersion properties, substrate wetting, and aids in anti-corrosive properties when used with reactive pigments. This product is recommended for pigment dispersing and improved blister resistance. voir moins | |
| Busperse® 39 | Buckman Laboratories, Inc. | Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Buspe...voir plus Busperse® 39 is a high solids, anionic dispersant used in water-based paints and pigment slurries. It is effective at very low concentrations and does not require the use of additional dispersants or wetting agents during the pigment-grinding stage. Busperse® 39 also provides excellent viscosity stability when using reactive pigments. It exhibits good color acceptance, is low foaming, and is not corrosive. Busperse® 39 has good compatibility with glycols and is therefore well-suited for use in gloss latex paint formulations. This product is a translucent, pale yellow liquid. voir moins | |
| Busperse® 47 | Buckman Laboratories, Inc. | Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic r...voir plus Busperse® 47 is a 100% solids, zero VOC, nonionic dispersing aid, wetting aid and viscosity depressant that is compatible with a wide range of vehicles. Busperse® 47 has shown the ability to aid in dispersing difficult-to-grind pigments, such as organic reds, yellows, and oranges as well as various black pigments. The nonionic nature of Busperse® 47 makes it compatible in a wide range of coatings vehicles allowing for ease of formulation. This product can be dispersed directly into a variety of solvent-based polymers, such as conventional- and high-solids alkyds, polyesters, two-component epoxies, and urethanes. Busperse® 47 is soluble in many organic solvents, both polar and non polar. It should be added directly to the grind prior to the addition of the most difficult to grind pigment. voir moins | |
| Butrol® 22 | Buckman Laboratories, Inc. | Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, ...voir plus Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, such as conventional alkyds, urethanes, and epoxies. Because Butrol® 22 can be used across this full range of systems, it can replace several anticorrosive pigments, simplifying formulating and lowering inventory costs. This product is based on barium metaborate monohydrate and has been optimized for corrosion applications. voir moins | |
| Butrol® 334 | Buckman Laboratories, Inc. | Butrol® 334 is a corrosion inhibitor for flash rust control. It is compatible with a wide range of waterbased coatings, including acrylics, vinyl acrylics, and water-reducible alkyds. When used for in-can corrosion resistance in water-based coatings, Butr...voir plus Butrol® 334 is a corrosion inhibitor for flash rust control. It is compatible with a wide range of waterbased coatings, including acrylics, vinyl acrylics, and water-reducible alkyds. When used for in-can corrosion resistance in water-based coatings, Butrol® 334 is incorporated at levels of 0.2%–0.5%, based on the total weight of the coating. It will not migrate from the liquid coating into the head space of the containers. Thus, once the container is filled with the paint, it should be inverted to ensure that the paint comes into contact with all metal surfaces. When used in water-based coatings to control flash and early rusting, Butrol® 334 is effective at levels of 0.1%–1.0%, based on total formulation weight. voir moins | |
| Butrol® 9102 | Buckman Laboratories, Inc. | Butrol® 9102 is a nonlead, nonchrome, nonbarium corrosion-inhibitive pigment for use in coatings, caulks, sealants, and adhesives. It is an off-white, slightly soluble pigment. This clay-like powder may be used at levels between 1.5%–12%, based on total f...voir plus Butrol® 9102 is a nonlead, nonchrome, nonbarium corrosion-inhibitive pigment for use in coatings, caulks, sealants, and adhesives. It is an off-white, slightly soluble pigment. This clay-like powder may be used at levels between 1.5%–12%, based on total formula weight, to improve corrosion inhibition. Butrol® 9102 should be added to the grind portion of the formulation. voir moins | |
| Butrol® 9119 | Buckman Laboratories, Inc. | Butrol® 9119 is a calcium-based corrosion inhibitor for coatings. It is white in color and low in refractive index making it appropriate in clear and colored systems. This reactive pigment has shown excellent efficacy in both water- and solvent-thinned co...voir plus Butrol® 9119 is a calcium-based corrosion inhibitor for coatings. It is white in color and low in refractive index making it appropriate in clear and colored systems. This reactive pigment has shown excellent efficacy in both water- and solvent-thinned coatings. Butrol® 9119 has a low oil absorption and contains no barium, chromium, or lead. It also has a very small mean particle size. This makes Butrol® 9119 appropriate for applications where many corrosion inhibitors would be unusable. voir moins | |
