| Agrocer® Blue 153 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning o...もっと表示する Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Blue 153 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. 表示を減らす | Request Sample |
| Agrocer® Green 007 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning ...もっと表示する Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Green 007 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. 表示を減らす | Request Sample |
| Agrocer® Red 112 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...もっと表示する Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 112 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. In comparison to Pigment Red 48:2, Agrocer® Red 112 disp. exhibits superior compatibility in pesticide formulations and seed coatings. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. 表示を減らす | Request Sample |
| Agrocer® Red 482 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...もっと表示する Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 482 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. 表示を減らす | Request Sample |
| Agrocer® Violet 023 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning...もっと表示する Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Violet 023 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. Agrocer® Violet 023 disp. gives very attractive color shades and seeds a high-quality appearance. All Agrocer dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. 表示を減らす | Request Sample |
| Aquanyl Blue AN 500 - Pigment Blue 15:0 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Blue AN 500 is a water-based dispersion of Pigment Blue 15:0. It is binder-free, solvent-free and based on nonionic and / or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Aquanyl® Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Aquanyl® Red D3GD 500 is an aqueous pigment dispersion recommended for water-based coatings and paints. | Request Sample |
| Aquanyl Yellow YT 100 - Pigment Yellow 65 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Yellow YT 100 is an aqueous pigment dispersion recommended for water-based coatings. | Request Sample |
| ASCONIUM® 110 | GSI Exim America, Inc. | ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...もっと表示する ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. 表示を減らす | |
| ASCONIUM® 111 | GSI Exim America, Inc. | ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 112 | GSI Exim America, Inc. | ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 114 | GSI Exim America, Inc. | ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 140 | GSI Exim America, Inc. | ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 141 | GSI Exim America, Inc. | ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 142DA | GSI Exim America, Inc. | ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 143 | GSI Exim America, Inc. | ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 144DA | GSI Exim America, Inc. | ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCOTRAN® AL4 | GSI Exim America, Inc. | ASCOTRAN® AL4 is an antiflash-rust additive. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H10 | GSI Exim America, Inc. | ASCOTRAN® H10 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H14 | GSI Exim America, Inc. | ASCOTRAN® H14 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® HPB | GSI Exim America, Inc. | ASCOTRAN® HPB is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| CARBODILITE™ E-02 | GSI Exim America, Inc. | CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE™ E-03A | GSI Exim America, Inc. | CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE E-05 | GSI Exim America, Inc. | CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinki...もっと表示する CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinking performance, good alkali resistance, and excellent dispersibility. This product is recommended for use as a crosslinker for waterborne resins which contains carboxyl group, crosslinker for industrial coatings, paints and ink where high spec performances are demanded, and as an adhesion promoter. 表示を減らす | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...もっと表示する CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. 表示を減らす | |
| CARBODILITE™ SW-12 G | GSI Exim America, Inc. | CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimi...もっと表示する CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimide 【─N＝C＝N─】, which reacts with carboxyl group. Product properties such as water resistance, chemical resistance and adhesion will be improved. CARBODILITE™ SW-12 G is a clear pale yellow liquid with 470 ※3 Carbodiimide Equivalent wt.※2. 表示を減らす | |
| CARBODILITE™ V-02 | GSI Exim America, Inc. | CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne ure...もっと表示する CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE™ V-02-L2 | GSI Exim America, Inc. | CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/...もっと表示する CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE V-02B | GSI Exim America, Inc. | CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodi...もっと表示する CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. This product is a clear pale yellow viscous liquid. 表示を減らす | |
| CARBODILITE™ V-04 | GSI Exim America, Inc. | CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch re...もっと表示する CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. Properties such as hydrolysis stability, adhesion, water, and chemical resistance are improved. 表示を減らす | |
| CARBODILITE™ V-10 | GSI Exim America, Inc. | CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water ...もっと表示する CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water resistance, chemical resistance and adhesion will be improved. This mutifunctional polycarbodiimide appears as a clear pale yellow liquid. The CARBODILITE™ Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| Colanyl Black N 131 - MX - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the ...もっと表示する Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. 表示を減らす | Request Sample |
| Colanyl Black N 500 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main app...もっと表示する Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. 表示を減らす | Request Sample |
| Colanyl Blue A2R 131 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...もっと表示する Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. 表示を減らす | Request Sample |
