| A121 | Sino-American Pigment Systems, Inc. | A121, in the form of a white powder, is an anatase titanium dioxide pigment. This product can be used in printing inks, interior paints, paper coatings, and ceramics. It offers whiteness, dispersibility, and good hiding power. | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| Anti-Reflective Application Nano Alumina B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2具有小的粒径和出色的分散性，使其在抗反射涂层中十分有效。它可以用于光伏玻璃和PET中。它可以通过减少光反射的方式增加透光率。 | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Barium Metaborate | Sino-American Pigment Systems, Inc. | Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product con...展开 Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product contains at most 1% moisture. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 198-BT, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm | Sino-American Pigment Systems, Inc. | BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Boehmite for Lithium-ion Battery Separator B8014-L4 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014-L4 is a boehmite powder with small particle size, high temperature resistance, and low hardness. It can be used as a coating on Lithium-ion battery separators. | |
| Dripping and Anti-Fogging Agent B8203 for Agricultural Film | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Dripping and Anti-Fogging Agent B8203由三部分组成：B8203-A，B8203-B和B8203-C。它是环保无污染的。这款产品可用于温室PE膜的防雾涂料，具有快速滴落和长效耐久的防雾效果。 | |
| EME1900 | Sino-American Pigment Systems, Inc. | EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy res...展开 EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy resins. This product has a very low viscosity and is compatible at all concentrations with epoxy resins. Resulting blends can be cured using any epoxy curing agents. 收起 | |
| FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Glass Beads, Type I | Sino-American Pigment Systems, Inc. | Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. ...展开 Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. Its density lies between 2.4 and 2.6 g/cm3 and its refractive index is greater than 1.5. 收起 | |
| Glass Beads, Type III | Sino-American Pigment Systems, Inc. | Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 an...展开 Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 and 2.6 g/cm3 and its compressive strength is greater than 1200N. 收起 | |
| High Purity Dispersible Nano Alumina-B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款高纯度纳米氧化铝产品，粒径小并有出色的分散能力。它可以通过降低光反射率增加透明度，因此适用于抗反射涂层。这款产品可用于光电玻璃和PET中。 | |
| High Purity Dispersible Nano Alumina-B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts...展开 B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts support, ceramic additives and paint fillers. 收起 | |
| Ink Absorbing Coating for Textile and Canvas B8204 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8204是水基油墨吸收涂层。它主要用作室内纺织品，横幅，织物和帆布的油墨吸收层。这款产品无毒，无污染，有出色的色彩还原性，印刷精度，耐水性和灵活性。 | |
| Inorganic Nanoparticles Emulsifier B8013 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8013是小颗粒，高纯度的勃姆石粉末。它具有出色的分散和胶溶性能。这款产品可在油墨和涂料中用做颗粒乳化剂。这款产品颗粒大小为5-10nm。 | |
| Inorganic Nanoparticles Emulsifier B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8014是一种小粒度，高纯度勃姆石粉末。它具有出色的分散性和胶溶性。这款产品可在油墨和涂料中用作乳化剂颗粒。这款产品的颗粒大小为10-20nm | |
| Nano Alumina (Catalyst Support, Ceramic Filler) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in au...展开 Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in automotive exhaust purification, industrial emissions processing and in the refinery industry. It can be also used as ceramic filler. It is a practical and effective product for improving the thermal stability and mechanical strength of materials. 收起 | |
| Nano Alumina For Inkjet Coating G11 (Neutral) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet...展开 G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet coating. 收起 | |
| Nano Alumina-B8013-2 Coagulant for Paint Fog | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款具有小粒径和出色分散性的纳米氧化铝产品。它有较大的表面积，在表面上还有正电荷和活性羟基。这款产品可在雾状涂料中用作凝结剂和脱粘剂。 | |
| Paint Detackification Agent B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | 油漆脱粘剂B8013具有优异的脱粘性、透明度高，且容易分散。它可用于喷漆室废水脱粘漆剂、水性或溶剂型涂料废水，金属离子废水。 | |
| Printing primer/B3320Y | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can impro...展开 B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can improve surface tension and provide good UV printability. 收起 | |
| R208 | Sino-American Pigment Systems, Inc. | R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil ab...展开 R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil absorption. 收起 | |
| R255z/R255 | Sino-American Pigment Systems, Inc. | R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber appli...展开 R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber applications. It has been treated with organic and inorganic surface material and offers good hiding, brightness, and dispersibility. 收起 | |
| SR50 | Sino-American Pigment Systems, Inc. | SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| SR52 | Sino-American Pigment Systems, Inc. | SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| SR54 | Sino-American Pigment Systems, Inc. | SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| SR56 | Sino-American Pigment Systems, Inc. | SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| SR58 | Sino-American Pigment Systems, Inc. | SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| SR60 | Sino-American Pigment Systems, Inc. | SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| SR62 | Sino-American Pigment Systems, Inc. | SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| SR64 | Sino-American Pigment Systems, Inc. | SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展开 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展开 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...展开 STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. 收起 | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...展开 STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. 收起 | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...展开 STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...展开 STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...展开 STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...展开 STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...展开 STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展开 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展开 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展开 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展开 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展开 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展开 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展开 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展开 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展开 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...展开 STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. 收起 | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...展开 STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展开 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 |
