| ASCONIUM® 110 | GSI Exim America, Inc. | ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...もっと表示する ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. 表示を減らす | |
| ASCONIUM® 111 | GSI Exim America, Inc. | ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 112 | GSI Exim America, Inc. | ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 114 | GSI Exim America, Inc. | ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 140 | GSI Exim America, Inc. | ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 141 | GSI Exim America, Inc. | ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 142DA | GSI Exim America, Inc. | ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 143 | GSI Exim America, Inc. | ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...もっと表示する ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCONIUM® 144DA | GSI Exim America, Inc. | ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...もっと表示する ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. 表示を減らす | |
| ASCOTRAN® AL4 | GSI Exim America, Inc. | ASCOTRAN® AL4 is an antiflash-rust additive. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H10 | GSI Exim America, Inc. | ASCOTRAN® H10 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® H14 | GSI Exim America, Inc. | ASCOTRAN® H14 is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| ASCOTRAN® HPB | GSI Exim America, Inc. | ASCOTRAN® HPB is a ready-to-use, liquid-form antiflash-rust additive for any waterborne coating. It is ideal for use in any waterborne paint or coating, neutral or alkaline, for industrial, professional or do-it-yourself. | |
| CARBODILITE™ E-02 | GSI Exim America, Inc. | CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-02 is a crosslinking agent characterized by its longer pot-life. It has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE™ E-03A | GSI Exim America, Inc. | CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with ...もっと表示する CARBODILITE™ E-03A is a crosslinking agent with a higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite E-series is a polycarbodiimide based waterborne emulsion that contains a carbodiimide [─N═C═N─] group. 表示を減らす | |
| CARBODILITE E-05 | GSI Exim America, Inc. | CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinki...もっと表示する CARBODILITE E-05 is a VOC-free, polycarbodiimide-based dispersion type crosslinking agent. It helps improve various attributes, such as chemical resistance, abrasion/scratch resistance, and adhesiveness. It offers extra long pot life, excellent crosslinking performance, good alkali resistance, and excellent dispersibility. This product is recommended for use as a crosslinker for waterborne resins which contains carboxyl group, crosslinker for industrial coatings, paints and ink where high spec performances are demanded, and as an adhesion promoter. 表示を減らす | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...もっと表示する CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. 表示を減らす | |
| CARBODILITE™ SW-12 G | GSI Exim America, Inc. | CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimi...もっと表示する CARBODILITE™ SW-12 G is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional carbodiimides. This grade offers shorter curing time at lower and ambient temperatures. It contains carbodiimide 【─N＝C＝N─】, which reacts with carboxyl group. Product properties such as water resistance, chemical resistance and adhesion will be improved. CARBODILITE™ SW-12 G is a clear pale yellow liquid with 470 ※3 Carbodiimide Equivalent wt.※2. 表示を減らす | |
| CARBODILITE™ V-02 | GSI Exim America, Inc. | CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne ure...もっと表示する CARBODILITE™ V-02 is a standard grade crosslinking agent. This grade has a pH of 9-12, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE™ V-02-L2 | GSI Exim America, Inc. | CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/...もっと表示する CARBODILITE™ V-02-L2 is a crosslinking agent that is characterized by its higher functionality. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CARBODILITE V-02B | GSI Exim America, Inc. | CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodi...もっと表示する CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. This product is a clear pale yellow viscous liquid. 表示を減らす | |
| CARBODILITE™ V-04 | GSI Exim America, Inc. | CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch re...もっと表示する CARBODILITE™ V-04 is a crosslinking agent that is flexible and exhibits good adhesion. This grade has a pH of 6-9, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. The V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. Properties such as hydrolysis stability, adhesion, water, and chemical resistance are improved. 表示を減らす | |
| CARBODILITE™ V-10 | GSI Exim America, Inc. | CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water ...もっと表示する CARBODILITE™ V-10” is a multifunctional carbodiimide based crosslinking agent which provides higher crosslinking performance over conventional types, and it offers faster crosslinking performance under ambient conditions. Product properties such as water resistance, chemical resistance and adhesion will be improved. This mutifunctional polycarbodiimide appears as a clear pale yellow liquid. The CARBODILITE™ Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. V-series is a multifunctional crosslinker that reacts with active hydrogen compounds. 表示を減らす | |
| CORONATE HR-T | GSI Exim America, Inc. | Coronate HR-T is a non-yellowing type isocyanate hardener for two-component paint which provides an excellent heat and weather resistant for the coated layer. This product is a pale yellow liquid. | |
| CORONATE HXLV | GSI Exim America, Inc. | CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely a...もっと表示する CORONATE HXLV is a HDI based modified polyisocyanate, containing isocyanurate. This product is a solvent-free hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinish...もっと表示する CORONATE HXR is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. This product is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. 表示を減らす | |
| CORONATE HXR | GSI Exim America, Inc. | CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint in...もっと表示する CORONATE HXR is a HDI based modified polyisocyanate, containing isocyanurate. It is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adducts types of hardeners. CORONATE HXR or HXLV is widely accepted in the paint industry for various applications, such as motorbike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. This product is solvent-free. 表示を減らす | |
