| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1000是1.3.5 – 三甲基-1,3,5 – 三（3.3.3 – 三氟丙基）。它以白色晶体形式供货。 | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-1001是（3,3,3 - 三氟丙基）甲基二甲基硅烷。它以无色液体形式供货。 | |
| Acryloyloxy Modified Polysiloxane R-8303 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8303是一种丙烯改性聚硅氧烷。其较长的Si-O链长提供较好的润湿效果，同时保持良好的丙烯酰氧基反应活性。因此填料分散和耦合效应进一步加强。该产品可用于人造大理石和人造石英石。 | |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...展开 Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. 收起 | Request Sample |
| Aldirez BH | Incorez Ltd. | INCOZOL BH是一种醛亚胺潜伏性固化剂，暴露于湿气会水解，产生反应性胺交联剂和苯甲醛。它专门设计用于单组分聚氨酯系统，适合结合芳香族和脂肪族预聚物使用。潜伏性固化剂在高固含聚氨酯系统中特别有益，因为它们增加了固化速度，无CO 2气体放出。该产品的一些典型应用是柔韧的接缝密封剂，弹性粘合的胶黏剂，以及一般密封和粘接化合物。 | Request Sample |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-804是一种铝酸盐耦合剂。它可以用于涂料和油漆，提高底漆的粘合力和储存稳定性。这款产品可在含-OH的树脂中用作耦合剂。 | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-805是aluminum-iv-acetylacetonate，以白色粉末形式供货。它可以用于涂料和油漆，提高底漆的粘合力和储存稳定性。这款产品可在一些特种树脂中用作耦合剂。 | |
| Amino Modified Polysiloxane R-8104 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8104是一种氨基改性聚硅氧烷。它有良好的氨基酸反应活性和耦合效应，并提供更好的储存性和低挥发性。这款产品广泛用于改性塑料和涂料应用。 | |
| Amirez 142 | Incorez Ltd. | 这是一个活性水基乳液状液体环氧树脂固化剂。 和环氧树脂反映后能形成坚硬、耐久、高光的涂层，适用于地板或墙面。 | Request Sample |
| Amirez 148/010 | Incorez Ltd. | 用于环氧树脂的活性聚胺加合固化助剂。能够乳化大多数液态环氧树脂。通过化学反应可以与环氧交联，获得一种坚韧的耐久性聚合物。 | Request Sample |
| Amirez 148/024 | Incorez Ltd. | 用于环氧树脂的活性聚胺加合固化助剂。能够乳化大多数液态环氧树脂。通过化学反应可以与环氧交联，获得一种坚韧的耐久性聚合物。 | Request Sample |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...展开 Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. 收起 | Request Sample |
| Chlorinated Polypropylene (CPP) | Anhui Elite Industrial Co., Ltd | Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone...展开 Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone, fire, and thermal aging resisting properties. This product is mainly used as an adhesive agent for printing ink and plastic ink. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Diamino Modified Polysiloxane R-8105 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8105是一种氨基改性聚硅氧烷。它有良好的氨基酸反应活性和耦合效应，并提供更好的储存性和低挥发性。这款产品广泛用于改性塑料和涂料应用。 | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Dispurez 101 | Incorez Ltd. | Dispurez 101是一种高耐热，坚硬的结晶水性聚氨酯分散体，具有出色的耐化学性。适用于透明的保护性面漆和清漆。应用以后，水会蒸发形成一层坚韧透明，具有良好光泽度的膜。从Dispurez 101衍生出的膜显示出出色的耐水和耐化学性。 这款产品可以迅速变硬，因此十分适合用于各种表面涂料行业的终端应用。它特别适合在硬质塑料基材上用作硬涂层。 | Request Sample |
| Dispurez 101A | Incorez Ltd. | Dispurez 101A是一种硬质聚氨酯丙烯酸分散剂，专为需要出色的色彩相容性的应用设计。它非常适合用于具有良好耐用性的涂料。从Incorez Dispurez 101A衍生出来的膜具有出色的耐水和耐化学性。 这款产品可以迅速变硬，因此十分适合用于各种表面涂料行业的终端应用，特别是工业木器漆，卫生涂料和塑料涂料。 | Request Sample |
| Dispurez 102 | Incorez Ltd. | Dispurez 102是一款灵活，有韧性，自交联聚氨酯分散剂，具有出色的光透明性，出色的耐化学性和抗粘着性。应用以后，水会蒸发形成一层坚韧透明，具有良好光泽度的膜。从Dispurez 102衍生出的膜显示了出色的耐化学，耐污染和抗紫外线性能。 | Request Sample |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...展开 Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. 收起 | Request Sample |
| Dispurez 201 | Incorez Ltd. | Dispurez 201是一种不含VOC的聚氨酯分散体，它柔和且具有韧性，有良好的耐冲击和低温灵活性。 | Request Sample |
| Epoxy Modified Polysiloxane R-8202 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8202是环氧改性聚硅氧烷。它保持着良好的环氧反应活性，耦合效应，并提供更好的存储活性。这款产品广泛用于改性塑料和涂料领域，并推荐用于水性系统。 | |
| Functional Polysiloxane R-8204 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8204是功能性聚氧硅氧烷。它提供出色的水溶性，更好的水溶液稳定性和良好的浸渍液和玻璃纤维的组合。 | |
| Functional Polysiloxane R-8504 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8504是一种与传统硅氧烷比较具有较好的润湿效果的官能化聚硅氧烷，可以使填料获得更好的分散性。与此同时，它依然保持良好的乙烯基反应的活性，使耦合效应突出。该产品可用于无卤阻燃电缆化合物。 | |
| Glass Beads / Glass Microspheres | Anhui Elite Industrial Co., Ltd | Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traf...展开 Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traffic marking paint. 收起 | |
| Grinding Dispersant FD-6001 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6001是一种研磨分散剂，用于无机颜料和填料。它有助于改善粉末流动性和减少能源消耗，减少粉末吸收量，改善粉末在塑料和橡胶制品中的分散，并改善下游产品的表面光滑度。这款产品特别推荐用于二氧化钛，氢氧化铝，滑石和碳酸钙。 | |
