| Acryl-EZE® | Colorcon Ltd | Acryl-EZE® is a one-step, aqueous acrylic enteric system that combines the benefits of a fully formulated coating system with the features and performance of a globally accepted enteric polymer (EUDRAGIT® L100-55). Acryl-EZE® saves time in development and...veja mais Acryl-EZE® is a one-step, aqueous acrylic enteric system that combines the benefits of a fully formulated coating system with the features and performance of a globally accepted enteric polymer (EUDRAGIT® L100-55). Acryl-EZE® saves time in development and production since it is simple to disperse, dispersible in water within 30 minutes, requires no curing step, and is easy to clean up. It can be used for delayed release for a wide range of oral solid dosage forms, such as tablets, granules, and multiparticulates. veja menos | |
| Acryl-EZE® 93A | Colorcon Ltd | Acryl-EZE® 93A93A, aqueous acrylic enteric system, is a two-step, pigmented, delayed release film coating system specifically designed to provide enteric protection in elevated pH environments. Acryl-EZE® 93A offers the formulator flexibility to select th...veja mais Acryl-EZE® 93A93A, aqueous acrylic enteric system, is a two-step, pigmented, delayed release film coating system specifically designed to provide enteric protection in elevated pH environments. Acryl-EZE® 93A offers the formulator flexibility to select the plasticizer type and level, depending on the physiochemical properties of the pharmaceutical active or substrate. Acryl-EZE® 93A formulations are easily dispersed in water, for the application of a delayed release film coating to solid dosage forms such as tablets, granules and beads. The coating system can be color matched to meet marketing requirements and provides consistent, reproducible enteric protection and drug release profiles. veja menos | |
| Acryl-EZE® MP | Colorcon Ltd | Acryl-EZE® MP is a fully formulated, dry enteric acrylic coating system dispersible in water, for the application of an enteric film coating to multi-particulate solid dosage forms, such as beads, granules and drug crystals. Combining the benefits of a fu...veja mais Acryl-EZE® MP is a fully formulated, dry enteric acrylic coating system dispersible in water, for the application of an enteric film coating to multi-particulate solid dosage forms, such as beads, granules and drug crystals. Combining the benefits of a fully formulated coating system with a globally accepted enteric polymer (EUDRAGIT L100-55*), Acryl-EZE® MP is readily dispersible in water for easy application. The enteric coating provides consistent, reproducible delayed release profiles. veja menos | |
| Apperta® 1832 | GRACE | Apperta® 1832 is an epoxy-based, top coat solvent that works with the base coat to deliver the strongest white-pigment protection on the market. This two layer combination provides excellent flexibility, malleability, opacity, color coverage. Apperta® 183...veja mais Apperta® 1832 is an epoxy-based, top coat solvent that works with the base coat to deliver the strongest white-pigment protection on the market. This two layer combination provides excellent flexibility, malleability, opacity, color coverage. Apperta® 1832 offers spectacular protection against chemical attacks from chilies, chicken broths, and tomato-based ingredients. veja menos | |
| Apperta® 1833 | GRACE | Apperta® 1833 is an epoxy-derived, base coat solvent that works with the top coat to deliver the strongest white-pigment protection on the market. This two layer combination provides excellent flexibility, malleability, opacity, color coverage. Apperta® 1...veja mais Apperta® 1833 is an epoxy-derived, base coat solvent that works with the top coat to deliver the strongest white-pigment protection on the market. This two layer combination provides excellent flexibility, malleability, opacity, color coverage. Apperta® 1833 offers spectacular protection against chemical attacks from chilies, chicken broths, and tomato-based ingredients. veja menos | |
| Apperta® 1973 | GRACE | Apperta® 1973 is a water-clear, process resistant external lacquer for Easy Open and SOT can bodies and ends. This coating is compatible with aluminum, TFS (ECCS), and tinplate substrate materials as well as rubberized roller and Anilox™ film metering equ...veja mais Apperta® 1973 is a water-clear, process resistant external lacquer for Easy Open and SOT can bodies and ends. This coating is compatible with aluminum, TFS (ECCS), and tinplate substrate materials as well as rubberized roller and Anilox™ film metering equipment. It easily tolerates high-speed application, up to 6,500 sph, with minimal foaming. Apperta® 1973 is recommended with Darex® TH 1010-35 solvent. veja menos | |