| CORONATE HXR90 | GSI Exim America, Inc. | CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints...もっと表示する CORONATE HXR90 is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity of 360-620 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE HXR90B | GSI Exim America, Inc. | CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paint...もっと表示する CORONATE HXR90B is a HDI based modified polyisocyanate, containing isocyanurate. This grade has a viscosity at 350-550 mm2/s. It contains approximately 90% of solid content with butyl acetate. This product is a hardener for non-yellowing type of PU paints, with superior performance to biuret or adduct types of hardeners. It appears as a pale yellow liquid. It is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| CORONATE MPAX-75 | GSI Exim America, Inc. | CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyureth...もっと表示する CORONATE MPAX-75 is a HDI based modified polyisocyanate, containing isocynurate. It contains approximately 75% of solid content with Xylene and Propyleneglycol monomethyle ether acetate. It is a hardener for two-component, non-yellowing types of polyurethane paints with excellent weathering ability. CORONATE MPAX-75 is widely accepted in the paint industry for various applications, such as motor bike parts, automotive refinishing, wood finishes, etc. This is because of its resistance to high heat, high solubility in solvents and good compatibility with polyols. 表示を減らす | |
| DAIPLACOAT RHC-530 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resis...もっと表示する DAIPLACOAT RHC-530 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 12～17µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| DAIPLACOAT RHC-731 CLEAR | GSI Exim America, Inc. | DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resista...もっと表示する DAIPLACOAT RHC-731 CLEAR is a crosslinked poly-urethane finely divided particle, developed by an advanced polymerization technique for paints and coatings. This grade has an average particle size of 5～8µm. It has excellent heat-resistance, solvent-resistance, and scratch resistance. It is possible to be dispersed by mixers and agitators because of its easy dispersibility. Furthermore, this product has narrow width of particle size distribution and sharp design. 表示を減らす | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...もっと表示する DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 表示を減らす | |
| DYHARD® 100M | AlzChem AG | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...もっと表示する DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 表示を減らす | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...もっと表示する DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 表示を減らす | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...もっと表示する DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 表示を減らす | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...もっと表示する DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 表示を減らす | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...もっと表示する DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 表示を減らす | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...もっと表示する DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 表示を減らす | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...もっと表示する DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 表示を減らす | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...もっと表示する DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 表示を減らす | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...もっと表示する DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 表示を減らす | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...もっと表示する DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 表示を減らす | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...もっと表示する DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 表示を減らす | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...もっと表示する DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 表示を減らす | |
| ETERNACOLL UW-1005-E | GSI Exim America, Inc. | ETERNACOLL UW-1005-E is a polyurethane dispersion. This product's film forms after casting on PET and it's thickness after drying is 100um. ETERNACOLL UW-1005-E has applications as a soft feel coating for automotive interiors as an example. | |
| FLOWLEN 8021N | GSI Exim America, Inc. | FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage ...もっと表示する FLOWLEN 8021N is an emulsion of polyether siloxane copolymer and fumed silica that prevents the formation of foam. It shows excellent defoaming effect during the production and the application of the emulsion paints. Its effect remains during the storage period. This white liquid is especially recommended for architectural coatings. 表示を減らす | |
| FLOWLEN AC-1190HF | GSI Exim America, Inc. | FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. Thi...もっと表示する FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-2000HF | GSI Exim America, Inc. | FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. ...もっと表示する FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-326F | GSI Exim America, Inc. | FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping i...もっと表示する FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping in thermo-setting systems. This product is a pale yellow liquid. 表示を減らす | |
| FLOWLEN AC-530 | GSI Exim America, Inc. | FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applic...もっと表示する FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applications. 表示を減らす | |
| FLOWLEN DOPA-17HF | GSI Exim America, Inc. | FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contri...もっと表示する FLOWLEN DOPA-17HF is a dispersant for solvent based paints. It is an acrylic polymer with pigment affinity groups in propylene glycol monomethyl ether acetate developed as the dispersant for carbon black. It decreases the viscosity of mill base and contributes to getting fine particle sized pigment in a shorter time. Furthermore, a fine paint film can be obtained, with a high gloss and high sharpness. 表示を減らす | |
| FLOWLEN G-700 | GSI Exim America, Inc. | FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent ...もっと表示する FLOWLEN G-700 is a pigment dispersant that appears as a yellowish brown viscous liquid. It can be used with any paint type, whether water-based or solvent-based. It has effects on wetting and dispersing inorganic pigments. In particular, it has excellent effects on improving dispersion stability with anti-sagging property for silica based matting agent. 表示を減らす | |
