| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...もっと表示する EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 表示を減らす | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...もっと表示する EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...もっと表示する EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 表示を減らす | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...もっと表示する EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 表示を減らす | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...もっと表示する EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 表示を減らす | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...もっと表示する EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...もっと表示する EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...もっと表示する EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 表示を減らす | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...もっと表示する EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...もっと表示する EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. 表示を減らす | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....もっと表示する EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 表示を減らす | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...もっと表示する EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...もっと表示する EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...もっと表示する EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. 表示を減らす | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...もっと表示する EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. 表示を減らす | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...もっと表示する EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. 表示を減らす | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...もっと表示する EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 表示を減らす | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...もっと表示する EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. 表示を減らす | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...もっと表示する EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. 表示を減らす | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...もっと表示する EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...もっと表示する EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. 表示を減らす | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...もっと表示する ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...もっと表示する ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. 表示を減らす | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...もっと表示する ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. 表示を減らす | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...もっと表示する ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. 表示を減らす | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...もっと表示する ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. 表示を減らす | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...もっと表示する ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...もっと表示する ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. 表示を減らす | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...もっと表示する ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. 表示を減らす | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...もっと表示する ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 表示を減らす | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...もっと表示する ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. 表示を減らす | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...もっと表示する ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. 表示を減らす | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...もっと表示する ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. 表示を減らす | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...もっと表示する ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. 表示を減らす | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...もっと表示する ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. 表示を減らす | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...もっと表示する ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. 表示を減らす | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...もっと表示する ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. 表示を減らす | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...もっと表示する ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. 表示を減らす | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...もっと表示する Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. 表示を減らす | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...もっと表示する Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). 表示を減らす | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...もっと表示する Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. 表示を減らす | |
| Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...もっと表示する Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. 表示を減らす | |
| Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...もっと表示する Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...もっと表示する Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...もっと表示する Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...もっと表示する Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...もっと表示する Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...もっと表示する Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...もっと表示する Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...もっと表示する Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...もっと表示する Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...もっと表示する Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...もっと表示する Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...もっと表示する Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. 表示を減らす | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...もっと表示する Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...もっと表示する Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...もっと表示する Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...もっと表示する Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...もっと表示する Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...もっと表示する Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. 表示を減らす | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...もっと表示する Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. 表示を減らす | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...もっと表示する Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. 表示を減らす | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...もっと表示する Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. 表示を減らす | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. |