| Hollow Glass Microspheres T20 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adj...展开 Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T25 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adj...展开 Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T32 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adj...展开 Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T40 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adj...展开 Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T46 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adj...展开 Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T60 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adj...展开 Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adjusts the density of paint. 收起 | |
| Incozol 2 | Incorez Ltd. | 呃唑烷一般用作聚氨酯涂料和封闭剂的有效去湿剂，可用于去除溶剂、多元醇和预聚物，以及增塑剂和颜料中残留的湿气。 | Request Sample |
| Incozol 4 | Incorez Ltd. | 二呃唑烷固化助剂，用于制备聚氨酯漆、封闭剂和弹性体。 | Request Sample |
| Incozol EH | Incorez Ltd. | Incozol是一种用于 1 K聚氨酯涂料、胶粘剂、密封剂和弹性体的聚氨酯双恶唑烷潜伏性固化剂。与低NCO的氨酯预聚物结合使用,该固化剂可以通过水分触发机制加速预聚物的处理，以负担1 K聚氨酯的交联效应。 | Request Sample |
| Incozol LV | Incorez Ltd. | 可用作多功能固化助剂，具有较大的配方灵活性。这是一种无溶剂型产品，可与所有INCOREZ 700和800系列脂肪族预聚物配合使用。 | Request Sample |
| Polyamide Resin | Anhui Elite Industrial Co., Ltd | Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting prop...展开 Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting property. It has applications in various gravure plastic printing ink, plastic flexibility issue printing, overprinting varnish and heat seal coating and heating seal beaded paint. 收起 | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-408是具有低表面张力和良好透气性的聚醚改性硅氧烷。由于它具有出色的延展性和渗透性，可以用作涂料和水基油墨的基底湿润剂。这款产品还可以用作水基聚氨酯的湿润剂和流平剂。 | |
| Polyketone Resin | Anhui Elite Industrial Co., Ltd | Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resin...展开 Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resins used in paint and inks. Polyketon Resin provides glossiness, adhesion, wettabillity, and hardness to paints, coatings, and inks. 收起 | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8004 Siloxane Masterbatch是一种超高分子量硅氧烷聚合物。它提供更好的加工流动性，润滑性和塑料脱模能力以减少设备摩擦损耗和减少积聚。它还提供更好的抗刮擦性，出色的稳定性，低流动性，更好的阻燃性以及更高的电缆速度。这款产品是硅润滑剂，在塑料行业中用作处理剂。还可以用于减少玻璃纤维增强复合材料的表面缺陷。R-8004有高于70%的硅氧烷含量。 | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8005 Siloxane Masterbatch是一种超高分子量硅氧烷聚合物。它提供更好的加工流动性，润滑性和塑料脱模能力以减少设备摩擦损耗和减少积聚。它还提供更好的抗刮擦性，出色的稳定性，低流动性，更好的阻燃性以及更高的电缆速度。这款产品是硅润滑剂，在塑料行业中用作处理剂。还可以用于减少玻璃纤维增强复合材料的表面缺陷。R-8004有高于70%的硅氧烷含量。 | |
| R-8012 Masonry Water Repellent | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8012 Masonry Water Repellent是硅氧烷乳液。它具有出色的防水性能，高透气性，能减少基材吸收水分，并有出色的涂层性能。这款产品推荐用于混凝土，石头，砖瓦，木材，涂料和石膏砂浆防水处理。 | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8601 Alkyl Modified Polysiloxane提供实用反应性，良好的表面湿润性和低沉淀性。它的优势还包括全面的通用性，更好的复合材料机械性能以及无机填料和聚合物之间更好的相容性。 | |
| Silane Couping Agent FD‐1106 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Silane Couping Agent FD‐1106是一款铝改性硅烷。它以无色透明液体形式供货。它在基质树脂和无机填料中应用。这款产品还用于热缩材料中，处理Mg(OH)2和Al(OH)3，可以显著减少Mg(OH)2和Al(OH)3的吸水性，提高与树脂的相容性，并可以改进产品的物理性能和表面完成度。 | |
| Silane Coupling Agent 150 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent i...展开 Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent in glass fiber and reinforced plastics. 收起 | |
| Silane Coupling Agent ELT-S 341 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generate...展开 Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generates hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 672 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provide...展开 Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provides hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silane Coupling Agent ELT-TEOS | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive i...展开 Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive in paints and coatings. 收起 | |
| Silane Coupling Agent FD-6150 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-6150是一种改性氨基-烷基多官能低聚硅烷。它用作粘性促进剂十分有效。FD-6150的特点包括在无底漆基材上更好的粘合性，更快的固化速度，减少黄变，更好的疏水性，更大的灵活性和低VOC。 | |