| Apperta® 1976 | GRACE | Apperta® 1976 is a gold, process resistant external lacquer for Easy Open and SOT can bodies and ends. This coating is compatible with aluminum, TFS (ECCS), and tinplate substrate materials as well as rubberized roller and Anilox™ film metering equipment....veja mais Apperta® 1976 is a gold, process resistant external lacquer for Easy Open and SOT can bodies and ends. This coating is compatible with aluminum, TFS (ECCS), and tinplate substrate materials as well as rubberized roller and Anilox™ film metering equipment. It easily tolerates high-speed application, up to 6,500 sph, with minimal foaming. Apperta® 1976 is recommended with Darex® TH 1010-35 solvent. veja menos | |
| Celox™ | GRACE | Celox™, Grace Darex® Packaging Technologies’ patented oxygen scavenging technology, is a low cost solution to oxidation in beverages. It has the potential to control oxygen from all three sources: from the oxygen trapped in a bottle's headspace, oxygen d...veja mais Celox™, Grace Darex® Packaging Technologies’ patented oxygen scavenging technology, is a low cost solution to oxidation in beverages. It has the potential to control oxygen from all three sources: from the oxygen trapped in a bottle's headspace, oxygen dissolved in the beverage itself, and oxygen that enters through the packaging. veja menos | |
| Confectionery Ink® | Colorcon Ltd | Confectionery Ink®, custom edible monogramming inks, is formulated specially for printing directly onto food and confections. These edible printing inks are comprised of FDA approved ingredients, including FD&C colorants, resins and solvents. Confectioner...veja mais Confectionery Ink®, custom edible monogramming inks, is formulated specially for printing directly onto food and confections. These edible printing inks are comprised of FDA approved ingredients, including FD&C colorants, resins and solvents. Confectionery Ink® can be customized based on color and can be used to print on a variety of food products, such as monogramming hard panned confections or printing logos and designs on confections or baked goods. veja menos | |
| DARACLAR® 7500FF | GRACE | DARACLAR® 7500FF stabilizing agent is a synthetic amorphous silica appearing as white free flowing powder. This stabilizer is used for selective adsorption of haze-forming proteins from beer. It is added either together with the filter aid or by a separat...veja mais DARACLAR® 7500FF stabilizing agent is a synthetic amorphous silica appearing as white free flowing powder. This stabilizer is used for selective adsorption of haze-forming proteins from beer. It is added either together with the filter aid or by a separate dosing system to the beer during the filtration stage. The dosage used depends on the desired stability of the beer, but lies, in general, from 10-60 g/hl. DARACLAR® 7500FF beer stabilizer is recommended if moderate filtration speed is required. veja menos | |
| Dry Color Concentrate | Colorcon Ltd | Dry Color Concentrate is a self-opacifying, non-dusting dry coloring system for panned confectionery goods. The enhanced opacity and even coverage of the Dry Color Concentrate will allow for a reduction in mottling, a potential reduction in coating, devel...veja mais Dry Color Concentrate is a self-opacifying, non-dusting dry coloring system for panned confectionery goods. The enhanced opacity and even coverage of the Dry Color Concentrate will allow for a reduction in mottling, a potential reduction in coating, development of brighter colors, and improved yield per batch of color. This system is highly concentrated, so it saves costs by dramatically reducing the color usage level, shipping costs, and lower inventory carrying costs. veja menos | |
| ETHOCEL™ | Colorcon Ltd | ETHOCEL™ is a sustained release film coating made from a premium ethylcellulose polymer for use in a variety of pharmaceutical applications. This water-insoluble polymer can be used in extended release multiparticulate coating, the micro-encapsulation of ...veja mais ETHOCEL™ is a sustained release film coating made from a premium ethylcellulose polymer for use in a variety of pharmaceutical applications. This water-insoluble polymer can be used in extended release multiparticulate coating, the micro-encapsulation of actives, taste-masking of bitter actives, as an extended release binder in inert matrix systems, and as a solvent and extrusion granulation. This product has an excellent safety record and has been widely used by the pharmaceutical industry for over 50 years. veja menos | |
