| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| Anti-Reflective Application Nano Alumina B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2具有小的粒径和出色的分散性，使其在抗反射涂层中十分有效。它可以用于光伏玻璃和PET中。它可以通过减少光反射的方式增加透光率。 | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Boehmite for Lithium-ion Battery Separator B8014-L4 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014-L4 is a boehmite powder with small particle size, high temperature resistance, and low hardness. It can be used as a coating on Lithium-ion battery separators. | |
| Dripping and Anti-Fogging Agent B8203 for Agricultural Film | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Dripping and Anti-Fogging Agent B8203由三部分组成：B8203-A，B8203-B和B8203-C。它是环保无污染的。这款产品可用于温室PE膜的防雾涂料，具有快速滴落和长效耐久的防雾效果。 | |
| High Purity Dispersible Nano Alumina-B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款高纯度纳米氧化铝产品，粒径小并有出色的分散能力。它可以通过降低光反射率增加透明度，因此适用于抗反射涂层。这款产品可用于光电玻璃和PET中。 | |
| High Purity Dispersible Nano Alumina-B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts...展开 B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts support, ceramic additives and paint fillers. 收起 | |
| Ink Absorbing Coating for Textile and Canvas B8204 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8204是水基油墨吸收涂层。它主要用作室内纺织品，横幅，织物和帆布的油墨吸收层。这款产品无毒，无污染，有出色的色彩还原性，印刷精度，耐水性和灵活性。 | |
| Inorganic Nanoparticles Emulsifier B8013 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8013是小颗粒，高纯度的勃姆石粉末。它具有出色的分散和胶溶性能。这款产品可在油墨和涂料中用做颗粒乳化剂。这款产品颗粒大小为5-10nm。 | |
| Inorganic Nanoparticles Emulsifier B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8014是一种小粒度，高纯度勃姆石粉末。它具有出色的分散性和胶溶性。这款产品可在油墨和涂料中用作乳化剂颗粒。这款产品的颗粒大小为10-20nm | |
| Nano Alumina (Catalyst Support, Ceramic Filler) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in au...展开 Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in automotive exhaust purification, industrial emissions processing and in the refinery industry. It can be also used as ceramic filler. It is a practical and effective product for improving the thermal stability and mechanical strength of materials. 收起 | |
| Nano Alumina For Inkjet Coating G11 (Neutral) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet...展开 G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet coating. 收起 | |
| Nano Alumina-B8013-2 Coagulant for Paint Fog | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款具有小粒径和出色分散性的纳米氧化铝产品。它有较大的表面积，在表面上还有正电荷和活性羟基。这款产品可在雾状涂料中用作凝结剂和脱粘剂。 | |
| Paint Detackification Agent B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | 油漆脱粘剂B8013具有优异的脱粘性、透明度高，且容易分散。它可用于喷漆室废水脱粘漆剂、水性或溶剂型涂料废水，金属离子废水。 | |
| Polycol T-08 H | Polygal AG | Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stic...展开 Polycol T-08 H is a highly etherified polysaccaride with low viscosity, mainly used as a water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. POLYCOL T-08 H offers superior water retention (open time) at same dosage compared to other POLYCOL products. 收起 | |
| Polycol T-15 | Polygal AG | POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering...展开 POLYCOL T-15 is a etherified polysaccaride with medium viscosity, mainly used as a cost effective water-retention and thickening agent. The product is particularly adapted to being used for enhanced rheological behaviour, application ease and for lowering the stickiness on the trowelling equipment in different kind of building chemical products like gypsum- and cement plasters, renders, fillers and mortars. 收起 | |
| Polycol WP-001 | Polygal AG | POLYCOL WP-001 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, POLYCOL WP-001 stabi...展开 POLYCOL WP-001 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, POLYCOL WP-001 stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-001 show nearly newtonian behaviour; i.e. the viscosity does almost not change with increasing shear-rate, independent of time (no thixotropy). 收起 | |
| Polycol WP-001 W | Polygal AG | POLYCOL WP-001 W is a etherified polysaccaride with a very low viscosity mainly used for a controlled water release of dry mortar preparations like self-levelling screeds, gypsum based finishing plasters, and skim coats. | |
| Polycol WP-004 | Polygal AG | POLYCOL WP-004 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, Polycol WP-004 stabi...展开 POLYCOL WP-004 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, Polycol WP-004 stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-004 show nearly newtonian behaviour; i.e. the viscosity does almost not change with increasing shear-rate, independent of time (no thixotropy). 收起 | |
| Polycol WP-05 | Polygal AG | POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pig...展开 POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-05 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-05 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-05 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. 收起 | |
| Polycol WP-10 | Polygal AG | POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...展开 POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-10 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-10 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-10 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. 收起 | |
| Polycol WP-15 | Polygal AG | POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...展开 POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-15 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-15 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-15 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. 收起 | |
| Polycol WP-20 | Polygal AG | POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pi...展开 POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-20 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-20 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-20 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. 收起 | |
| Printing primer/B3320Y | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can impro...展开 B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can improve surface tension and provide good UV printability. 收起 |