| Silane Coupling Agent KH-151 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radica...展开 KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms-copolymerization or grafting and to modify surfaces. It is used as a coupling agent in filled polymer systems, which cure via a free radical mechanism. It is also is used as a finish for glass or a binder additive in glass-reinforced polyester resins, as well as an integral additive in mineral-filled polyester or DAP resin compounds. 收起 | |
| Silane Coupling Agent KH-171 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and ...展开 KH-171 is a colorless transparent liquid used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The silane grafted polymer is processed as a thermoplastic and crosslinking occurs after fabrication of the finished article upon exposure to moisture. 收起 | |
| Silane Coupling Agent KH-172 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many...展开 KH-172 is a colorless transparent, vinyl-functional coupling agent that promotes adhesion among unsaturated, polyester-type resins or crosslinked polyethylene resins or elastomers and inorganic substrates, including fiber glass, silica, silicates and many metal oxides. When used as coupling agent, it reduces the sensitivity of the products mechanical and electrical properties to heat and/or moisture. 收起 | |
| Silane Coupling Agent KH-300 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in...展开 KH-300 is a colorless transparent liquid silane coupling agent. It is the main material to produce other silane coupling agents and a variety of silicone materials. As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in a variety of halogenated rubber, such as: neoprene rubber, chlorobutyl rubber, and chlorosulfonated polyethylene rubber. It is used to produce light-color products to improve various physical and mechanical properties. Also applied in anti mildew smell finishing agent, antistatic agent, and blood coagulant agent. 收起 | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...展开 KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. 收起 | |
| Silane Coupling Agent KH-360 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthenin...展开 KH-360 is a colorless, transparent liquid alkylalkoxysilane. It is an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, as well as a strengthening treatment agent for plastic-layer pressing material. The most common alkoxy crosslinkers are methoxy or ethoxy silanes due to their high reactivity. The reaction precedes by nucleophilic substitution usually in the presence of acid or base catalysts. Alkoxides react directly with silanols or with water to produce silanols. 收起 | |
| Silane Coupling Agent KH-370 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-370 is a colorless liquid alkylalkoxysilane, an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, a strengthening treatment agent for plastic-...展开 KH-370 is a colorless liquid alkylalkoxysilane, an important component in sol-gel systems. It is used as a crosslinking agent for room temperature cured silicone rubber, coupling agent for glass fiber and SiO2, a strengthening treatment agent for plastic-layer pressing material. The most common alkoxy crosslinkers are methoxy or ethoxy silanes due to their high reactivity. The reaction precedes by nucleophilic substitution usually in the presence of acid or base catalysts. Alkoxides react directly with silanols or with water to produce silanols. 收起 | |
| Silane Coupling Agent KH-550 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-550是一种多用氨基官能耦合剂，在多种应用中使用，使无机基质和有机聚合物更好的结合起来。该分子的含硅部分对基质提供更好的粘合性。主要氨基酸官能与多种热固性、热塑性和弹性体材料均能进行反应。它可以与水反应。应该采取预防措施，避免与空气中的水分接触。它在RTV硅和其它混合粘合剂中都是出色的的粘合促进剂。它同时也是用于混合和聚氨酯密封剂的底漆系统中的有效成分。 | |