| Butrol® 9140 | Buckman Laboratories, Inc. | Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables...voir plus Butrol® 9140 is a finely ground, multifunctional pigment based on barium metaborate monohydrate for use as a corrosion inhibitor, tannin stain blocker, flame retardant, and ultraviolet light stabilizer in coatings. The product’s multifunctionality enables it to replace several products commonly formulated into coatings systems, thereby simplifying formulating. Because this pigment is ground to 1.5 microns, there is an increased surface area which can give equal or greater performance at lower use levels than other protective pigments. Butrol® 9140 is composed of substances approved for use under 21 CFR § 176.180 of the U.S. Food and Drug Administration regulations. voir moins | |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...voir plus Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. voir moins | |
| Defoamer EDW-707 | HS CHEM CO.,LTD | Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...voir plus Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. voir moins | |
| Defoamer EDW-709 | HS CHEM CO.,LTD | Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...voir plus Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. voir moins | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...voir plus Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. voir moins | |
| Monoflat 10P-A | HS CHEM CO.,LTD | Monoflat 10P-A is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is o...voir plus Monoflat 10P-A is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is often used in U.V paint, plastic paint, lacquer paint, polyurethane paint, and gravure ink. voir moins | |
| Monoflat 10P-S | HS CHEM CO.,LTD | Monoflat 10P-S is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is o...voir plus Monoflat 10P-S is a dispersion of polyethylene wax in toluene to impart a smooth matted effect to the surface finish. This product also provides excellent mar proofing effect, anti-blocking, and slip enhancing properties for all types of coatings. It is often used in U.V paint, plastic paint, lacquer paint, polyurethane paint, and gravure ink. voir moins | |
| MONORAL® 2000NT | HS CHEM CO.,LTD | MONORAL® 2000NT is a flowing gel of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in zinc-rich primers, solvent based enamels, PCM coatings, a...voir plus MONORAL® 2000NT is a flowing gel of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in zinc-rich primers, solvent based enamels, PCM coatings, and industrial coatings. voir moins | |
| MONORAL® 2000X | HS CHEM CO.,LTD | MONORAL® 2000X is a flowing gel of polyolefin wax dispersed in xylene uniquely designed to provide anti-settling and anti-hard caking with stability of pigment suspension for non-aqueous coatings. This product is often used in zinc-rich primers, PCM coati...voir plus MONORAL® 2000X is a flowing gel of polyolefin wax dispersed in xylene uniquely designed to provide anti-settling and anti-hard caking with stability of pigment suspension for non-aqueous coatings. This product is often used in zinc-rich primers, PCM coatings, and industrial coatings. voir moins | |
| MONORAL® 3000NT | HS CHEM CO.,LTD | MONORAL® 3000NT is a flowing gel of polyolefin wax systematically dispersed in low toxic aromatic solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is often used in zinc-rich primers, solvent based ena...voir plus MONORAL® 3000NT is a flowing gel of polyolefin wax systematically dispersed in low toxic aromatic solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is often used in zinc-rich primers, solvent based enamels, PCM coatings, and industrial coatings. voir moins | |
| MONORAL® 3000X | HS CHEM CO.,LTD | MONORAL® 3000X is a light yellow, flowing gel of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension for non-aqueous coatings. This product is often used in zinc-rich primers, PCM coatings,...voir plus MONORAL® 3000X is a light yellow, flowing gel of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension for non-aqueous coatings. This product is often used in zinc-rich primers, PCM coatings, and industrial coatings. voir moins | |
