| A-6 Polyamine | Epoxy Chemicals, Inc. | A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adh...もっと表示する A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adhesion properties. It finds application in construction adhesives, hardened concrete adhesives, injection resin, and ASTM 881 resin systems. 表示を減らす | |
| APR Polyamine | Epoxy Chemicals, Inc. | APR Polyamine is a clear liquid that functions as a fast setting amine curing agent with very low viscosity. This product has high strength and can be used as an AEP replacement. It is often used as an accelerator for other curing agents and in adhesives. | |
| EFB Polyamine | Epoxy Chemicals, Inc. | EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds applic...もっと表示する EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds application in seamless epoxy flooring, coatings, and chemical resistant coatings. 表示を減らす | |
| FB Polyamine | Epoxy Chemicals, Inc. | FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use...もっと表示する FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with bisphenol A epoxy resins, and acrylated/epoxy resins at room temperature. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. 表示を減らす | |
| FB-25 Polyamine | Epoxy Chemicals, Inc. | FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with...もっと表示する FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. 表示を減らす | |
| FB-30 Polyamine | Epoxy Chemicals, Inc. | FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and ...もっと表示する FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in chemical resistant coatings and seamless flooring. 表示を減らす | |
| FB-31 Polyamine | Epoxy Chemicals, Inc. | FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use wi...もっと表示する FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. 表示を減らす | |
| FB-618 Polyamine | Epoxy Chemicals, Inc. | FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and...もっと表示する FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid epoxy resins. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. 表示を減らす | |
| FB-84 Polyamine | Epoxy Chemicals, Inc. | FB-84 Polyamine is a light colored aliphatic curing agent with low viscosity, virtually no odor, high gloss finish, and a long pot life. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with li...もっと表示する FB-84 Polyamine is a light colored aliphatic curing agent with low viscosity, virtually no odor, high gloss finish, and a long pot life. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid epoxy resins. It finds application in high solids coatings, flooring, and decoupage. 表示を減らす | |
| FS-10 Polyamine | Epoxy Chemicals, Inc. | FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative o...もっと表示する FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in epoxy construction adhesives and flooring applications such as construction adhesives, injection resins, seamless trowel flooring, and hardened concrete adhesives. 表示を減らす | |
| FS-1608 Polyamine | Epoxy Chemicals, Inc. | FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactiv...もっと表示する FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. 表示を減らす | |
| FS-289 Polyamine | Epoxy Chemicals, Inc. | FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used ...もっと表示する FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It is suitable for use in construction adhesives, injection resins, accelerated flooring systems, and hardened concrete adhesives. 表示を減らす | |
| FS-290 Polyamine | Epoxy Chemicals, Inc. | FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener...もっと表示する FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It functions as a curing agent for liquid epoxy resins, and finds application in construction adhesives, solvent free high solids coatings, crack injection resins, accelerate flooring systems, and hardened concrete adhesives. 表示を減らす | |
| FS-43 Polyamine | Epoxy Chemicals, Inc. | FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactiv...もっと表示する FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactive accelerator for polyamide, amidoamine, and cycloaliphatic amine curing agents. It is suitable for use in construction adhesives, injection resins, and hardened concrete adhesives. 表示を減らす | |
| FS-56 Polyamine | Epoxy Chemicals, Inc. | FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or ...もっと表示する FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in construction adhesives, injection resins, seamless flooring, and hardened concrete adhesives. 表示を減らす | |
| FS-943 Polyamine | Epoxy Chemicals, Inc. | FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive...もっと表示する FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. 表示を減らす | |
| HCR 280 Polyamine | Epoxy Chemicals, Inc. | HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and ...もっと表示する HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and can find application in industrial flooring, high-solids coatings, chemical resistant linings and mortars, and secondary containment linings. 表示を減らす | |
| HCR Polyamine | Epoxy Chemicals, Inc. | HCR Polyamine is a low viscosity cycloaliphatic polyamine blend designed for high chemical resistance. This product can be combined with liquid epoxy resins or epoxy novolac resin, it has low odor and long working life. | |
| LM Polyamine | Epoxy Chemicals, Inc. | LM Polyamine is an amine curing agent suited for use in epoxy construction adhesives for low modulus properties. This product is intended for use with liquid epoxy resins at room temperature, and has strong adhesion to concrete. It finds application in ep...もっと表示する LM Polyamine is an amine curing agent suited for use in epoxy construction adhesives for low modulus properties. This product is intended for use with liquid epoxy resins at room temperature, and has strong adhesion to concrete. It finds application in epoxy overlays for non-skid surfaces, ASTM 881, type III resin systems, and DOT epoxies. 表示を減らす | |