| Nutraficient® | Colorcon Ltd | Nutraficient® is an immediate release food supplement coating system that is specifically for nutritional, herbal and dietary supplement products regulated as foods. This cost-effective film coating system includes food approved, label-friendly raw materi...veja mais Nutraficient® is an immediate release food supplement coating system that is specifically for nutritional, herbal and dietary supplement products regulated as foods. This cost-effective film coating system includes food approved, label-friendly raw materials and available to manufacturers who want to enhance the appearance of their dietary supplement tablets. It is available in clear, high gloss, white or colored options and not only provides moisture protection but also helps overcome unpleasant tastes and odors. veja menos | |
| Nutrateric® | Colorcon Ltd | Nutrateric® is an aqueous enteric coating system designed specifically to meet the regulatory requirements for dietary supplement, nutritional and herbal products in the United States and North American regions. Tablets and capsules can be easily coated u...veja mais Nutrateric® is an aqueous enteric coating system designed specifically to meet the regulatory requirements for dietary supplement, nutritional and herbal products in the United States and North American regions. Tablets and capsules can be easily coated using standard processing equipment with reliable and reproducible enteric protection. veja menos | |
| Opacolor® | Colorcon Ltd | Opacolor®, liquid coloring system, is specially developed for hard planning of confectionery products. In the formulation of Opacolor®, FD&C pigments are blended in a sugar syrup base, with titanium dioxide to provide opacity. Formulations can be develope...veja mais Opacolor®, liquid coloring system, is specially developed for hard planning of confectionery products. In the formulation of Opacolor®, FD&C pigments are blended in a sugar syrup base, with titanium dioxide to provide opacity. Formulations can be developed using dextrose and sorbitol for sugarless panning. In some cases, Natural pigments (non-certified colorants) can be used if required. Opacolor® yields a confectionery product with exceptional color intensity, as well as unequaled batch to batch uniformity and reproducibility. veja menos | |
| Opadry® | Colorcon Ltd | Opadry® is a complete film coating system that combines polymer, plasticizer, and pigment, as required, in a dry concentrate. Opadry® film coatings result in attractive, elegant coatings on a variety of tablet cores. This system can easily be dispersed in...veja mais Opadry® is a complete film coating system that combines polymer, plasticizer, and pigment, as required, in a dry concentrate. Opadry® film coatings result in attractive, elegant coatings on a variety of tablet cores. This system can easily be dispersed in aqueous or organic solvent solutions. With its excellent film forming capabilities, Opadry® provides high opacity and tensile strength, sharp logo definition, and good adhesion with batch-to-batch color consistency. veja menos | |
| Opadry® 200 | Colorcon Ltd | Opadry® 200 is an immediate release, fully formulated, one-step, PVA (polyvinyl-alcohol)-based aqueous film coating. This coating offers a high level of moisture retention and improved final product color stability combined with fast coating process times...veja mais Opadry® 200 is an immediate release, fully formulated, one-step, PVA (polyvinyl-alcohol)-based aqueous film coating. This coating offers a high level of moisture retention and improved final product color stability combined with fast coating process times. Products coated with Opadry® 200 have a smooth, high gloss quality finish and excellent logo definition. This coating is recommended as an immediate release coating for use with NCE, OTC, and generic products requiring moisture protection. veja menos | |
| Opadry® amb | Colorcon Ltd | Opadry® amb is a pigmented or white film coating system specifically developed for the coating of oral solid-dosage forms that need to be protected from environmental moisture. Studies on moisture penetration and transmission rates have demonstrated that ...veja mais Opadry® amb is a pigmented or white film coating system specifically developed for the coating of oral solid-dosage forms that need to be protected from environmental moisture. Studies on moisture penetration and transmission rates have demonstrated that Opadry® amb provides unrivaled protection, making it the suitable for immediate release tablets and multi-particulates that require extreme moisture protection. The Opadry® amb system provides fast hydration, excellent logo definition, a smooth tablet finish, and rapid equipment clean down with water. veja menos | |