| MONORAL® 3300 | HS CHEM CO.,LTD | MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often use...voir plus MONORAL® 3300 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 3300H | HS CHEM CO.,LTD | MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used i...voir plus MONORAL® 3300H is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable with most solvent based synthetic resin coatings. It is used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 3300K | HS CHEM CO.,LTD | MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...voir plus MONORAL® 3300K is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 3300M | HS CHEM CO.,LTD | MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...voir plus MONORAL® 3300M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 3300S | HS CHEM CO.,LTD | MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often us...voir plus MONORAL® 3300S is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. It is often used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 4000NT | HS CHEM CO.,LTD | MONORAL® 4000NT is a soft light yellow paste of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling properties for industrial solvent based coatings. This product is used in industrial coatings, heavy duty coatings, oil-based p...voir plus MONORAL® 4000NT is a soft light yellow paste of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling properties for industrial solvent based coatings. This product is used in industrial coatings, heavy duty coatings, oil-based paints, wash primer, and traffic paints. voir moins | |
| MONORAL® 4000X | HS CHEM CO.,LTD | MONORAL® 4000X is a concentrated soft light yellow paste of polyolefin wax dispersed in xylene to impart control pigment settling for industrial solvent based coatings. This product is often used in industrial coatings, heavy duty coatings, oil-based pain...voir plus MONORAL® 4000X is a concentrated soft light yellow paste of polyolefin wax dispersed in xylene to impart control pigment settling for industrial solvent based coatings. This product is often used in industrial coatings, heavy duty coatings, oil-based paint, wash primer, and traffic paints. voir moins | |
| MONORAL® 410 | HS CHEM CO.,LTD | MONORAL® 410 is a flowing gel of multi-purpose rheological additive dispersed in xylene to provide anti-settling properties for metallic coating systems. This product is often used in non-aqueous coatings, metallic paints, and industrial coatings. | |
| MONORAL® 412NT | HS CHEM CO.,LTD | MONORAL® 412NT is a flowing gel of multi-purpose rheological additive dispersed in low toxic aromatic solvent to provide anti-settling properties for metallic coating systems. This product is often used in metallic enamels, flat enamels, non-aqueous coati...voir plus MONORAL® 412NT is a flowing gel of multi-purpose rheological additive dispersed in low toxic aromatic solvent to provide anti-settling properties for metallic coating systems. This product is often used in metallic enamels, flat enamels, non-aqueous coatings, metallic paints, and industrial coatings. voir moins | |
| MONORAL® 413BA | HS CHEM CO.,LTD | MONORAL® 413BA is a flowing gel of multi-purpose rheological additive dispersed in N-Butyl acetate solvent to provide anti-settling properties for metallic coating systems. This product is often used in metallic enamels, flat enamels, non-aqueous coatings...voir plus MONORAL® 413BA is a flowing gel of multi-purpose rheological additive dispersed in N-Butyl acetate solvent to provide anti-settling properties for metallic coating systems. This product is often used in metallic enamels, flat enamels, non-aqueous coatings, metallic paints, and industrial coatings. voir moins | |
| MONORAL® 420-20 | HS CHEM CO.,LTD | MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic pa...voir plus MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, and industrial coating systems. voir moins | |
| MONORAL® 420-20BA | HS CHEM CO.,LTD | MONORAL® 420-20BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primer...voir plus MONORAL® 420-20BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primers, and traffic paints as well as industrial coatings. voir moins | |
| MONORAL® 420-40BA | HS CHEM CO.,LTD | MONORAL® 420-40BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primer...voir plus MONORAL® 420-40BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primers, and traffic paints as well as industrial coatings. voir moins | |
| MONORAL® 510 | HS CHEM CO.,LTD | MONORAL® 510 is a flowing gel of multi-purpose rheological additive dispersed in xylene to provide anti-settling properties for metallic coating systems. This product is used in non-aqueous coatings, metallic paints, and industrial coatings. | |
| MONORAL® 5405 | HS CHEM CO.,LTD | MONORAL® 5405 is a rheological hybrid gel of polyamide and polyethylene wax designed to provide anti-settling properties for non-aqueous coating systems. This product is used in metallic enamels, flat enamels, metallic paints, and industrial coatings. | |
| MONORAL® 5410 | HS CHEM CO.,LTD | MONORAL® 5410 is a rheological hybrid gel of polyamide and polyethylene wax to provide anti-settling properties for non-aqueous coating systems. This product is used in metallic enamels, flat enamels, metallic paints, and industrial coatings. | |
| MONORAL® 5500 | HS CHEM CO.,LTD | MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is...voir plus MONORAL® 5500 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product is characterized by its ability to develop a thixotropic structure and is applicable to most solvent based synthetic resin coatings. This product is used in heavy duty coatings, industrial coatings, and architectural coatings. voir moins | |
