| Amorphic™ A450 | Bunge Amorphic Solutions, LLC. | Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. 收起 | |
| Amorphic™ A950 | Bunge Amorphic Solutions, LLC. | Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...展开 Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. 收起 | |
| Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...展开 Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. 收起 | |
| Amorphic™ I700 | Bunge Amorphic Solutions, LLC. | Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...展开 Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. 收起 | |
| Bitoner® C5 Resin BT-2104 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wa...展开 Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wax cloud point, low odor, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起 | |
| Bitoner® C9 Resin BP-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low...展开 Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-100 has recommended applications in sealants, shoe adhesives, rubber, coatings, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展开 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展开 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Hydrogenated C9 Resins H-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS...展开 Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-120 has recommended applications in solvent adhesives, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展开 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起 | |
| Bitoner® Resin BT-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in th...展开 Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, rubber, sealants, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-1102 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in t...展开 Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, coatings, sealants, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-1200H | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low ...展开 Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low odor, low volatility, and water resistance. BT-1200H has recommended applications in sealants, wax modifications, asphalt modification, rubber, coatings, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-2110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stabili...展开 Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stability, low odor, low volatility, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起 | |
| Bitoner® Resin C-2120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起 | |
| Bitoner® Resin C-2125 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起 | |
| Bitoner® Resin C2130 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot m...展开 Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin DH-1110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and...展开 Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and good compatibility. DH-1110 has recommended applications in hot melt adhesives, sealants, pressure sensitive adhesives, and wax modifications. 收起 | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展开 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起 | |
