| ACMO | Rahn AG | 丙烯酰吗啉。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| Amicure® CG-NA Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-NA Curing Agent is an unpulverized grade of dicyandiamide designed for use as a latent curing agent for epoxy resins in solventbased processes. It is ideal for use in electrical laminates, and solvent-based, pre-preg composites. | Request Sample |
| AMICURE® UR Curing Agent | Evonik Operations GmbH, BL Crosslinkers | AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. I...展开 AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. It is ideal for use in one-pack paste and film adhesives, heat-sure composites, and prepreg composites. 收起 | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| ANCAMIDE® 3201 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particu...展开 ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particularly for wet and high humid application areas. In addition the curing agent can be used for high-solid coatings for corrosion protection under severe conditions. 收起 | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起 | Request Sample |
| Ancamine® 2014AS/FG | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...展开 Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起 | Request Sample |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起 | Request Sample |
| Ancamine® 2442 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temp...展开 Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temperature activation, good shelf stability and high glass transition temperature, and can be used in many applications requiring latency and high performance. 收起 | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| DMAA | Rahn AG | DMAA是用于自由基固化油墨、涂料和粘合剂的反应稀释剂。其性质可概括如下：低粘度，良好的光学透明度，水溶性和良好的水蒸汽转化率。它还提供非常好的氧渗透和保水能力。DMAA及其均聚物是水溶性的。 | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 748 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 通用型稀释剂。低毒性和低蒸气压。反应速度慢，具有良好的降粘作用，可增进柔韧性并可改善对非极性表面的附着力 | Request Sample |
| EPODIL® 749 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 低挥发性稀释剂。很小程度地降低物理性能和反应活性。可应用于国内工程、电子灌装和封装 | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| EPODIL® LV5 DILUENT | Evonik Operations GmbH, BL Crosslinkers | Epodil LV5 diluent is a chemically inert, low viscosity liquid hydrocarbon resin. It is soluble in and compatible with a wide variety of epoxy resins as well as most curing agents. | Request Sample |
| EPOXY METHACRYLATE 97-053 | Rahn AG | 双酚A环氧二甲基丙烯酸酯。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| GENOCURE* BAPO | Rahn AG | 量为GENOCURE BAPO在色浆中通常使用0.1 to 1.5%。在白色油墨和涂料中，常结合GENOCURE CPK一起使用 | Request Sample |
| GENOCURE* BDK | Rahn AG | 安息香双甲醚，用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* BDMM | Rahn AG | 芳香族酮。Norrish I类光引发剂，适用于UV固化油墨、涂料和胶粘剂。它特别适合有色UV油墨应用 | Request Sample |
| GENOCURE* BMS | Rahn AG | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...展开 GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. 收起 | Request Sample |
| GENOCURE* BP | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* CPK | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* CQ | Rahn AG | 高纯度樟脑醌，对470nm左右光谱波段吸收最大。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* DEAP | Rahn AG | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...展开 GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. 收起 | Request Sample |
| GENOCURE* DETX | Rahn AG | 噻吨酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* DMHA | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* EHA | Rahn AG | 氨基苯。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK为配方提供更快，更有效的长波UV固化并适用于UV/LED应用的选择。它是用于UV固化油墨，涂料和粘合剂等的光引发剂。由于该产品含有Type II和烷基胺功能，GENOCURE* EMK可以单独使用，也和辅助型光引发剂以及胺类增效剂共同使用。这款产品推荐用于胶印油墨，凸版油墨，柔印油墨，木材应用中，以及允许一些黄色的UV/LED油墨和清漆。 | Request Sample |
