| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...もっと表示する Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. 表示を減らす | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...もっと表示する Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. 表示を減らす | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...もっと表示する Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. 表示を減らす | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...もっと表示する Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. 表示を減らす | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...もっと表示する Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. 表示を減らす | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...もっと表示する Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. 表示を減らす | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...もっと表示する Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. 表示を減らす | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...もっと表示する Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. 表示を減らす | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...もっと表示する Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. 表示を減らす | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...もっと表示する Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. 表示を減らす | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and h...もっと表示する Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. 表示を減らす | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...もっと表示する Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. 表示を減らす | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior c...もっと表示する Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. 表示を減らす | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products,...もっと表示する Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. 表示を減らす | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on. | |
| Celopro® ME10M P | Celotech Chemical Co., Ltd. | Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...もっと表示する Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 表示を減らす | |
| Celopro® ME20M P | Celotech Chemical Co., Ltd. | Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...もっと表示する Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 表示を減らす | |
| Celopro® ME30M P | Celotech Chemical Co., Ltd. | Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...もっと表示する Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 表示を減らす | |
| Celopro® ME40M P | Celotech Chemical Co., Ltd. | Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...もっと表示する Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 表示を減らす | |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| Celopro® ME50M P | Celotech Chemical Co., Ltd. | Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-base...もっと表示する Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, gypsum-based machine applied plasters, and decorative renders. 表示を減らす | |
| Celopro® ME60M P | Celotech Chemical Co., Ltd. | Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, ...もっと表示する Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, and machine applied plasters. 表示を減らす | |
| Celopro® ME6M P | Celotech Chemical Co., Ltd. | Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based j...もっと表示する Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based jointing compounds. 表示を減らす | |
| Celopro® ME70M P | Celotech Chemical Co., Ltd. | Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and th...もっと表示する Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and thin layer plasters. 表示を減らす | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offere...もっと表示する Celopro® MH15M P is a medium viscosity type of Hydroxyethyl methylcellulose (HEMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the Celopro® MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. 表示を減らす | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered...もっと表示する Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. 表示を減らす | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retent...もっと表示する Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product has been applied in tile adhesives, skim coats, thin layer plasters, gypsum based trowelling compounds, machine applied plasters, and decorative renders. 表示を減らす | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ap...もっと表示する Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in gypsum and cement based plasters, joint fillers, machine-applied plasters, tile adhesives, gypsum-lime-plasters, thin layer plasters, and gypsum based plasters. 表示を減らす | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® ...もっと表示する Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. 表示を減らす | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modi...もっと表示する Celopro® MK30M FP is a non-modified high viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, plasters, skim coats, trowelling compounds etc. 表示を減らす | |
| Celopro® MK400 P | Celotech Chemical Co., Ltd. | Celopro® MK400 P is a low viscosity type of Hydroxypropyl methylcellulose (HPMC). It is specially developed for application as a self-leveling compound. | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-mod...もっと表示する Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, cement-lime-plasters, skim coats, plasters, machine applied plasters, joint fillers and thermal insulation systems. 表示を減らす | |
| Celopro® MK4M FP | Celotech Chemical Co., Ltd. | Celopro® MK4M FP is a non modified lower viscosity Hydroxypropyl methylcellulose (HPMC) that provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. | |
| Celopro® MK6M FP | Celotech Chemical Co., Ltd. | Celopro® MK6M FP is a non modified lower viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ...もっと表示する Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in plaster, joint filler, tile adhesive, gypsum-lime-plasters, thin layer plasters etc. 表示を減らす | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide wate...もっと表示する Celopro® MK70MS FP is an extremely high viscosity type of Hydroxypropyl methyl cellulose (HPMC) with surface-treatment. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product can be applied in plasters, joint fillers, tile adhesives, gypsum-lime-plasters, and thin layer plasters. 表示を減らす | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...もっと表示する EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 表示を減らす | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...もっと表示する EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...もっと表示する EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 表示を減らす | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...もっと表示する EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 表示を減らす | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...もっと表示する EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 表示を減らす | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...もっと表示する EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...もっと表示する EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...もっと表示する EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 表示を減らす | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...もっと表示する EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...もっと表示する EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. 表示を減らす | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....もっと表示する EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...もっと表示する EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...もっと表示する EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...もっと表示する EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. 表示を減らす | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...もっと表示する EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. 表示を減らす | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...もっと表示する EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. 表示を減らす | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...もっと表示する EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...もっと表示する EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. 表示を減らす | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...もっと表示する EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. 表示を減らす | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...もっと表示する EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...もっと表示する EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...もっと表示する ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...もっと表示する ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. 表示を減らす | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...もっと表示する ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. 表示を減らす | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...もっと表示する ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. 表示を減らす | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...もっと表示する ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. 表示を減らす | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...もっと表示する ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...もっと表示する ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. 表示を減らす | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...もっと表示する ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. 表示を減らす | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...もっと表示する ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. 表示を減らす | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...もっと表示する ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. 表示を減らす | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...もっと表示する ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. 表示を減らす | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...もっと表示する ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. 表示を減らす | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...もっと表示する ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. 表示を減らす | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...もっと表示する ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. 表示を減らす | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...もっと表示する ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. 表示を減らす | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...もっと表示する ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. 表示を減らす |