| Silane Coupling Agent KH-551 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermopla...展开 KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-b...展开 KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Silane Coupling Agent KH-570 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-570 is a methacryl-functional silane. It is a clear, light and heat sensitive liquid with a faintly sweet odor. It is used as adhesion promoter at organic/inorganic interfaces, as a surface modifier, or as crosslinking of polymers. It is used as a coup...展开 KH-570 is a methacryl-functional silane. It is a clear, light and heat sensitive liquid with a faintly sweet odor. It is used as adhesion promoter at organic/inorganic interfaces, as a surface modifier, or as crosslinking of polymers. It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is also used to functionalize resins via radical initiated processes-copolymerization or grafting and to modify surfaces. 收起 | |
| Silane Coupling Agent KH-580 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | 硅烷偶联剂KH-580是一种长链烷基硅烷。它易于溶解于有机溶剂，如烃，醚和酮中。这款产品主要推荐与非有机材料同时使用，如玻璃和硅等。它可以改善与有机物质的混合能力，并赋予产品防水效果，提高产品的机械性能。 | |
| Silane Coupling Agent KH-591 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Silane Coupling Agent KH-591是一种多功能的巯基官能矽烷，可促进填料如氧化矽和硫交联橡胶之间的黏附力，例如NR、SBR、BR、EPDM等。 | |
| Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used ...展开 KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. 收起 | |
| Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-7180是一种有两个可水解乙氧基的多用途环氧有机反应硅烷。可以促进附着力，同时贮存期不会泛黄，同时还可以增强乳胶和水性胶粘剂及密封剂配方的物理性能。这款产品推荐用于汽车层压胶黏剂，家具层压胶黏剂以及植绒胶粘剂。 | |
| Silane Coupling Agent KH-792 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (co...展开 KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker(moisture crosslinking of polymers). The application as coupling agent leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane Coupling Agent KH-Si69 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3...展开 KH-Si69 is a pale yellow transparent liquid that is soluble in ethanol, acetone, benzene, toluene and other solvents. It is insoluble in water. KH-Si69 silane, is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3-triethoxysilylpropyl)tetrasulfide. It is used to improve the reinforcing capability of fillers with silanol group on their surface, and also as an integral part of curing systems to improve crosslinking network properties. It has crosslinking and accelerator activity in rubber compounds as a silane coupling agent. 收起 | |
| Solid Acrylic Resin ELT-66 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, we...展开 Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, weather and chemical resistance, leveling, and pigment dispersion to paint and inks. 收起 | |
| Solid Acrylic Resin ELT-725 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weath...展开 Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weather resistance to paint and inks. Solid Acrylic Resin ELT-725 is compatible with CAB, NC, and other resins. 收起 | |
| Tetraethoxysilane | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Tetraethoxysilane is a colorless transparent liquid. It is used as binders in paints and coatings and as silicone room temperature vulcanizing cross-linking agents. It is also used as binders in precision castings and as binders in ceramic. | |
| Thermoplastic Solid Acrylic Resin AR-01 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals,...展开 Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals, water, and abrasions. Thermoplastic Solid Acrylic Resin AR-01 provides adhesion, flexibility, dispersivity, and leveling to exterior coatings and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-01B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B ...展开 Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B provides adhesion, flexibility, dispersivity, leveling, and compatibility to industrial coating, floor coating and machinery enamel. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-02 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 pro...展开 Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 provides adhesion, flexibility, dispersivity, leveling, and compatibility to road marking and floor coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-04 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 pro...