| GENOCURE* EPD | Rahn AG | 氨基苯。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* ITX | Rahn AG | 噻吨酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LBC | Rahn AG | 液态混合光引发剂。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LBP | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* LTD | Rahn AG | GENOCURE* LTD是一种TPO/DMHA 1：1混合的有液体性质的混合物。它有优良的反应性，溶解性，和良好的表面/固化特点。 该产品用于抑黄清漆涂层，白色颜料和胶粘剂应用。 | Request Sample |
| GENOCURE* LTM | Rahn AG | 液态混合光引发剂。用作UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MBB | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MBF | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* MDEA | Rahn AG | 脂肪族胺。用于UV固化油墨、涂料和粘胶的增效剂。 | Request Sample |
| GENOCURE* PBZ | Rahn AG | 4-苯基二苯甲酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* PMP | Rahn AG | 芳族酮。用于UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* TPO | Rahn AG | 二苯基氧化磷，UV固化油墨、涂料和粘胶的光引发剂。 | Request Sample |
| GENOCURE* TPO-L | Rahn AG | 磷化氢氧化物，液体光引发剂，适合UV固化油墨、涂料和胶粘剂 | Request Sample |
| GENOMER* 1117LR | Rahn AG | GENOMER* 1117LR is non-yellowing and enhances toughness, flexibility, and adhesion to various substrates. The product does not contain TMPTA. | Request Sample |
| GENOMER* 1121M | Rahn AG | GENOMER* 1119和 GENOMER 1121M RAHN是两种新产品，使用了特殊单体。两种产品都是丙烯酸酯，推荐用于自由基固化油墨、涂料和胶粘剂。GENOMER* 1119是一种4-叔丁基环己基丙烯酸酯，而GENOMER* 1121M是一种甲基丙烯酸异冰片酯 | Request Sample |
| GENOMER* 1122 | Rahn AG | 单官能聚氨酯丙烯酸酯。用于自由基固化油墨、涂料和粘胶的活性稀释剂。 | Request Sample |
| GENOMER* 1122TF | Rahn AG | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...展开 GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. 收起 | Request Sample |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOMER* 1226 | Rahn AG | GENOMER* 1126 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a di-functional acrylate that exhibits low viscosity, low odor and good cutting power. | Request Sample |
| GENOMER* 1231 | Rahn AG | GENOMER* 1231是一种双官能丙烯酸酯，可以为UV/EB固化配方赋予良好的粘合性，硬度以及韧性。它提供出色的灵活度，出色的韧性，低黄变性，良好的耐热性和良好的耐化学性。这款产品推荐用于金属和金属化基材涂层，玻璃、塑料、木头和纸张涂层，光导纤维涂层，粘合剂，电子工业和油墨等。 | Request Sample |
| GENOMER* 1254M | Rahn AG | GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applicat...展开 GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applications. 收起 | Request Sample |
| GENOMER* 2235 | Rahn AG | 它是一种低黏度脂肪族环氧二丙烯酸酯树脂，用于快速固化油墨、涂料和粘胶。 | Request Sample |
| GENOMER* 2252 | Rahn AG | GENOMER 2252是一种双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 | Request Sample |
| GENOMER* 2252/GP25 | Rahn AG | GENOMER* 2252/GP25 is a Bisphenol A epoxy diacrylate in 25% GPTA. It is a resin for radically curable inks, coatings and adhesives. | Request Sample |
| GENOMER* 2252/TM20 | Rahn AG | GENOMER 2252/TM20是一种20%TMPTA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 | Request Sample |
| GENOMER* 2252/TP20 | Rahn AG | GENOMER 2252/TP20是一种20%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 | Request Sample |
| GENOMER* 2252/TP30 | Rahn AG | GENOMER 2252/TP30是一种30%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 | Request Sample |
| GENOMER* 2252/TP40 | Rahn AG | GENOMER 2252/TP40是一种40%TPGDA中的双酚A环氧二丙烯酸酯，可用于自由基固化油墨、涂料和粘结剂 | Request Sample |
| GENOMER* 2253 | Rahn AG | 改性乙烯基树脂。用于自由基固化油墨、涂料和粘胶的活性稀释剂。 | Request Sample |
| GENOMER* 2259 | Rahn AG | 改性乙烯基树脂。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 2263 | Rahn AG | 乙烯基树脂。用于自由基固化油墨、涂料和粘胶。 | Request Sample |
| GENOMER* 2280 | Rahn AG | GENOMER* 2280是一种改性双酚A环氧二丙烯酸脂。这中树脂适用于自由基固化油墨、涂料和粘胶。与标准双酚A丙烯酸脂相比，GENOMER* 2280具有更高的弹性和韧性，保持了快速固化响应、高抵抗力和高硬度的特性。 | Request Sample |