| Opadry® CA | Colorcon Ltd | Opadry® CA is a sustained release, fully formulated osmotic coating system that uses a semipermeable membrane to ensure consistent release from osmotic pump tablets. This cellulose acetate polymer lowers manufacturing time, ensures consistent coating qual...veja mais Opadry® CA is a sustained release, fully formulated osmotic coating system that uses a semipermeable membrane to ensure consistent release from osmotic pump tablets. This cellulose acetate polymer lowers manufacturing time, ensures consistent coating quality, lowers raw material inventory, QC testing, and documentation costs. veja menos | |
| Opadry® Enteric | Colorcon Ltd | Opadry® Enteric is a platform of fully formulated delayed release acrylic-based coating systems that is suitable for application by organic or hydro-alcoholic processing techniques. All Opadry® Enteric systems allow for rapid dispersion preparation and ap...veja mais Opadry® Enteric is a platform of fully formulated delayed release acrylic-based coating systems that is suitable for application by organic or hydro-alcoholic processing techniques. All Opadry® Enteric systems allow for rapid dispersion preparation and application with many types of coating equipment, including conventional pans. Available in white, clear and pigmented, this complete, color matched, dry powder formulation offers a batch-to-batch color guarantee and is suitable for use with highly moisture sensitive materials. veja menos | |
| Opadry® fx™ | Colorcon Ltd | Opadry® fx™ is an immediate release, aqueous film coating system designed to impart a pearlescent and lustrous finish on a solid dosage form. The Opadry® fx™ system can be used to create a nearly infinite number of shades and hues along with high levels o...veja mais Opadry® fx™ is an immediate release, aqueous film coating system designed to impart a pearlescent and lustrous finish on a solid dosage form. The Opadry® fx™ system can be used to create a nearly infinite number of shades and hues along with high levels of gloss to help create a unique appearance, which can create novel products with existing assets. Opadry® fx™ is an effective coating system that is easy to use, cleans with water, and is applied utilizing standard film coating equipment and techniques. veja menos | |
| Opadry® II | Colorcon Ltd | Opadry® II is a immediate release complete aqueous film coating system that offers short process times and a superior film finish for pharmaceutical and nutritional oral solid dosage forms. The Opadry® II product range consists of fully formulated dry ble...veja mais Opadry® II is a immediate release complete aqueous film coating system that offers short process times and a superior film finish for pharmaceutical and nutritional oral solid dosage forms. The Opadry® II product range consists of fully formulated dry blend systems containing polymer, plasticizer, and pigment. These systems are water soluble, pH independent, reduce coating process time, increasing production capacity, and superior product appearance. veja menos | |
| Opadry® NS | Colorcon Ltd | Opadry® NS is an immediate release, complete film coating system for nutritional supplements. This fully-formulated, one-step customized coating system combines polymer, plasticizer and if desired, pigments, as complete, dry concentrates. All Opadry® NS f...veja mais Opadry® NS is an immediate release, complete film coating system for nutritional supplements. This fully-formulated, one-step customized coating system combines polymer, plasticizer and if desired, pigments, as complete, dry concentrates. All Opadry® NS formulations are made from food approved, label-friendly raw materials with Identity Preserved (IP) and non-GMO options available. Opadry® NS formulations are tailored to individual needs or can be used without pigment to give a glossy, natural appearance. veja menos | |
| Opadry® NutraPure™ | Colorcon Ltd | Opadry® NutraPure™ is an aqueous clear certified organic coating providing a natural coating for tablets and shellac-based food glazes. This product is similar to sugar coating, enhancing the natural look of supplements and food. | |