| Colanyl Blue A2R 500 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main ap...もっと表示する Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. 表示を減らす | Request Sample |
| Colanyl Blue A4R 130-MX - Pigment 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A4R 130-MX is a pigment dispersion based on phthalocyanine blue for water-based coatings. | Request Sample |
| Colanyl Blue B2G 131 - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...もっと表示する Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. 表示を減らす | Request Sample |
| Colanyl Carmine FBB 133-MX - Pigment Red 146 | Clariant Plastics and Coatings (Dispersions) | Colanyl Carmine FBB 133-MX is an aqueous pigment dispersion based on PR 146 for water-based coatings. | Request Sample |
| Colanyl Extender MS 530 - Filler | Clariant Plastics and Coatings (Dispersions) | Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC...もっと表示する Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* 表示を減らす | Request Sample |
| Colanyl Green GG 500 - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Green GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Oxide Black B 530 - Pigment Black 11 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.*...もっと表示する Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* 表示を減らす | Request Sample |
| Colanyl Oxide Black IR 500 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...もっと表示する Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings.* Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water based, VOC-free and VOC-low decorative coatings. 表示を減らす | Request Sample |
| Colanyl Oxide Blue COR 530 - Pigment Blue 28 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Blue COR 530 VP3210 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Green G 530 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings....もっと表示する Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* 表示を減らす | Request Sample |
| Colanyl Oxide Red B 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red B 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Red G 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Yellow BV 530 - Pigment Yellow 184 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow BV 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coating.* | Request Sample |
| Colanyl Oxide Yellow CR 530 - Pigment Brown 24 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings...もっと表示する Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* 表示を減らす | Request Sample |
| Colanyl Oxide Yellow R 132 - MX - Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because ...もっと表示する Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. 表示を減らす | Request Sample |
| Colanyl Oxide Yellow R 531- Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...もっと表示する Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings. 表示を減らす | Request Sample |
| Colanyl Pink E-WD 530 VP 5275 - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Colanyl Pink E-WD 530 VP 5275 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red D3GD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500 - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500-MX - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red F5RK 130 - MX - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 130 is an aqueous pigment dispersion based on PR 170 for water-based coatings. | Request Sample |
| Colanyl Red F5RK 500 - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 500 is a binder- and solvent-free, aqueous pigment preparation of Pigment Red 170 and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based coatings. | Request Sample |
| Colanyl Red FGR 530 - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red FGRG 130 - MX - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...もっと表示する Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. 表示を減らす | Request Sample |
| Colanyl Red GG 131 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the m...もっと表示する Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. 表示を減らす | Request Sample |
| Colanyl Red GG 500 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red HF3S 500 - Pigment Red 188 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red HF3S 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Scarlet GO 530 - Pigment Red 168 | Clariant Plastics and Coatings (Dispersions) | Colanyl Scarlet GO 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Violet RL 131 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of th...もっと表示する Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. 表示を減らす | Request Sample |
| Colanyl Violet RL 530 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 530 VP 5335 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White R 500 - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White RN 500 - MX - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White RN 500-MX is a very low VOC, water-based pigment preparation of Pigment White 6. It is binder-free, solvent-free and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Colanyl Yellow 2GXD 130 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of ...もっと表示する Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. 表示を減らす | Request Sample |
| Colanyl Yellow 2GXD 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow 5GX 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 5GX 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow FGL 500 - Pigment Yellow 97 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow FGL 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow G 132 - Pigment Yellow 1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...もっと表示する Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. 表示を減らす | Request Sample |
| Colanyl Yellow H3G 500 - Pigment Yellow 154 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow H3G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow HRD 500 - Pigment Yellow 83 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow HRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| CORONATE HR-T | GSI Exim America, Inc. | Coronate HR-T is a non-yellowing type isocyanate hardener for two-component paint which provides an excellent heat and weather resistant for the coated layer. This product is a pale yellow liquid. | |