展开 Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-05 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 pro...展开 Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and industrial coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-06 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-06 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-80 and also provides chemical, water, and alcohol resistance. AR-06 prov...展开 Thermoplastic Solid Acrylic Resin AR-06 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-80 and also provides chemical, water, and alcohol resistance. AR-06 provides adhesion, flexibility, dispersivity, leveling, and compatibility to container and industrial coatings and machinery enamel. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-10 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-10 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 200-400 and also provides chemical, water, and alcohol resistance. AR-10 pro...展开 Thermoplastic Solid Acrylic Resin AR-10 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 200-400 and also provides chemical, water, and alcohol resistance. AR-10 provides adhesion, flexibility, dispersivity, leveling, and compatibility to exterior coatings and ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-13 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-13 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13 p...展开 Thermoplastic Solid Acrylic Resin AR-13 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13 provides adhesion, flexibility, dispersivity, leveling, and compatibility to high gloss industrial and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-13B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-13B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13B...展开 Thermoplastic Solid Acrylic Resin AR-13B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13B provides adhesion, flexibility, dispersivity, leveling, and compatibility to aluminum and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-17 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-17 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-17 p...展开 Thermoplastic Solid Acrylic Resin AR-17 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-17 provides adhesion, flexibility, dispersivity, leveling, and compatibility to leather varnish and ABS plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-24 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-24 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-24 pro...展开 Thermoplastic Solid Acrylic Resin AR-24 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-24 provides adhesion, flexibility, dispersivity, leveling, and compatibility to ceramic and heat sealing varnish. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-24B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-24B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-500 and also provides chemical, water, and alcohol resistance. AR-24B p...展开 Thermoplastic Solid Acrylic Resin AR-24B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-500 and also provides chemical, water, and alcohol resistance. AR-24B provides adhesion, flexibility, dispersivity, leveling, and compatibility to ceramic and heat sealing lacquers. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-396 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-396 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-200 and also provides chemical, water, and alcohol resistance. AR-396 p...展开 Thermoplastic Solid Acrylic Resin AR-396 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-200 and also provides chemical, water, and alcohol resistance. AR-396 provides adhesion, flexibility, dispersivity, leveling, and compatibility to environment friendly coatings and ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-40 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-40 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-700 and also provides chemical, water, and alcohol resistance. AR-40 pro...