| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...もっと表示する 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 表示を減らす | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...もっと表示する Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 表示を減らす | |
| ASCONIUM® 110 | GSI Exim America, Inc. | ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...もっと表示する ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. 表示を減らす | |
| ASCONIUM® 111 | GSI Exim America, Inc. | ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 112 | GSI Exim America, Inc. | ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 114 | GSI Exim America, Inc. | ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 140 | GSI Exim America, Inc. | ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 141 | GSI Exim America, Inc. | ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 142DA | GSI Exim America, Inc. | ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 143 | GSI Exim America, Inc. | ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 144DA | GSI Exim America, Inc. | ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCOTRAN® AL4 | GSI Exim America, Inc. | ASCOTRAN® AL4 is an antiflash-rust additive. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H10 | GSI Exim America, Inc. | ASCOTRAN® H10 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H14 | GSI Exim America, Inc. | ASCOTRAN® H14 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® HPB | GSI Exim America, Inc. | ASCOTRAN® HPB is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| CARBODILITE™ E-02 | GSI Exim America, Inc. | CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE™ E-03A | GSI Exim America, Inc. | CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE E-05 | GSI Exim America, Inc. | CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinki...もっと表示する CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinking performance, good alkali resistance, and excellent dispersibility. This product is recommended for use as a crosslinker for waterborne resins which contains carboxyl group, crosslinker for industrial coatings, paints and ink where high spec performances are demanded, and as an adhesion promoter. 表示を減らす | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...もっと表示する CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. 表示を減らす | |
| CARBODILITE™ SW-12 G | GSI Exim America, Inc. | CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimi...もっと表示する CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimide 【─N＝C＝N─】, which reacts with carboxyl group. Product properties such as water resistance, chemical resistance and adhesion will be improved. CARBODILITE™ SW-12 G is a clear pale yellow liquid with 470 ※3 Carbodiimide Equivalent wt.※2. 表示を減らす | |
| CARBODILITE™ V-02 | GSI Exim America, Inc. | CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne ure...もっと表示する CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE™ V-02-L2 | GSI Exim America, Inc. | CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/...もっと表示する CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE V-02B | GSI Exim America, Inc. | CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodi...もっと表示する CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. This product is a clear pale yellow viscous liquid. 表示を減らす | |
| CARBODILITE™ V-04 | GSI Exim America, Inc. | CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch re...もっと表示する CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. Properties such as hydrolysis stability, adhesion, water, and chemical resistance are improved. 表示を減らす | |
| CARBODILITE™ V-10 | GSI Exim America, Inc. | CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water ...もっと表示する CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water resistance, chemical resistance and adhesion will be improved. This mutifunctional polycarbodiimide appears as a clear pale yellow liquid. The CARBODILITE™ Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...もっと表示する Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 表示を減らす | |
| CORONATE HR-T | GSI Exim America, Inc. | Coronate HR-T is a non-yellowing type isocyanate hardener for two-component paint which provides an excellent heat and weather resistant for the coated layer. This product is a pale yellow liquid. | |
| CORONATE HXLV | GSI Exim America, Inc. | CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely a...もっと表示する CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinish...もっと表示する CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint in...もっと表示する CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. This product is solvent-free. 表示を減らす | |
| CORONATE HXR90 | GSI Exim America, Inc. | CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints...もっと表示する CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR90B | GSI Exim America, Inc. | CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paint...もっと表示する CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE MPAX-75 | GSI Exim America, Inc. | CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyureth...もっと表示する CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyurethane paints with excellent weathering ability. CORONATE MPAX-75 is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| DAIPLACOAT RHC-530 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resis...もっと表示する DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| DAIPLACOAT RHC-731 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resista...もっと表示する DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| ETERNACOLL UW-1005-E | GSI Exim America, Inc. | ETERNACOLL UW-1005-E is a polyurethane dispersion. This product's film forms after casting on PET and it's thickness after drying is 100um. ETERNACOLL UW-1005-E has applications as a soft feel coating for automotive interiors as an example. | |
| FLOWLEN 8021N | GSI Exim America, Inc. | FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage ...もっと表示する FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage period. This white liquid is especially recommended for architectural coatings. 表示を減らす | |
| FLOWLEN AC-1190HF | GSI Exim America, Inc. | FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. Thi...もっと表示する FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-2000HF | GSI Exim America, Inc. | FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. ...もっと表示する FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-326F | GSI Exim America, Inc. | FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping i...もっと表示する FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping in thermo-setting systems. This product is a pale yellow liquid. 表示を減らす | |
| FLOWLEN AC-530 | GSI Exim America, Inc. | FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applic...もっと表示する FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applications. 表示を減らす | |
| FLOWLEN DOPA-17HF | GSI Exim America, Inc. | FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contri...もっと表示する FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contributes to getting fine particle sized pigment in a shorter time. Furthermore, a fine paint film can be obtained, with a high gloss and high sharpness. 表示を減らす | |
| FLOWLEN G-700 | GSI Exim America, Inc. | FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent ...もっと表示する FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent effects on improving dispersion stability with anti-sagging property for silica based matting agent. 表示を減らす | |
| FLOWLEN No. 50EHF | GSI Exim America, Inc. | FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coati...もっと表示する FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coatings, and it exhibits little negative influence on gloss and transparency of paint film. It also has no Hazardous Air Pollutants (HAPs). FLOWLEN No. 50EHF appears as a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN No. 90 | GSI Exim America, Inc. | FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-s...もっと表示する FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-solvent coatings. 表示を減らす | |