| Tytan AP20 (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding po...もっと表示する Tytan AP20 is primarily designed to strongly increase adhesion of solvent based inks/coatings to a variety of plastics used for food packaging or other purposes. It also improves pigment distribution and heat sealing resistance, allowing perfect hiding power and appearance of printing on otherwise problematic substrates. 表示を減らす | |
| Tytan AQ33 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ33 can be used as an adhesion promoter or cross linking agent. It is recommended for water-borne coatings in base environments on various surfaces. | |
| Tytan AQ5000 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the...もっと表示する Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-borne coatings in acid environments on various surfaces. 表示を減らす | |
| Tytan AQZ30 (Zirconate Crosslinker) | Borica Co., Ltd. | Tytan AQZ30 has the ability to work as adhesion promoter and crosslinking agent. This product is recommended for water-borne and solvent-borne inks. | |
| Tytan BIP15 (Titanate Mixture) | Borica Co., Ltd. | Tytan BIP15 is a mixture of tetra isopropyl titanate and tetra n-butyl titanate at 85-15 ratio. It works as adhesion promoter, crosslinking agent for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan CP-219 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-219 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CP-317 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical propert...もっと表示する Tytan CP-317 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in an organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the mechanical property. 表示を減らす | |
| Tytan CP-318 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining t...もっと表示する Tytan CP-318 is a solid material and can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, and carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. 表示を減らす | |
| Tytan CP-326 (Titanate Coupling Agent) | Borica Co., Ltd. | Tytan CP-326 can enhance the dispersion of inorganic fillers/pigment such as calcium carbonate, titanium dioxide, carbon black in organic system. It can increase filler/pigment loading to reduce overall cost while maintaining the property. | |
| Tytan CX100 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX100 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX200 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX200 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan CX400 (Titanate Rheology Modifier) | Borica Co., Ltd. | Tytan CX400 is developed as a rheology modifier for emulsion paints. It reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. | |
| Tytan EHT (Tetra 2-Ethylhexyl Titanate) | Borica Co., Ltd. | Tytan EHT is used in a variety of industrial applications as an adhesion promoter and as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan ET (Tetra Ethyl Titanate) | Borica Co., Ltd. | Tytan ET is used in a variety of industrial applications as an adhesion promoter, as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan PBT (Titanate Crosslinker) | Borica Co., Ltd. | Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resi...もっと表示する Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint containing Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dries, it can stand up to 600 oC. 表示を減らす | |
| Tytan S2 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...もっと表示する Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. 表示を減らす | |
| Tytan S22 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...もっと表示する Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. 表示を減らす | |
| Tytan S6 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...もっと表示する Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. 表示を減らす | |
| Tytan TAA (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-i...もっと表示する Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. 表示を減らす | |
| Tytan TET (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane syste...もっと表示する Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane systems. 表示を減らす | |
| Tytan TIPT (Tetra Isopropyl Titanate) | Borica Co., Ltd. | Tytan TIPT can be used as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. It is most suitable for use in the glass and glass fiber manufacturing. | |
| Tytan TNBT (Tetra N-Butyl Titanate) | Borica Co., Ltd. | Tytan TNBT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNBZ (Tetra N-Butyl Zirconate) | Borica Co., Ltd. | Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPT (Tetra N-Propyl Titanate) | Borica Co., Ltd. | Tytan TNPT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPZ (Tetra N-Propyl Zirconate) | Borica Co., Ltd. | Tytan TNPZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan X85 (Titanate Crosslinker) | Borica Co., Ltd. | Tytan X85 is used as a cross linking agent for hydroxylic compounds. It is also used as a component of heat and corrosion resistant paints. | |
| UW Polyamine | Epoxy Chemicals, Inc. | UW Polyamine is an amine curing agent suited for use in under water applications. This product has hydrophobic molecules which react into the backbone to impart damp and underwater adhesion. It finds application in splash zone compounds and coatings, pile...もっと表示する UW Polyamine is an amine curing agent suited for use in under water applications. This product has hydrophobic molecules which react into the backbone to impart damp and underwater adhesion. It finds application in splash zone compounds and coatings, pile grout, underwater injection mortars, and DOT epoxies. 表示を減らす | |
| UWL Polyamine | Epoxy Chemicals, Inc. | UWL Polyamine is an amine curing agent suited for use in underwater or damp applications. This product combines hydrophobic nature of the hardener with long working life. It can be used to improve damp adhesion for existing coating or flooring systems, it...もっと表示する UWL Polyamine is an amine curing agent suited for use in underwater or damp applications. This product combines hydrophobic nature of the hardener with long working life. It can be used to improve damp adhesion for existing coating or flooring systems, it can also find application in splash zone compounds, pile grout resins, underwater injection resins, underwater coatings, and grouts and mortars. 表示を減らす |