| Opadry® Type F® | Colorcon Ltd | Opadry® Type F®, food coating system, is a dry concentrate, that when mixed with water can be used as a film coating. Opadry® Type F® exhibits unique physical characteristics that allow it to serve as a functional barrier coating in moisture and oil relat...veja mais Opadry® Type F®, food coating system, is a dry concentrate, that when mixed with water can be used as a film coating. Opadry® Type F® exhibits unique physical characteristics that allow it to serve as a functional barrier coating in moisture and oil related applications. veja menos | |
| Opaglos® | Colorcon Ltd | Opaglos®, tablet core sealant product, is a unique and versatile glaze which produces dazzling high gloss finishes. Opaglos® can provide a functional barrier to moisture and oil. | |
| Opaglos® GO-8 Series | Colorcon Ltd | Opaglos® GO-8 Series is a oil-wax system that can be applied as a sealant on inclusions, such as dry roasted nuts, to prevent sogginess. | |
| Opaglos® GS-2 Series | Colorcon Ltd | Opaglos® GS-2 Series is a shellac polymer system that can be used as an effective moisture barrier for products hygroscopic in nature (i.e. pectin or starch based products, dried fruits, raisins, etc.). It can also be used as a fat barrier to effectively ...veja mais Opaglos® GS-2 Series is a shellac polymer system that can be used as an effective moisture barrier for products hygroscopic in nature (i.e. pectin or starch based products, dried fruits, raisins, etc.). It can also be used as a fat barrier to effectively limit the migration of fats or oils onto or into another substrate and prevent colors “bleeding” off a variety of substrates when baked. veja menos | |
| Opalux® | Colorcon Ltd | Opalux® is an immediate release color coating product. This opaque, aqueous, color dispersion in a concentrate of sucrose syrup is Formulated with lake and oxide pigments to produce an elegant finished product. An Opalux® coated product will feature impro...veja mais Opalux® is an immediate release color coating product. This opaque, aqueous, color dispersion in a concentrate of sucrose syrup is Formulated with lake and oxide pigments to produce an elegant finished product. An Opalux® coated product will feature improved color uniformity when compared with alternative products where color is imparted with dye. The advantages of Opalux® include improved light stability over comparative dye shades, relatively easy operator training, production economies, non-frosting qualities, and guaranteed batch to batch color reproducibility and precision color matching. veja menos | |
| Opatint® | Colorcon Ltd | Opatint®, liquid color concentrate, is custom formulated color dispersion using approved colorants and a liquid vehicle application. Vehicles used include: hydrogenated vegetable oil, fractionated coconut oil, glycerine, propylene glycol, sugar solution, ...veja mais Opatint®, liquid color concentrate, is custom formulated color dispersion using approved colorants and a liquid vehicle application. Vehicles used include: hydrogenated vegetable oil, fractionated coconut oil, glycerine, propylene glycol, sugar solution, sorbitol, dextrose solution, and water. Opatint® dispersions can be formulated using FD&C aluminum lakes, FD&C dyes, and/or natural pigments. This product can be used in compound coatings, icings, hard candies, gums, starch molded confections, soft panned candies, and baked goods. veja menos | |
| PEARLICOAT® A | Colorcon Ltd | PEARLICOAT® A, pearlescent coating system, is a complete aqueous coating system that can be used to create a unique pearlescent appearance when added to the surface of food products. PEARLICOAT® A is a dry powder that is intended to be reconstituted with ...veja mais PEARLICOAT® A, pearlescent coating system, is a complete aqueous coating system that can be used to create a unique pearlescent appearance when added to the surface of food products. PEARLICOAT® A is a dry powder that is intended to be reconstituted with water, or can be used alone, and is available in 6 pearly colors: gold, red, green, purple, silver, and blue. This product can be used on foods such as moulded or enrobed chocolates, pretzels, cookies, crackers, other baked goods, licorice, panned confections and gums. veja menos | |
| PEARLICOAT® S | Colorcon Ltd | PEARLICOAT® S, pearlescent coating system, is a complete coating system that can be used to create a unique pearlescent appearance when coated onto the surface of food products. This easy to use solvent-based system is available in 6 sparkling colors: gol...veja mais PEARLICOAT® S, pearlescent coating system, is a complete coating system that can be used to create a unique pearlescent appearance when coated onto the surface of food products. This easy to use solvent-based system is available in 6 sparkling colors: gold, red, green, purple, silver, and blue. PEARLICOAT® S is a versatile system that can be used as a surface decoration on panned confections for a speckled or marbled effect, or spray applied for a more overall effect. The colorant found in PEARLICOAT® S is Kosher certified. veja menos | |
