| Ammonium Polyphosphate(APP) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for mul...展开 Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for multistory buildings, ships, trains, and cable applications. 收起 | |
| Ammonium Polyphosphate(Phase II) | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubb...展开 Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubber, and expandable fireproof coating. 收起 | |
| Ammonium Polyphosphate(phase-II) treated by epoxy resin | Shifang Changfeng Chemical Co., Ltd. | Ammonium Polyphosphate(phase-II) treated by epoxy resin solubility in water is very low and has less influence in polymers. This product is most commonly used in epoxy resin, polyurethane, and textile coating applications. | |
| Exolit® AP 420 | Clariant Plastics & Coatings Ltd. | Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate. | |
| Exolit® AP 422 | Clariant Plastics & Coatings Ltd. | Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. | |
| Exolit® AP 423 | Clariant Plastics & Coatings Ltd. | Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...展开 Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 462 | Clariant Plastics & Coatings Ltd. | Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...展开 Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. 收起 | |
| Exolit® AP 740 | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...展开 Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 740 F | Clariant Plastics & Coatings Ltd. | Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...展开 Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 收起 | |
| Exolit® AP 750 | Clariant Plastics & Coatings Ltd. | Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....展开 Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. 收起 | |
| Exolit® IFR 36 | Clariant Plastics & Coatings Ltd. | Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...展开 Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. 收起 | |
| GD-APP101 Crystalline Ⅱ | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP101 Crystalline Ⅱ is a white free-flowing powder ammonium polyphosphate. This product is largely insoluble in water and completely insoluble in organic solvent. GD-APP101 Crystalline Ⅱ is applied in solvent based intumescent coatings, water based ...展开 GD-APP101 Crystalline Ⅱ is a white free-flowing powder ammonium polyphosphate. This product is largely insoluble in water and completely insoluble in organic solvent. GD-APP101 Crystalline Ⅱ is applied in solvent based intumescent coatings, water based intumescent coatings, flame retardant for flexible and rigid urethane foams, and as a flame retardant for epoxies. 收起 | |
| GD-APP102 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP102 is a white free-flowing powder based on ammonium polyphosphate. This product has very low water solubility and a high phosphorus content. GD-APP102 is applied in intumescent coating and materials containing cellulose. | |
| GD-APP103 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins...展开 GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins, and unsaturated resins. 收起 | |
| GD-APP104 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP104 is a white free-flowing powder non-halogenated flame retardant based on GD-APP101, which develops its effectiveness through phosphorous/nitrogen synergism. This product is mostly used in a large range of thermoplastics, rubbers, and resins. | |
| Phos-Chek® P/42 | ICL Phosphate Specialty | Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent...展开 Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent paints and coatings, both water-based and solvent-based. It can also be applied to intumescent mastics, caulks, putties, sealants, epoxies, films and adhesives, as well as polymer systems, including those based on polyethylene, polypropylene, polyurethane, rubber, acrylics and polyterephthalates. Building materials such as wall coverings, ceiling tiles, roofing products, wall panels, wood chip board and composites can also be used with the application of Phos-Chek® P/42. 收起 | Request Sample |