| GENOMER* 2281 | Rahn AG | GENOMER*2281是一种市面可见的改性双酚A环氧丙烯酸酯。凭借其双酚A环氧丙烯酸酯的主要性质，GENOMER*2281提供了高反应性，高硬度，弹性和韧性优良的平衡，并提供了良好的附着能力。 | Request Sample |
| GENOMER* 2312 | Rahn AG | GENOMER* 2312（环氧化豆油丙烯酯或ESOA）是一种环氧丙烯酸酯齐聚物，可应用于UV, EB自由基固化型油墨，涂料和胶黏剂中。它可以在多种应用中提供适度的功能性和粘度，出色的灵活性和良好的粘合性，同时还具有低皮肤刺激性。这款产品在分散时十分有效，可以在分散过程中为油墨提供出色的色彩湿润性，同时具有高光泽度，色彩保持度和优异的基材附着力。同样的，在纸张、金属和木料涂料中，GENOMER* 2312有助于提供出色的韧性，灵活性，以及抗褶皱和耐刮伤性能。 | Request Sample |
| GENOMER* 3135 | Rahn AG | GENOMER* 3135 exhibiting excellent elongation and flexibility it can be used to improve flexibility in inks and coatings or used to increase modulus, strength and elongation in 3D printed products. GENOMER* 3135 has with 65% a high bio-renewable content. | Request Sample |
| GENOMER* 3143 | Rahn AG | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOMER* 3364 | Rahn AG | 改性聚醚多元醇丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 3414 | Rahn AG | 改性聚醚丙烯酸酯。用于自由基固化油墨、涂料和粘胶。 | Request Sample |
| GENOMER* 3430 | Rahn AG | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...展开 GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. 收起 | Request Sample |
| GENOMER* 3457 | Rahn AG | GENOMER* 3457是一种中等粘度的产品，有高反应性，良好的耐刮擦性和耐溶剂性，中等灵活性和在各种基材上出色的粘合度。它推荐用于木材、纸张、金属和塑料涂料，油墨和清漆，工业涂料和粘合剂以及生产应用添加剂中等。 | Request Sample |
| GENOMER* 3486 | Rahn AG | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...展开 GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. 收起 | Request Sample |
| GENOMER* 3497 | Rahn AG | 改性聚醚多元醇丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 3498 | Rahn AG | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| GENOMER* 3611 | Rahn AG | 脂肪酸改性的聚酯丙烯酸酯。作为可自由基固化的油墨，涂料和胶粘剂用树脂。推荐用于需要高反应活性和良好颜料润湿性的应用中。具有非常好的颜料润湿性，高反应活性，良好的耐刮擦性能和耐溶剂性能，高耐磨性和非常好的平版印刷效果。 | Request Sample |
| GENOMER* 4188/EHA | Rahn AG | 以EHA为溶剂的单官能聚氨酯丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4188/M22 | Rahn AG | 以GENOMER 1122为溶剂的单官能聚氨酯丙烯酸酯。用于自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4205 | Rahn AG | 脂肪族聚氨酯甲基丙烯酸酯。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4212 | Rahn AG | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...展开 GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. 收起 | Request Sample |
| GENOMER* 4215 | Rahn AG | 脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4215/M22 | Rahn AG | 以GENOMER1122为载体的脂肪族聚酯聚氨酯丙烯酸。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4217 | Rahn AG | 柔韧的芳香族氨基甲酸酯丙烯酸酯。作为可自由基固化的油墨，涂料和胶粘剂用树脂。GENOMER 4217可推荐用于需要高附着力和柔韧性的应用场合。 | Request Sample |
| GENOMER* 4230 | Rahn AG | 脂肪族聚氨酯丙烯酸酯。用于自由基固化油墨，涂料和胶黏剂。GENOMER* 4230的固化膜十分柔软，灵活且不黄变。GENOMER* 4230可以作为改性剂使用，可以提高成品配方的灵活性。 | Request Sample |
| GENOMER* 4247 | Rahn AG | GENOMER* 4247是一款用于固化涂料的2官能度脂肪族丙烯酸类聚氨酯。它具有高硬度，高抗刮擦和耐磨性，以及高透明度、澄清度和光泽度。它具有低黄变特性，良好的附着力，低粘度和中高反应性。这款产品提供具有出色硬度和良好的机械性能的膜。它推荐用于清漆和有色涂料中。 | Request Sample |
| GENOMER* 4256 | Rahn AG | 脂肪族聚氨酯甲基丙烯酸酯。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4259 | Rahn AG | GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...展开 GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. 收起 | Request Sample |
| GENOMER* 4267 | Rahn AG | 脂肪族聚氨酯丙烯酸酯，用于辐射固化油墨、涂料和胶粘剂。推荐用于既需要弹性又需要硬度的配方体系。 | Request Sample |
| GENOMER* 4269/M22 | Rahn AG | 以GENOMER1122为载体的脂肪族聚氨酯丙烯酸酯。用作自由基固化涂料和粘胶的树脂。 | Request Sample |
| GENOMER* 4277 | Rahn AG | GENOMER* 4277 is an aliphatic urethane acrylate. It is a resin for radically coatings. It provides high flexibility and toughness, good adhesion, and high viscosity. | Request Sample |
| 新 GENOMER* 4281 | Rahn AG | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
| GENOMER* 4293 | Rahn AG | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| GENOMER* 4297 | Rahn AG | 脂肪族聚氨酯二甲基丙烯酸酯。用作自由基固化油墨、涂料和粘胶的树脂。 | Request Sample |
