| Amorphous Silica Microspheres & Nanospheres | Cospheric LLC | Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactan...展开 Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactants or stabilizers. Silane coatings enable silica microspheres to be modified to generate functional groups or alter surface properties. Additional advantage of silica microspheres is glass transition temperature of over 1000 degrees Celsius, which makes them suitable for high temperature applications. Silica microspheres and nanospheres are composed of synthetic amorphous silica made in a laboratory batch environment. 收起 | |
| Barium Titanate Glass Spheres & Microspheres | Cospheric LLC | Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much hig...展开 Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much higher refractive index compared to other glass formulations. Refractive Index is the ratio of the speed of light in a vacuum to the speed of light in the specified material - a description of how light slows down as it passes through an optical material. High refractive index microspheres are critical when used for optical systems where high refractive power is required such as endoscopy, micro-optics, defense and microscopy. Barium titanate glass microspheres will reflect back more light directly to the viewer. High index of refraction enables retroreflectivity which is often desired in guard rails, traffic signs, reflective paint, tape or clothing. Barium titanate glass hemispherically coated with aluminum ensures that the light bounces off the aluminum- coated half of the sphere and produces the retroreflective effect for high visibility in dark conditions. 收起 | |
| Borosilicate Glass Spheres & Microspheres | Cospheric LLC | Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon ...展开 Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon oxide (SiO2) and boron oxide (B2O3). Solid Glass Microspheres, also called glass beads, provide multiple benefits including enhanced processing, excellent chemical and heat resistance, thermal stability, low oil absorption, and are often used in automotive, electrical, household appliance, adhesives, packaging, paint and construction industries. Glass is non-toxic, extremely stable and recyclable. Cospheric specializes in solid glass microspheres with perfect sphericity, tight tolerances and particle size distributions for biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications. 收起 | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起 | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起 | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起 | |
| D-230 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor ...展开 D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor pressure, and high primary amine content to coatings and adhesives. 收起 | |
| D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...展开 D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. 收起 | |
| Density Marker Beads | Cospheric LLC | Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and ...展开 Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and sub-cellular particles. Generally a set of several density marker beads covering a range of densities is used. The gradient is calibrated with beads that float at different heights within the column. When a test sample is added to the column, it drops until the point of neutral buoyancy, and the density is determined from the calibration chart. Density gradient columns can be used to measure the density of any sample. 收起 | |
| Fluorescent & Phoshorescent Microspheres | Cospheric LLC | Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the part...展开 Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the particles by size to better understand which part of the process the spheres of the specific size were able to pass through, or where the contamination in the process is coming from. Polyethylene is inert to most solvents. Polyethylene microspheres are hydrophobic and need to be coated with surfactant prior to suspending in water or aqueous media. 收起 | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起 | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...展开 Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. 收起 | |
| M-2070 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water so...展开 M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water solubility to adhesives. 收起 | |
| Polyethylene Microspheres & Nanospheres | Cospheric LLC | Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. Neutrally-buoyant spherical polymer particles a...展开 Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. Neutrally-buoyant spherical polymer particles are specifically designed for suspension in fresh water, enabling flow visualization and PIV analysis of fluid flow in a device. It is often advantageous to color code the particles by size to better understand which part of the process the spheres of the specific size were able to pass through, or where the contamination in the process is coming from. Polyethylene is inert to most solvents. Polyethylene microspheres are hydrophobic and need to be coated with surfactant prior to suspending in water or aqueous media. 收起 | |
| Poly(methyl methacrylate) Spheres, Microspheres & Nanospheres | Cospheric LLC | Poly(methyl methacrylate), PMMA, or acrylic microspheres and spheres are spherical polymer beads that are a transparent thermoplastic synthesized from methyl methacrylate polymer. PMMA microbeads are known for high impact and heat resistance, and good ten...展开 Poly(methyl methacrylate), PMMA, or acrylic microspheres and spheres are spherical polymer beads that are a transparent thermoplastic synthesized from methyl methacrylate polymer. PMMA microbeads are known for high impact and heat resistance, and good tensile and flexural strength. These strong yet lightweight polymer microspheres are often used as spacers, fillers, and reference particles for a variety of specialty applications in life sciences, medical technology, MEMS, optics and development of high performance composites. Uncoated poly(methyl methacrylate) or PMMA microspheres and spheres are often used in manufacturing of porous ceramics, self assembled microfluidic devices, and in biomedical research. Also often used as a lightweight alternative to glass microspheres. 收起 | |
| Retroreflective Microspheres | Cospheric LLC | Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a p...展开 Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a partial aluminum coating. Aluminum (Al) coatings on microspheres offer advantages in developing retroreflective surfaces for high visibility materials and applications. The hemispherical (half-shell) aluminum coating creates the mechanism for retroreflectivity as the light passes through the clear half of the glass bead and “bounces” off the reflective aluminum-coated back surface, directing the light back to the source or the viewer. Additional surface coatings (silane or fluorochemical) ensure that the spheres remain on the surface of the formulation, thereby enhancing the effect of retroreflectivity. 收起 | |
| Soda Lime Glass Spheres & Microspheres | Cospheric LLC | Solid soda lime glass, also know as soda lime silicate glass, is the most common type of solid glass microspheres available. Solid Glass Microspheres, also called glass beads, provide multiple benefits including enhanced processing, excellent chemical and...展开 Solid soda lime glass, also know as soda lime silicate glass, is the most common type of solid glass microspheres available. Solid Glass Microspheres, also called glass beads, provide multiple benefits including enhanced processing, excellent chemical and heat resistance, thermal stability, low oil absorption, and are often used in automotive, electrical, household appliance, adhesives, packaging, paint and construction industries. Glass is non-toxic, extremely stable and recyclable. Cospheric specializes in solid glass microspheres with perfect sphericity, tight tolerances and particle size distributions for biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications. 收起 | |
| Stainless Steel Spheres & Microspheres | Cospheric LLC | Stainless Steel Spheres & Microspheres are part of a wide selection of size ranges of corrosion resistant stainless steel microspheres from 1um on up to 1.2mm. Highly spherical 304 Stainless Steel microspheres are often used as conductive spacers in bond ...展开 Stainless Steel Spheres & Microspheres are part of a wide selection of size ranges of corrosion resistant stainless steel microspheres from 1um on up to 1.2mm. Highly spherical 304 Stainless Steel microspheres are often used as conductive spacers in bond line applications or as high density test projectiles. 收起 | |
| T-5000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in c...展开 T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in coatings and acts as an adhesive in epoxy systems. 收起 | |
| TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...展开 TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. 收起 |
