| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂，可用于需要高溶解性的应用场合 | |
| GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
| GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
| GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
| GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
| GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
| GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
| GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HDK® H13L | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H15 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H20 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® H2000 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® N20 | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® N20D | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® T30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。 | |
| HDK® T40 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产粉末物质时用作松散助剂。 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展开 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展开 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展开 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展开 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Mileflame FR 20-25 | MPI Chemie B.V. | Mileflame FR 20-25 is potassium perfluorobutane sulfonate in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame FR 5060 | MPI Chemie B.V. | Mileflame FR 5060 is a white crystal powder used as a non-halogenated flame retardant in coating applications. | |
| Mileflame HPCTP | MPI Chemie B.V. | Mileflame HPCTP is hexaphenoxycyclotriphosphazene in the form of a white crystal powder / flakes. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 1000 | MPI Chemie B.V. | Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the fl...展开 Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the flame retardancy of this product. 收起 | |
| Mileflame NP 2000 | MPI Chemie B.V. | Mileflame NP 2000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 3000 | MPI Chemie B.V. | Mileflame NP 3000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 4000 | MPI Chemie B.V. | Mileflame NP 4000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-1000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-2000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Milestat 1013 | MPI Chemie B.V. | Milestat 1013 is a glycerol mono stearate in the form of white pastilles. It is used as an antistatic agent and makes the surface or material itself slightly conductive. | |
| Milestat 129-V | MPI Chemie B.V. | Milestat 129-V is a glycerol mono stearate in the form of white free flowing powder. It is used as an antistatic agent and makes the surface or material itself slightly conductive. | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系 | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 450 | MPI Chemie B.V. | MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright CBS-X | MPI Chemie B.V. | MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-1 | MPI Chemie B.V. | MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-2 | MPI Chemie B.V. | MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-3 | MPI Chemie B.V. | MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright FP 127 | MPI Chemie B.V. | MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications. | |
| NO SED | Bernd Schwegmann GmbH & Co. KG | 防沉降助剂，适合溶剂型涂料 | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 | |
| POL-2322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起 | |
| POL-2325 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起 | |
| POL-2328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起 | |
| POL-2338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-2345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 2500 and a Hydroxyl Value of 42-48 mgKOH/g. 收起 | |
| POL-2356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000 which can be adjusted as needed. 收起 | |
| POL-2365 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 63-67 mgKOH/g and a Molecular Weight of 1700 which can be adjusted as needed. 收起 | |
| POL-2375 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a a Molecular Weight of 1500 and a Viscosity of 1000cps @ 60°C. 收起 | |
| POL-238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase...展开 POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 3000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-2428 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 26-30 mgKOH/g and a Molecular Weight of 4000. 收起 | |
| POL-2456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 2000 and a Viscosity of 1500 cps @ 60°C. 收起 | |
| POL-2466 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1700 and a Viscosity of 2000 cps @ 60°C. 收起 | |
| POL-2476 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1500 and a Hydroxyl Value of 71-79 mgKOH/g. 收起 | |
| POL-2500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-256 | Qingdao Xinyutian Chemical Co., Ltd. | POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase...展开 POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 2000 but can be adjusted based on the requirements of the customer. 收起 |