| PERKASIL® SM 500 F | GRACE | PERKASIL® SM 500 F Precipitated Silica is flavorless and odorless synthetic amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC)...veja mais PERKASIL® SM 500 F Precipitated Silica is flavorless and odorless synthetic amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC), the European Directive 2008/84/EC for E 551, Japan’s Specifications and Standards for Food Additives (D325) and the Chinese National Standard HG 2791-1996 Class III. It has a broad application portfolio in the consumer and agriculture markets and mainly serves as: anti-caking and free flow agent for food/feed additives and nutrients as well as dietary minerals and salts, liquid carrier and free-flow aid for vitamins, cosmetics, flavors and fragrances, edible oils and fats and antioxidants and anti-caking and processing aid for all kind of agricultural products. veja menos | |
| QuickColor® | Colorcon Ltd | QuickColor®, dry coloring system, from Colorcon® a Patent Pending agglomerated, non-dusting color delivery system which is easily measurable and quickly dispersible in hard candy products. This dry color system offers productivity improvements and cost sa...veja mais QuickColor®, dry coloring system, from Colorcon® a Patent Pending agglomerated, non-dusting color delivery system which is easily measurable and quickly dispersible in hard candy products. This dry color system offers productivity improvements and cost savings over other liquid systems, since it is easier to ship and store, it requires no premixing or shaking, reduced number of color changes and weighing errors, and cleanup is fast and easy with reduced risk of cross contamination. veja menos | |
| Sistiaga™ | GRACE | Sistiaga™ is a line of aluminum container coatings that can be used for food and beverage applications. These solvent-based internal coatings function to preserve the integrity of aluminum containers by protecting the aluminum from corrosive impact. Inter...veja mais Sistiaga™ is a line of aluminum container coatings that can be used for food and beverage applications. These solvent-based internal coatings function to preserve the integrity of aluminum containers by protecting the aluminum from corrosive impact. Internal coatings improve the shelf life of containers and remain neutral from an organoleptic perspective. veja menos | |
| StarCap 1500® | Colorcon Ltd | StarCap 1500® is a unique co-processed mixture of globally accepted excipients, corn starch and pregelatinized starch, designed for use in capsules and tablets. This inert free-flowing compressible excipient has excellent disintegration characteristics. T...veja mais StarCap 1500® is a unique co-processed mixture of globally accepted excipients, corn starch and pregelatinized starch, designed for use in capsules and tablets. This inert free-flowing compressible excipient has excellent disintegration characteristics. The flow properties of StarCap1500® are ideal for capsule filling applications. It flows smoothly with minimal dusting or adherence to contact surfaces. Manufactured in a cGMP facility dedicated to the pharmaceutical industry and supported by a team of technical experts, this product exhibits good physical, chemical, and microbiological stability. veja menos | |
| Starch 1500® | Colorcon Ltd | Starch 1500® is a partially pregelatinized maize starch. This unique pharmaceutical excipient combines several properties in a single product: binder, disintegrant, filler and flow-aid while having lubricant properties. This product is versatile and can b...veja mais Starch 1500® is a partially pregelatinized maize starch. This unique pharmaceutical excipient combines several properties in a single product: binder, disintegrant, filler and flow-aid while having lubricant properties. This product is versatile and can be used in a variety of processing methods for solid oral and dosage forms, including direct compression, wet granulation, dry granulation/roller compaction, and encapsulation. veja menos | |