| MONORAL® 5510 | HS CHEM CO.,LTD | MONORAL® 5510 is a rheological hybrid gel of polyamide and polyethylene wax to provide anti-settling properties for non-aqueous coating systems. This product is used in metallic enamels, flat enamels, metallic paints, and industrial coatings. | |
| MONORAL® 60BA | HS CHEM CO.,LTD | MONORAL® 60BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primers, a...voir plus MONORAL® 60BA is a hard white paste of polyolefin wax dispersed in HAPs free solvent to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primers, and traffic paints as well as industrial coatings. voir moins | |
| MONORAL® 60MS | HS CHEM CO.,LTD | MONORAL® 60MS is a hard light yellow paste of polyolefin wax dispersed in mineral spirits to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash prime...voir plus MONORAL® 60MS is a hard light yellow paste of polyolefin wax dispersed in mineral spirits to provide anti-settling and anti-hard caking properties for non-aqueous coatings. This product is used in solvent based enamels such as oil based paints, wash primers, and traffic paints as well as industrial coatings. voir moins | |
| MONORAL® 60X | HS CHEM CO.,LTD | MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint...voir plus MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, enamels, and industrial coating systems. voir moins | |
| MONORAL® 619 | HS CHEM CO.,LTD | MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ...voir plus MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ink and urethane paint applications. voir moins | |
| MONORAL® 725 | HS CHEM CO.,LTD | MONORAL® 725 is a dispersion of low molecular weight polyethylene in toluene designed to impart abrasion and mar resistance and slip enhancing properties to the surface finish. This product is often used in gravure ink applications. | |
| MONORAL® 8500 | HS CHEM CO.,LTD | MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, t...voir plus MONORAL® 8500 is an organically modified derivative of castor oil that comes in the form of a white powder. This product is used in adhesives, inks, decorative coatings, varnishes, epoxies, aliphatic and aromatic solvent borne coatings, powder coatings, traffic paint, and solvent free coatings. voir moins | |
| MONORAL® 8700 | HS CHEM CO.,LTD | MONORAL® 8700 is a micronized amide wax powder. This product is often used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8800 | HS CHEM CO.,LTD | MONORAL® 8800 is a micronized amide wax powder. This product is used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
| MONORAL® 8900 | HS CHEM CO.,LTD | MONORAL® 8900 is a micronized amide wax powder. This product is used in heavy duty protective coatings and solvent based anti-corrosion coatings. | |
| MONORAL® A630-20M | HS CHEM CO.,LTD | MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic...voir plus MONORAL® A630-20M is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product can impart excellent anti-sagging and anti-settling properties and is applicable to most solvent based synthetic resin coatings in the aliphatic system. It is also used in heavy duty, general industrial, decorative, and wood finishes. voir moins | |
| MONORAL® A670-20M | HS CHEM CO.,LTD | MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...voir plus MONORAL® A670-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in oil modified urethane coatings, heavy duty, general industrial, decorative, and wood finishes. voir moins | |
| MONORAL® A680-20M | HS CHEM CO.,LTD | MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coati...voir plus MONORAL® A680-20M is a synthetic polyamide wax dispersed in a mixture of mineral spirits and low odor alcohol. This product imparts excellent anti-sagging and anti-settling properties and is applicable to most aliphatic solvent based synthetic resin coatings. It is also used in heavy duty, general industrial, decorative, and wood finishes. voir moins | |
| MONORAL® A690-20M | HS CHEM CO.,LTD | MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor ...voir plus MONORAL® A690-20M is a synthetic polyamide wax that is applicable to most solvent based synthetic resin coatings in the aliphatic system. This product is often used in general industrial, decorative, wood finishes and architectural coatings with low odor requirements. voir moins | |
| MONORAL® AF3200 | HS CHEM CO.,LTD | MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic sy...voir plus MONORAL® AF3200 is a synthetic polyamide wax that comes in the form of a yellowish white paste. This product imparts excellent anti-sagging and anti-settling properties and is used in architectural and industrial coatings as well as resins in aliphatic systems. voir moins |