| Bitoner® Resin TR-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...展开 Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin TR-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appl...展开 Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin TR-2080 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...展开 Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| CAVASOL® W7 M TL | Wacker Chemie AG 瓦克化学 | CAVASOL® W7 M TL是一种来自Wacker公司的标准样品甲基-β-环糊精的50%水溶液。VASOL® W7 M TL是这种高溶解性β-环糊精衍生物的最低价格版本。它是最有效的溶解助剂，可用于需要高溶解性的应用场合 | |
| GENIOSIL® GF 31 | Wacker Chemie AG 瓦克化学 | 3-甲基丙烯酰氧基丙基三甲氧基硅烷 | |
| GENIOSIL® GF 56 | Wacker Chemie AG 瓦克化学 | 乙烯基三乙氧基硅烷 | |
| GENIOSIL® GF 82 | Wacker Chemie AG 瓦克化学 | 3-缩水甘油醚氧基丙基三乙氧基硅烷 | |
| GENIOSIL® GF 93 | Wacker Chemie AG 瓦克化学 | 3-氨基丙基三乙氧基硅烷 | |
| GENIOSIL® XL 10 | Wacker Chemie AG 瓦克化学 | 乙烯基三甲氧基硅烷 | |
| GENIOSIL® XL 12 | Wacker Chemie AG 瓦克化学 | 乙烯基二甲氧基甲基硅烷 | |
| GENIOSIL® XL 33 | Wacker Chemie AG 瓦克化学 | 甲基丙烯酰氧甲基三甲氧基硅烷 | |
| HDK® H13L | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H15 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H20 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® H2000 | Wacker Chemie AG 瓦克化学 | 合成的憎水的无定形硅土，通过火焰水解法制备 | |
| HDK® H30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多应用中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产工业粉末时用作松散助剂。 | |
| HDK® N20 | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® N20D | Wacker Chemie AG 瓦克化学 | 合成的亲水的无定形硅土，通过火焰水解法制备 | |
| HDK® T30 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料。 | |
| HDK® T40 | Wacker Chemie AG 瓦克化学 | 一种合成气相二氧化硅，在很多有机系统中用作增稠和触变剂。它也可以用作弹性材料的增强填充料，在生产粉末物质时用作松散助剂。 | |
| SILRES® 601 | Wacker Chemie AG 瓦克化学 | 薄片硅树脂，含有苯基，和有机树脂具有好的兼容性。 | |
| SILRES® 603 | Wacker Chemie AG 瓦克化学 | 固体硅树脂，含有苯基，和有机聚合物具有好的兼容性。 | |
| SILRES® 604 | Wacker Chemie AG 瓦克化学 | 薄片硅树脂，和有机树脂具有好的兼容性。SILRES® 604 适合用作胶粘剂。SILRES® 604 以无溶剂固体树脂的形式供货。 | |
| SILRES® 605 | Wacker Chemie AG 瓦克化学 | 片状有机硅树脂，与有机树脂具有良好的相容性。SILRES® 605适合作为纯基料。SILRES® 605是不含溶剂的固体树脂 | |
| SILRES® 610 | Wacker Chemie AG 瓦克化学 | 是一种含甲基基团的有机硅树脂，推荐用作耐热性油漆的基料 | |
| SILRES® BS 1001 | Wacker Chemie AG 瓦克化学 | SILRES® BS 1001是一种可水稀释，无溶剂乳液，基于硅烷和硅氧烷混合物。SILRES® BS 1001的稀释溶液可作为高品质通用型防水剂，用于浸渍和打底矿物表面 | |
| SILRES® BS 1306 | Wacker Chemie AG 瓦克化学 | 一种助剂，用于生产水性砖石建筑涂料和水性底浆，改善拒水、耐水和水汽透过性能。它还改善水性涂料的加工性能和防结块性能。 | |
| SILRES® BS 290 | Wacker Chemie AG 瓦克化学 | 适用于给具有吸收性能的多孔矿物建筑材料，例如混凝土、矿物灰膏、水泥纤维板、灰砂砖、矿物基天然和人造石以及矿物涂料等，增添拒水性能。 | |
| SILRES® BS 43 N | Wacker Chemie AG 瓦克化学 | SILRES® BS 43 N是一种可水稀释有机硅树脂乳液，可作为基料用于制备有机硅树脂乳胶漆和有机硅树脂灰泥 | |
| SILRES® BS 45 | Wacker Chemie AG 瓦克化学 | SILRES® BS 45 是可以用水稀释的无溶剂硅树脂乳液，在生产硅树脂乳液涂料和灰膏中用作胶粘剂。 | |
| SILRES® BS 50 | Wacker Chemie AG 瓦克化学 | 用作硅酸盐乳液涂料和白涂料的疏水助剂。加入拒水剂时，就得到疏水涂料，颜料就不会被洗掉。明显增加了涂料的耐用性。 | |
| SILRES® BS 54 | Wacker Chemie AG 瓦克化学 | SILRES® BS 54是一种可水稀释、无溶剂的有机硅树脂乳液，可作为基料用于制备有机硅树脂乳胶漆和灰泥 | |
| SILRES® BS POWDER A | Wacker Chemie AG 瓦克化学 | SILRES® BS POWDER A是一种粉末状的高效有机硅防水助剂 | |
| SILRES® BS SMK 2100 | Wacker Chemie AG 瓦克化学 | SILRES® BS SMK 2100 一种不含溶剂的浓缩有机硅微乳液，主要成份是硅烷和硅氧烷，用水稀释后成为微乳液。 | |
| SILRES® HK 46 | Wacker Chemie AG 瓦克化学 | 是一种含甲基基团的有机硅树脂溶液，推荐用作耐热性油漆的基料 | |
| SILRES® HP 2000 | Wacker Chemie AG 瓦克化学 | 是一种氨基官能团，含甲基苯基基团的有机硅树脂溶液，推荐用作环氧树脂的固化剂 | |