| FLOWLEN No. 95 | GSI Exim America, Inc. | FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transpare...もっと表示する FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transparent liquid. 表示を減らす | |
| FLOWLEN No. 99C | GSI Exim America, Inc. | FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to...もっと表示する FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to thermo-setting paints, 2-packed polyester urethane, 2K acrylic urethane and UV-cured paints etc. 表示を減らす | |
| FLOWLEN SB-520 | GSI Exim America, Inc. | FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage pe...もっと表示する FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage period. This product appears as a white liquid emulsion with a 20% non-volatile content. 表示を減らす | |
| FLOWLEN SH-290 | GSI Exim America, Inc. | FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the ...もっと表示する FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the baking condition. This product also shows excellent anti-settling property without strong flocculation defect. It appears in the form of a pale yellow paste. 表示を減らす | |
| FLOWLEN WS | GSI Exim America, Inc. | FLOWLEN WS is a water soluble acrylic copolymer that improves leveling properties and storage stability of pigment dispersion in paint systems. This pale yellow liquid is a leveling agent for water-based thermo-setting paints. | |
| FLOWLEN WS-30 | GSI Exim America, Inc. | FLOWLEN WS-30 is a levelling agent made of water thinnerable acrylic copolymer. It also prevents crawling, cratering and foam stabilizing. This pale yellow liquid is used for water-based thermo-setting coatings. | |
| FLOWLEN WS-314 | GSI Exim America, Inc. | FLOWLEN WS-314 is an anti-popping agent made of water thinnerable acrylic copolymer that prevents crawling, cratering and foam stabilizing. This product appears as a yellow liquid, and it is composed of an acrylic copolymer in 3-methyl-3-methoxy butanol. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....もっと表示する Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 表示を減らす | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...もっと表示する Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 表示を減らす | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...もっと表示する Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 表示を減らす | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...もっと表示する Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 表示を減らす | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...もっと表示する Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 表示を減らす | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...もっと表示する Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 表示を減らす | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| NIPPOLLAN N-963 | GSI Exim America, Inc. | NIPPOLLAN N-963 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid applied in polyurethane based products such as synthetic leather, artificial leather, coat...もっと表示する NIPPOLLAN N-963 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-964 | GSI Exim America, Inc. | NIPPOLLAN N-964 is a polycarbonate diol that exhibits good durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artific...もっと表示する NIPPOLLAN N-964 is a polycarbonate diol that exhibits good durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-965 | GSI Exim America, Inc. | NIPPOLLAN N-965 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such a...もっと表示する NIPPOLLAN N-965 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-966 | GSI Exim America, Inc. | NIPPOLLAN N-966 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthet...もっと表示する NIPPOLLAN N-966 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-971 | GSI Exim America, Inc. | NIPPOLLAN N-971 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with a specific gravity of 1.07. It is applied in polyurethane based products such as syn...もっと表示する NIPPOLLAN N-971 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with a specific gravity of 1.07. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-972 | GSI Exim America, Inc. | NIPPOLLAN N-972 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthet...もっと表示する NIPPOLLAN N-972 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-980 | GSI Exim America, Inc. | NIPPOLLAN N-980 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid with a hydroxyl value of 52-60. It is applied in polyurethane based products such as synthetic...もっと表示する NIPPOLLAN N-980 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid with a hydroxyl value of 52-60. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-981 | GSI Exim America, Inc. | NIPPOLLAN N-981 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid applied in polyurethane based products such as synthetic leather, artificial leather, coatings...もっと表示する NIPPOLLAN N-981 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| Orgatix® TC-300 | GSI Exim America, Inc. | Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Org...もっと表示する Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-310 | GSI Exim America, Inc. | Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts cro...もっと表示する Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-315 | GSI Exim America, Inc. | Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgat...もっと表示する Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-400 | GSI Exim America, Inc. | Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® ...もっと表示する Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® ZC-126 | GSI Exim America, Inc. | Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries....もっと表示する Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...もっと表示する Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 表示を減らす | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...もっと表示する Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 表示を減らす | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...もっと表示する SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 表示を減らす | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...もっと表示する SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 表示を減らす | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...もっと表示する SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 表示を減らす | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...もっと表示する SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 表示を減らす | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...もっと表示する SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 表示を減らす | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...もっと表示する SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 表示を減らす | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...もっと表示する SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 表示を減らす | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...もっと表示する Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 表示を減らす | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...もっと表示する Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 表示を減らす | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...もっと表示する Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 表示を減らす | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...もっと表示する Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 表示を減らす | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...もっと表示する Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 表示を減らす | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...もっと表示する Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 表示を減らす | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...もっと表示する SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 表示を減らす | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...もっと表示する SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 表示を減らす | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...もっと表示する Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. 表示を減らす | |
| Sulfolane Anhydrous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...もっと表示する Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 表示を減らす | |
| Sulfolane Aqueous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...もっと表示する Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 表示を減らす | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...もっと表示する UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 表示を減らす |