| CORONATE HXLV | GSI Exim America, Inc. | CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely a...もっと表示する CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinish...もっと表示する CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint in...もっと表示する CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. This product is solvent-free. 表示を減らす | |
| CORONATE HXR90 | GSI Exim America, Inc. | CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints...もっと表示する CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR90B | GSI Exim America, Inc. | CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paint...もっと表示する CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE MPAX-75 | GSI Exim America, Inc. | CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyureth...もっと表示する CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyurethane paints with excellent weathering ability. CORONATE MPAX-75 is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| DAIPLACOAT RHC-530 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resis...もっと表示する DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| DAIPLACOAT RHC-731 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resista...もっと表示する DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| ETERNACOLL UW-1005-E | GSI Exim America, Inc. | ETERNACOLL UW-1005-E is a polyurethane dispersion. This product's film forms after casting on PET and it's thickness after drying is 100um. ETERNACOLL UW-1005-E has applications as a soft feel coating for automotive interiors as an example. | |
| FLOWLEN 8021N | GSI Exim America, Inc. | FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage ...もっと表示する FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage period. This white liquid is especially recommended for architectural coatings. 表示を減らす | |
| FLOWLEN AC-1190HF | GSI Exim America, Inc. | FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. Thi...もっと表示する FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-2000HF | GSI Exim America, Inc. | FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. ...もっと表示する FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-326F | GSI Exim America, Inc. | FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping i...もっと表示する FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping in thermo-setting systems. This product is a pale yellow liquid. 表示を減らす | |
| FLOWLEN AC-530 | GSI Exim America, Inc. | FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applic...もっと表示する FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applications. 表示を減らす | |
| FLOWLEN DOPA-17HF | GSI Exim America, Inc. | FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contri...もっと表示する FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contributes to getting fine particle sized pigment in a shorter time. Furthermore, a fine paint film can be obtained, with a high gloss and high sharpness. 表示を減らす | |
| FLOWLEN G-700 | GSI Exim America, Inc. | FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent ...もっと表示する FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent effects on improving dispersion stability with anti-sagging property for silica based matting agent. 表示を減らす | |
| FLOWLEN No. 50EHF | GSI Exim America, Inc. | FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coati...もっと表示する FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coatings, and it exhibits little negative influence on gloss and transparency of paint film. It also has no Hazardous Air Pollutants (HAPs). FLOWLEN No. 50EHF appears as a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN No. 90 | GSI Exim America, Inc. | FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-s...もっと表示する FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-solvent coatings. 表示を減らす | |
| FLOWLEN No. 95 | GSI Exim America, Inc. | FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transpare...もっと表示する FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transparent liquid. 表示を減らす | |
| FLOWLEN No. 99C | GSI Exim America, Inc. | FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to...もっと表示する FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to thermo-setting paints, 2-packed polyester urethane, 2K acrylic urethane and UV-cured paints etc. 表示を減らす | |
| FLOWLEN SB-520 | GSI Exim America, Inc. | FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage pe...もっと表示する FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage period. This product appears as a white liquid emulsion with a 20% non-volatile content. 表示を減らす | |
| FLOWLEN SH-290 | GSI Exim America, Inc. | FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the ...もっと表示する FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the baking condition. This product also shows excellent anti-settling property without strong flocculation defect. It appears in the form of a pale yellow paste. 表示を減らす | |
| FLOWLEN WS | GSI Exim America, Inc. | FLOWLEN WS is a water soluble acrylic copolymer that improves leveling properties and storage stability of pigment dispersion in paint systems. This pale yellow liquid is a leveling agent for water-based thermo-setting paints. | |
| FLOWLEN WS-30 | GSI Exim America, Inc. | FLOWLEN WS-30 is a levelling agent made of water thinnerable acrylic copolymer. It also prevents crawling, cratering and foam stabilizing. This pale yellow liquid is used for water-based thermo-setting coatings. | |
| FLOWLEN WS-314 | GSI Exim America, Inc. | FLOWLEN WS-314 is an anti-popping agent made of water thinnerable acrylic copolymer that prevents crawling, cratering and foam stabilizing. This product appears as a yellow liquid, and it is composed of an acrylic copolymer in 3-methyl-3-methoxy butanol. | |
| Hostafine Black T 30 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent...もっと表示する Hostafine Black T 30 is a pigment dispersion of approx. 30% pigment and is based on nonionic dispersing and wetting agents and glycol. The Colour Index of the basic pigment is Pigment Black 7. The extremly low particle size distribution gives an excellent gloss, transparency and sedimentation properties in aqueous systems. Hostafine pigment preparations are especially suitable for water-based transparent wood stains. They can also be used for other applications such as aqueous emulsion paints, glass paints, water-colors, latex and water resistant inks, inks for fiber-tip fineliner and roller-tip pens. A final evaluation in the customer system is necessary. 表示を減らす | Request Sample |