| SILRES® IC 232 | Wacker Chemie AG 瓦克化学 | 是一种无溶剂，反应性的，甲氧基官能团甲基苯基聚硅氧烷，具有窄的分子量分布范围。非常适合将相容的有机硅组份引入其它基料体系中，以增加耐候性或耐热性 | |
| SILRES® IC 368 | Wacker Chemie AG 瓦克化学 | SILRES® IC 368是一种无溶剂、反应性甲氧基官能团甲基苯基聚硅氧烷，具有窄分子量分布。它非常适合用于引入相容的硅成分至其它基料体系，以提高耐候性或耐热性。它可用于卷材涂料和炊具涂料。 | |
| SILRES® IC 836 | Wacker Chemie AG 瓦克化学 | SILRES® IC 836是一种固体、硅烷醇官能团的苯基有机硅树脂，推荐用于有机树脂的有机硅改性 | |
| SILRES® KX | Wacker Chemie AG 瓦克化学 | 无机成份非常高(燃烧残余：固体树脂有88% SiO2)。用于耐热涂料的胶粘剂、空气干燥的含铝颜料的涂料和温度可达 500°C的高浓度黑颜料涂料。 | |
| SILRES® MP 50 E | Wacker Chemie AG 瓦克化学 | SILRES® MP 50 E是一种含甲基苯基基团的有机硅树脂乳液 | |
| SILRES® MSE 100 | Wacker Chemie AG 瓦克化学 | SILRES® MSE 100 是不同低聚甲基硅酸盐混合物的甲基酯。它可以水解并聚合成硬硅树脂。 | |
| SILRES® REN 50 | Wacker Chemie AG 瓦克化学 | 是一种含甲基苯基基团的有机硅树脂溶液，推荐用作耐热性油漆的基料 | |
| SILRES® REN 60 | Wacker Chemie AG 瓦克化学 | 耐高温和耐气候的烘烤涂料的胶粘剂，在在室温下干燥后不剥落。 | |
| SILRES® REN 80 | Wacker Chemie AG 瓦克化学 | 中等硬度甲基苯基硅树脂，推荐用作耐热、耐腐蚀和高固体含量的涂料的胶粘剂。 | |
| SILRES® SY 231 | Wacker Chemie AG 瓦克化学 | 一种无溶剂具有反应活性的带有甲氧基官能团的有机硅，分子量分布狭窄，平均分子量小，挥发组份含量非常低。使用它改性的涂料具有优异的光泽保持和耐粉化能力。 | |
| SILRES® SY 300 | Wacker Chemie AG 瓦克化学 | 一种具有反应活性的带有硅醇官能团的苯基丙基聚硅氧烷，是无溶剂固体树脂，适用于给有机树脂改性。 | |
| SILRES® SY 409 | Wacker Chemie AG 瓦克化学 | SILRES® SY 409是一种含甲基苯基基团的有机硅溶液，推荐作为基料结合其它有机树脂用于中等固体份或高固体份的耐热型油漆 | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| VINNAPAS® 224 HD | Wacker Chemie AG 瓦克化学 | VINNAPAS® 224 HD是一种已被证明的基准，适合各种应用 | |
| VINNAPAS® AF 474 | Wacker Chemie AG 瓦克化学 | VINNAPAS® AF 474是一种羟基官能团丙烯酸酯共聚物水性乳液 | |
| VINNAPAS® B 100/20 VLE | Wacker Chemie AG 瓦克化学 | 一种醋酸乙烯共聚物，它可以产生比均聚树脂更柔软的共聚物。它用于热活化的粘合涂料和粘合剂以及作为漆助剂。 | |
| VINNAPAS® B 1.5 SPECIAL | Wacker Chemie AG 瓦克化学 | 一种醋酸乙烯均聚物，用作纤维增强塑料、粘合剂、漆和胶基的原料。 | |
| VINNAPAS® B 30 SPECIAL | Wacker Chemie AG 瓦克化学 | 一种醋酸乙烯均聚物，用作纤维增强塑料、粘合剂、漆助剂和胶基的原料。 | |
| VINNAPAS® B 5 SPECIAL | Wacker Chemie AG 瓦克化学 | 一种醋酸乙烯均聚物，用作纤维增强塑料、粘合剂、漆助剂和胶基的原料。 | |
| VINNAPAS® B 60 SPEZIAL | Wacker Chemie AG 瓦克化学 | VINNAPAS® B 60 SPECIAL 是一种固体热塑性、高分子量均聚物。该透明、无色树脂由醋酸乙烯聚合制备。VINNAPAS® B 60 SPECIAL是无味道的 | |
| VINNAPAS® DP 500 | Wacker Chemie AG 瓦克化学 | VINNAPAS® DP 500是一种水性，不含增塑剂的聚合物乳液，由醋酸乙烯单体制备而成 | |
| VINNAPAS® EAF 380 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EAF 380是一种基于醋酸乙烯、乙烯和丙烯酸酯的水性聚合物乳液，设计用于户内户外应用。它不含含烷基酚乙氧基化物（APEO）的化合物 | |
| VINNAPAS® EF 3777 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EF 3777 是一种基于醋酸乙烯和乙烯的水性聚合物乳液。VINNAPAS® EF 3777不含溶剂和增塑剂，含极低含量的挥发性有机化合物。此外它不含含烷基酚乙氧基化物（APEO）的化合物 | |
| VINNAPAS® EF 8001 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EF 8001 是一种醋酸乙烯-乙烯（VAE）共聚物的水性乳液。它代表了VAE聚合物技术的新进展。它设计作为一种低VOC、不含APEO的乳胶，应用于环保和低气味油漆。它具有成本性能优势，可替代各种技术包括乙烯基丙烯酸和苯乙烯丙烯酸 | |
| VINNAPAS® EF 8300 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EF 8300是一种乙烯基醋酸乙烯酯（VAE）共聚物的水性乳液。它开发作为更高性能的聚合物用于户内建筑涂料配方，具有环保优势 | |
| VINNAPAS® EN 1033 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EN 1033是一种自交联、不含增塑剂的水性聚合物乳液，由单体醋酸乙烯和乙烯制备而成 | |
| VINNAPAS® EP 1 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EP 1 是一种不含增塑剂的聚合物乳液，由单体醋酸乙烯和乙烯制备而成 | |
| VINNAPAS® EP 116 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EP 116 是一种水性不含增塑剂的醋酸乙烯和乙烯共聚物乳液 | |
| VINNAPAS® EP 16 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EP 16 是一种中等粒径、不含增塑剂的、醋酸乙烯和乙烯共聚物水性乳液。它形成的涂膜具有良好的耐碱性，在低温下非常柔韧，耐光且不老化 |