展开 Thermoplastic Solid Acrylic Resin AR-40 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-700 and also provides chemical, water, and alcohol resistance. AR-40 provides adhesion, flexibility, dispersivity, leveling, and compatibility to appliance and glass paint. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-44 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-44 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-44 pr...展开 Thermoplastic Solid Acrylic Resin AR-44 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-44 provides adhesion, flexibility, dispersivity, leveling, and compatibility to fluorocarbon paint, screen printing ink, industrial coating and metal varnishes. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-53 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-53 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-53 pro...展开 Thermoplastic Solid Acrylic Resin AR-53 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-53 provides adhesion, flexibility, dispersivity, leveling, and compatibility to ink and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-58 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-58 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2400-2800 and also provides chemical, water, and alcohol resistance. AR-58 p...展开 Thermoplastic Solid Acrylic Resin AR-58 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2400-2800 and also provides chemical, water, and alcohol resistance. AR-58 provides adhesion, flexibility, dispersivity, leveling, and compatibility to floor and industrial coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-66 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-66 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-66 p...展开 Thermoplastic Solid Acrylic Resin AR-66 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-66 provides adhesion, flexibility, dispersivity, leveling, and compatibility to plastic and container coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-725 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-725 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-725 p...展开 Thermoplastic Solid Acrylic Resin AR-725 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-725 provides adhesion, flexibility, dispersivity, leveling, and compatibility to plastic coatings and PVC ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-728 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-728 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-600 and also provides chemical, water, and alcohol resistance. AR-728 p...展开 Thermoplastic Solid Acrylic Resin AR-728 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-600 and also provides chemical, water, and alcohol resistance. AR-728 provides adhesion, flexibility, dispersivity, leveling, and compatibility to hard plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-9820 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-9820 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-982...展开 Thermoplastic Solid Acrylic Resin AR-9820 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-9820 provides adhesion, flexibility, dispersivity, leveling, and compatibility to aluminum paint and plastic coatings. 收起 | |
| Titanate Coupling Agent FD-806 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-806是一种以钛为基础的耦合剂。FD-806应用时溶剂会蒸发，乙酰丙酮钛和存在于基质、油墨和涂料材料中的反应基团会发生交联反应形成桥梁。钛酸盐在树脂和基质之间的桥梁作用可以改善印刷油墨和涂料的粘附能力。 | |
| Titanate Coupling Agent FD‐807 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-807是一种以钛为基础的耦合剂。主要用于油漆和打印油墨中，乙酰丙酮钛和存在于基质、油墨和涂料材料中的反应基团会发生交联反应形成桥梁。钛酸盐在树脂和基质之间的桥梁作用可以改善印刷油墨和涂料的粘附能力。 | |
| Titanate Coupling Agent FD-808 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | FD-808是一种以钛为基础的耦合剂。FD-808应用时溶剂会蒸发，-OH，-COOH，-NH2，OCONH2和-SH等基团会发生交联反应从而形成桥梁。桥梁形成会引起分子量增加，从而改善耐热性，耐化学性，耐水性和干燥性能。 | |
| Titanate Coupling Agent FD‐BTP | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | Titanate coupling agent FD‐BTP是一种外观为黄色黏稠液体的聚正丁基钛酸，主要用来作为酯化反应和酯交反应中的交联剂和催化剂，且可用于油漆与涂料工业。 |