| FLOWLEN No. 50EHF | GSI Exim America, Inc. | FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coati...もっと表示する FLOWLEN No. 50EHF is an acrylic polymer in hydrotreated heavy naphtha and propyleneglycol monomethyl ether acetate. It has an excellent leveling effect, prevents cratering, and has a high compatibility with resins. This product is suitable for clear coatings, and it exhibits little negative influence on gloss and transparency of paint film. It also has no Hazardous Air Pollutants (HAPs). FLOWLEN No. 50EHF appears as a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN No. 90 | GSI Exim America, Inc. | FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-s...もっと表示する FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-solvent coatings. 表示を減らす | |
| FLOWLEN No. 95 | GSI Exim America, Inc. | FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transpare...もっと表示する FLOWLEN No. 95 is an acrylic copolymer with excellent levelling effect. It prevents cratering, prevents foaming and is especially recommended for thermo-setting coatings. This product is a leveling agent for non-aqueous coatings. It appears as a transparent liquid. 表示を減らす | |
| FLOWLEN No. 99C | GSI Exim America, Inc. | FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to...もっと表示する FLOWLEN No. 99C is a leveling agent that has excellent leveling effect and prevents resins from cratering with good compatibility. It appears in the form of a clear liquid and shows superior leveling effect for clear paints. This product can be applied to thermo-setting paints, 2-packed polyester urethane, 2K acrylic urethane and UV-cured paints etc. 表示を減らす | |
| FLOWLEN SB-520 | GSI Exim America, Inc. | FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage pe...もっと表示する FLOWLEN SH-290 is an emulsion of polyether siloxane copolymer and organic polymer, containing fumed silica. It shows excellent defoaming effect during the production and also the application of the emulsion paints. Its effect remains during the storage period. This product appears as a white liquid emulsion with a 20% non-volatile content. 表示を減らす | |
| FLOWLEN SH-290 | GSI Exim America, Inc. | FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the ...もっと表示する FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the baking condition. This product also shows excellent anti-settling property without strong flocculation defect. It appears in the form of a pale yellow paste. 表示を減らす | |
| FLOWLEN WS | GSI Exim America, Inc. | FLOWLEN WS is a water soluble acrylic copolymer that improves leveling properties and storage stability of pigment dispersion in paint systems. This pale yellow liquid is a leveling agent for water-based thermo-setting paints. | |
| FLOWLEN WS-30 | GSI Exim America, Inc. | FLOWLEN WS-30 is a levelling agent made of water thinnerable acrylic copolymer. It also prevents crawling, cratering and foam stabilizing. This pale yellow liquid is used for water-based thermo-setting coatings. | |
| FLOWLEN WS-314 | GSI Exim America, Inc. | FLOWLEN WS-314 is an anti-popping agent made of water thinnerable acrylic copolymer that prevents crawling, cratering and foam stabilizing. This product appears as a yellow liquid, and it is composed of an acrylic copolymer in 3-methyl-3-methoxy butanol. | |
| NIPPOLLAN N-963 | GSI Exim America, Inc. | NIPPOLLAN N-963 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid applied in polyurethane based products such as synthetic leather, artificial leather, coat...もっと表示する NIPPOLLAN N-963 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-964 | GSI Exim America, Inc. | NIPPOLLAN N-964 is a polycarbonate diol that exhibits good durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artific...もっと表示する NIPPOLLAN N-964 is a polycarbonate diol that exhibits good durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-965 | GSI Exim America, Inc. | NIPPOLLAN N-965 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such a...もっと表示する NIPPOLLAN N-965 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with excellent hydrolysis resistance. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-966 | GSI Exim America, Inc. | NIPPOLLAN N-966 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthet...もっと表示する NIPPOLLAN N-966 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-971 | GSI Exim America, Inc. | NIPPOLLAN N-971 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with a specific gravity of 1.07. It is applied in polyurethane based products such as syn...もっと表示する NIPPOLLAN N-971 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with a specific gravity of 1.07. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-972 | GSI Exim America, Inc. | NIPPOLLAN N-972 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthet...もっと表示する NIPPOLLAN N-972 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a pale yellow transparent liquid with outstanding durability. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-980 | GSI Exim America, Inc. | NIPPOLLAN N-980 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid with a hydroxyl value of 52-60. It is applied in polyurethane based products such as synthetic...もっと表示する NIPPOLLAN N-980 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid with a hydroxyl value of 52-60. It is applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| NIPPOLLAN N-981 | GSI Exim America, Inc. | NIPPOLLAN N-981 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid applied in polyurethane based products such as synthetic leather, artificial leather, coatings...もっと表示する NIPPOLLAN N-981 is a polycarbonate diol that exhibits excellent hydrolysis resistance, durability and improved flexibility. This is a white or pale yellow solid applied in polyurethane based products such as synthetic leather, artificial leather, coatings resin, paint, adhesive, elastomer and thermoplastic resin. 表示を減らす | |
| Orgatix® TC-300 | GSI Exim America, Inc. | Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Org...もっと表示する Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-310 | GSI Exim America, Inc. | Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts cro...もっと表示する Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-315 | GSI Exim America, Inc. | Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgat...もっと表示する Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® TC-400 | GSI Exim America, Inc. | Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® ...もっと表示する Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| Orgatix® ZC-126 | GSI Exim America, Inc. | Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries....もっと表示する Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. 表示を減らす | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...もっと表示する SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. 表示を減らす | |
| Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. |
