| Zinc Octoate 18% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zinc Octoate 18% (in D80) | Patcham LTD | Zinc Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zinc is a strong through drier. It slows surface dry slightly and gives harder films. | Request Sample |
| Zinc Octoate 8% | Patcham LTD | 辛酸锌（ZINC OCTOATE） 8%用作油漆催干剂 | Request Sample |
| Zirconium Neo 18% (in BD) | Patcham LTD | Zirconium Neo 18% (in BD) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 10% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 10%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 12%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 12% (in D80) | Patcham LTD | Zirconium Octoate 12% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 18% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 18%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 18% (in D80) | Patcham LTD | Zirconium Octoate 18% (in D80) is used as a secondary drier in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. Zirconium is a powerful through drier and is the most widely used. | Request Sample |
| Zirconium Octoate 24% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 24%用作油漆催干剂 | Request Sample |
| Zirconium Octoate 6% | Patcham LTD | 辛酸锆（ZIRCONIUM OCTOATE） 6%用作油漆催干剂 | Request Sample |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. 收起 | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. 收起 | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. 收起 | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. 收起 | |
| Solventborne 2K PU White Topcoat (Formulation #21-20001) | Patcham LTD | This solventborne 2K PU white topcoat features Pat-Add DA 1801. It is suitable for general industrial coatings, wood coatings, and auto refinish coatings. | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| Waterborne Epoxy Primer (Formulation #21- 10001) | Patcham LTD | This waterborne epoxy primer features Pat-Add DA 817. It is suitable for general industrial coatings. | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...展开 Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. 收起 | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | 该ASC样品自动进样系统可一次同时全自动测量32个样品，包括测量系统的清洗。可按照实验室质量和精度进行质量控制和全流变学分析。 |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金属，是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程，懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滚球式粘度计，通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济，可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 该新的MCR流变仪拥有最新的技术。EC运动技术，低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试，转动或振动模式，都可用MCR流变仪测量。该系统的模块化设计，可适合宽广的温度范围的装置和特定程序的应用。 |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先进的质量控制流变仪，也可用于研发。结合了无与伦比的性能，易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承，还有一个单独的控制单元。 |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | 易于使用，灵活且功能强大 - RheoPlus软件用于所有Anton Paar流变仪，从质量控制仪器到高通量的流变仪。不同用户可轻松切换方法模块以及测量数据。该迄今为止最先进的软件可提供大量的模板，自动测量以及在RheoManager上处理数据，一个LIM/SAP界面，和21 CFR 的11章的兼容。 |  |