| SYLODENT® 753 Silica | GRACE | SYLODENT® 753 Silica gel is synthetic, amorphous silica appearing as a fine white powder that is taste and odor free. It meets all of the test and monograph requirements for Silicon Dioxide contained in the latest Food Chemical Codex (FCC) and Japan’s Spe...veja mais SYLODENT® 753 Silica gel is synthetic, amorphous silica appearing as a fine white powder that is taste and odor free. It meets all of the test and monograph requirements for Silicon Dioxide contained in the latest Food Chemical Codex (FCC) and Japan’s Specifications and Standards for Food Additives editions. It also meets the test and monograph requirements in the latest European Pharmacopoeia (EP) edition for Silica, Dental Type. SYLODENT® 753 Silica is a highly efficient abrasive with low to moderate hardness, which is carefully controlled to give the required cleaning power when used in toothpaste formulations at between 5% and 25%. Typically, expected RDA (Radioactive Dentine Abrasion) level at 20% loading in a toothpaste formulation would be approximately 100. This has excellent compatibility with sodium fluoride and with sodium monoflurophosphate, as well as other toothpaste ingredients. veja menos | |
| SYLOID® 244 | GRACE | SYLOID® 244 material is synthetic, amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC), the latest edition of Japan’s Specifica...veja mais SYLOID® 244 material is synthetic, amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC), the latest edition of Japan’s Specifications and Standards for Food Additives (D326) and European Directive 96/77/EC (monograph E551). SYLOID® 244 silica is recommended as a general purpose, high performance anti-caking, free-flow, and carrying agent for food and industrial applications. A combination of high pore volume with a large internal surface area makes it extremely efficient for these applications. It has a strong affinity for moisture and also for organic based liquids. It can adsorb up to two and a half times its own weight in liquid. veja menos | |
| SYLOID® 244 FP | GRACE | SYLOID® 244 FP material is synthetic amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF), for silica, d...veja mais SYLOID® 244 FP material is synthetic amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF), for silica, dental type as described in the latest edition of the European Pharmacopoeia (EP), and for the hydrated silicon dioxide as described in the latest edition of Japanese Pharmaceutical Excipients. SYLOID® 244 FP silica is a high pore volume silica gel with a large internal surface area. It has a strong affinity for moisture and organic based liquids. SYLOID® 244 FP silica can adsorb up to 1.6 ml of liquid per gram. SYLOID® 244 FP silica is particularly recommended as a glidant, tabletting-aid and carrier for pharmaceutical and personal care products. veja menos | |
| SYLOID® 63 FP | GRACE | SYLOID® 63 FP is a synthetic, amorphous silica appearing as a white, free-flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF) and for hydrated sil...veja mais SYLOID® 63 FP is a synthetic, amorphous silica appearing as a white, free-flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF) and for hydrated silicon dioxide as described in the latest edition of Japanese Pharmaceutical Excipients. SYLOID® 63FP also meets the test requirements in the latest edition of the Food Chemicals Codex (FCC). SYLOID® 63 FP is a low pore volume gel with a very large internal surface area. It has a strong affinity for moisture even at very low humidity levels. It is particularly recommended as a free flow and tabletting additive for pharmaceutical products where humidity must be kept to a minimum. veja menos | |
| SYLOID® 72 | GRACE | SYLOID® 72 is a synthetic, amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC), the latest edition of Japan’s Specifications an...veja mais SYLOID® 72 is a synthetic, amorphous silica appearing as a white free flowing powder. It meets the test requirements for silicon dioxide as described in the latest editions of the Food Chemicals Codex (FCC), the latest edition of Japan’s Specifications and Standards for Food Additives (D326) and European Directive 96/77/EC (monograph E 551). SYLOID® 72 is a moderate pore volume silica gel with large internal surface area. It has a strong affinity for moisture and organic based liquids across a broad range of conditions. SYLOID® 72 can adsorb up to 1.1 ml of a liquid per gram. SYLOID® 72 is particularly recommended as a glidant and tableting aid in nutraceuticals, as a carrier for liquids and to provide free-flow and anticaking properties to hygroscopic powders. SYLOID® 72 exhibits good moisture pickup over a broader range of moisture levels than practically any other silica. veja menos | |
| SYLOID® 72 FP | GRACE | SYLOID® 72 FP is a synthetic, amorphous silica appearing as a white, free-flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF) and for hydrated sil...veja mais SYLOID® 72 FP is a synthetic, amorphous silica appearing as a white, free-flowing powder. It meets the test requirements for silicon dioxide as described in the latest edition of United States Pharmacopoeia/National Formulary (USP/NF) and for hydrated silicon dioxide as described in the latest edition of Japanese Pharmaceutical Excipients. SYLOID® 72FP also meets the test requirements of the latest edition of the Food Chemicals Codex (FCC). SYLOID® 72 FP silica is a moderate pore volume silica gel with large internal surface area. It has a strong affinity for moisture across a broad range of moisture levels and also for organic based liquids. SYLOID® 72 FP silica can adsorb up to 1.1 ml of liquid per gram. SYLOID® 72 FP silica is recommended as a glidant and tabletting aid for pharmaceutical products and as a carrier and rheology modifier for liquid products, particularly where moisture control is also a concern. veja menos | |
| TriSyl® | GRACE | TriSyl® silica, used for Edible Oil Refining, is synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® silica for Edible Oil Refining can be used in the following operations, refining of all animal and vegetable o...veja mais TriSyl® silica, used for Edible Oil Refining, is synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® silica for Edible Oil Refining can be used in the following operations, refining of all animal and vegetable oils and fats, it electively removes phospholipids, associated trace metals and soaps in the oil refining process and as a “post-bleach” agent for removal of colloidal nickel and nickel soaps generated during hydrogenation. veja menos | |
| TriSyl® 300 | GRACE | TriSyl® 300 silica, used for Edible Oil Refining, is synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® 300 silica for Edible Oil Refining can be used in the following operations, refining of all animal and vege...veja mais TriSyl® 300 silica, used for Edible Oil Refining, is synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® 300 silica for Edible Oil Refining can be used in the following operations, refining of all animal and vegetable oils and fats, refining processes when there is a need to reduce the phosphorus level in feedstock which contains a high level of non-hydratable phospholipids, caustic refining, with reduced or no water washes (modified caustic refining process) and de-nickeling process, after oil hardening. veja menos | |
| TriSyl® P100 | GRACE | TriSyl® P100 silica, used in the purification of glyceride oils and methyl and waxy esters, is synthetic amorphous micronized silica appearing as white free flowing powder. It can be used in the following adsorptive applications as a refining or bleaching...veja mais TriSyl® P100 silica, used in the purification of glyceride oils and methyl and waxy esters, is synthetic amorphous micronized silica appearing as white free flowing powder. It can be used in the following adsorptive applications as a refining or bleaching aid for the removal of phospholipids, associated trace metals, and fatty acid neutralization soaps in the glyceride oil refining process, “post-bleach” adsorptive agent for removal of colloidal nickel and nickel soaps generated during hydrogenation and for the removal of soaps formed from alkali catalysts in interesterification and methanolysis (in lieu of water-washing). veja menos | |
| TriSyl® S615 | GRACE | TriSyl® S615 silica, used in the purification of glyceride oils and methyl and waxy esters, is a synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® S615 silica can be used as a refining or bleaching aid for ...veja mais TriSyl® S615 silica, used in the purification of glyceride oils and methyl and waxy esters, is a synthetic amorphous micronized silica hydrogel appearing as white free flowing powder. TriSyl® S615 silica can be used as a refining or bleaching aid for the removal of phospholipids, associated trace metals, and fatty acid neutralization soaps in the glyceride oil refining process. It can also be used as a “post-bleach” adsorptive agent for removal of colloidal nickel and nickel soaps generated during hydrogenation as well as for the removal of soaps formed from alkali catalysts in interesterification and methanolysis (in lieu of water-washing). TriSyl® S615 silica is the most effective TriSyl® silica hydrogel grade offered by Grace Davison in the U.S. Its application temperature range is the highest and broadest, and its adsorptive capacity for soaps, phosphatides, and trace metals is unparalleled. Properly applied, it also is the most economical grade to use. veja menos |
